From: Krzysztof Kozlowski <krzk@kernel.org>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Stefan Agner <stefan@agner.ch>, Anson Huang <Anson.Huang@nxp.com>,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] dt-bindings: watchdog: fsl-imx: document i.MX compatibles
Date: Thu, 29 Oct 2020 17:13:10 +0100 [thread overview]
Message-ID: <20201029161310.GA29346@kozik-lap> (raw)
In-Reply-To: <20201029143508.GO28755@dragon>
On Thu, Oct 29, 2020 at 10:35:09PM +0800, Shawn Guo wrote:
> On Sat, Sep 26, 2020 at 06:23:00PM +0200, Krzysztof Kozlowski wrote:
> > Document all ARMv5, ARMv6 and ARMv7 i.MX compatibles used in DTSes (even
> > though driver binds only to fsl,imx21-wdt) to fix dtbs_check warnings
> > like:
> >
> > arch/arm/boot/dts/imx53-qsb.dt.yaml: gpio@53fe0000: compatible:
> > ['fsl,imx53-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemas
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> > .../devicetree/bindings/watchdog/fsl-imx-wdt.yaml | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > index 991b4e33486e..a06e70f44fd0 100644
> > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > @@ -18,10 +18,24 @@ properties:
> > - const: fsl,imx21-wdt
> > - items:
> > - enum:
> > + - fsl,imx25-wdt
> > + - fsl,imx27-wdt
> > + - fsl,imx31-wdt
> > + - fsl,imx35-wdt
> > + - fsl,imx50-wdt
> > + - fsl,imx51-wdt
> > + - fsl,imx53-wdt
> > + - fsl,imx6q-wdt
> > + - fsl,imx6sl-wdt
> > + - fsl,imx6sll-wdt
> > + - fsl,imx6sx-wdt
> > + - fsl,imx6ul-wdt
> > + - fsl,imx7d-wdt
> > - fsl,imx8mm-wdt
> > - fsl,imx8mn-wdt
> > - fsl,imx8mp-wdt
> > - fsl,imx8mq-wdt
>
> Could you add the following two as well?
>
> - fsl,ls1012a-wdt
> - fsl,ls1043a-wdt
I focused in these patches on i.MX but I can fix the Layerscape as well.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-watchdog@vger.kernel.org, Anson Huang <Anson.Huang@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>,
Rob Herring <robh+dt@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Fabio Estevam <festevam@gmail.com>,
Guenter Roeck <linux@roeck-us.net>
Subject: Re: [PATCH 1/3] dt-bindings: watchdog: fsl-imx: document i.MX compatibles
Date: Thu, 29 Oct 2020 17:13:10 +0100 [thread overview]
Message-ID: <20201029161310.GA29346@kozik-lap> (raw)
In-Reply-To: <20201029143508.GO28755@dragon>
On Thu, Oct 29, 2020 at 10:35:09PM +0800, Shawn Guo wrote:
> On Sat, Sep 26, 2020 at 06:23:00PM +0200, Krzysztof Kozlowski wrote:
> > Document all ARMv5, ARMv6 and ARMv7 i.MX compatibles used in DTSes (even
> > though driver binds only to fsl,imx21-wdt) to fix dtbs_check warnings
> > like:
> >
> > arch/arm/boot/dts/imx53-qsb.dt.yaml: gpio@53fe0000: compatible:
> > ['fsl,imx53-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemas
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> > .../devicetree/bindings/watchdog/fsl-imx-wdt.yaml | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > index 991b4e33486e..a06e70f44fd0 100644
> > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> > @@ -18,10 +18,24 @@ properties:
> > - const: fsl,imx21-wdt
> > - items:
> > - enum:
> > + - fsl,imx25-wdt
> > + - fsl,imx27-wdt
> > + - fsl,imx31-wdt
> > + - fsl,imx35-wdt
> > + - fsl,imx50-wdt
> > + - fsl,imx51-wdt
> > + - fsl,imx53-wdt
> > + - fsl,imx6q-wdt
> > + - fsl,imx6sl-wdt
> > + - fsl,imx6sll-wdt
> > + - fsl,imx6sx-wdt
> > + - fsl,imx6ul-wdt
> > + - fsl,imx7d-wdt
> > - fsl,imx8mm-wdt
> > - fsl,imx8mn-wdt
> > - fsl,imx8mp-wdt
> > - fsl,imx8mq-wdt
>
> Could you add the following two as well?
>
> - fsl,ls1012a-wdt
> - fsl,ls1043a-wdt
I focused in these patches on i.MX but I can fix the Layerscape as well.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-29 16:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-26 16:23 [PATCH 1/3] dt-bindings: watchdog: fsl-imx: document i.MX compatibles Krzysztof Kozlowski
2020-09-26 16:23 ` Krzysztof Kozlowski
2020-09-26 16:23 ` [PATCH 2/3] ARM: dts: imx: align watchdog node name with dtschema Krzysztof Kozlowski
2020-09-26 16:23 ` Krzysztof Kozlowski
2020-10-29 14:38 ` Shawn Guo
2020-10-29 14:38 ` Shawn Guo
2020-09-26 16:23 ` [PATCH 3/3] ARM: dts: vf: " Krzysztof Kozlowski
2020-09-26 16:23 ` Krzysztof Kozlowski
2020-10-29 14:39 ` Shawn Guo
2020-10-29 14:39 ` Shawn Guo
2020-09-29 19:13 ` [PATCH 1/3] dt-bindings: watchdog: fsl-imx: document i.MX compatibles Rob Herring
2020-09-29 19:13 ` Rob Herring
2020-10-29 14:35 ` Shawn Guo
2020-10-29 14:35 ` Shawn Guo
2020-10-29 16:13 ` Krzysztof Kozlowski [this message]
2020-10-29 16:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201029161310.GA29346@kozik-lap \
--to=krzk@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.