From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-amarula <linux-amarula@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 2/9] arm64: dts: rockchip: px30-engicam-edimm2.2: Enable LVDS panel
Date: Mon, 9 Nov 2020 23:40:10 +0530 [thread overview]
Message-ID: <20201109181017.206834-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201109181017.206834-1-jagan@amarulasolutions.com>
Engicam PX30.Core EDIMM2.2 developement Kit has on board 10" LVDS
panel from yes-optoelectronics.
This patch adds panel enablement nodes on respective dts(i) files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/rockchip/px30-engicam-common.dtsi | 4 ++
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 59 +++++++++++++++++++
.../dts/rockchip/px30-engicam-px30-core.dtsi | 5 ++
3 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index fbbdbb0a40af..8fdd7ff2fdf9 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -25,6 +25,10 @@ &gmac {
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&sdmmc {
cap-sd-highspeed;
card-detect-delay = <800>;
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
index cb00988953e9..449b8eb6454e 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -5,3 +5,62 @@
*/
#include "px30-engicam-common.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ panel {
+ compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ power-supply = <&vcc3v3_lcd>;
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
index db22f776c68f..cdacd3483600 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -192,6 +192,11 @@ regulator-state-mem {
};
};
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
vcc5v0_host: SWITCH_REG2 {
regulator-name = "vcc5v0_host";
regulator-always-on;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Jagan Teki <jagan@amarulasolutions.com>,
Suniel Mahesh <sunil@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula <linux-amarula@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] arm64: dts: rockchip: px30-engicam-edimm2.2: Enable LVDS panel
Date: Mon, 9 Nov 2020 23:40:10 +0530 [thread overview]
Message-ID: <20201109181017.206834-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201109181017.206834-1-jagan@amarulasolutions.com>
Engicam PX30.Core EDIMM2.2 developement Kit has on board 10" LVDS
panel from yes-optoelectronics.
This patch adds panel enablement nodes on respective dts(i) files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/rockchip/px30-engicam-common.dtsi | 4 ++
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 59 +++++++++++++++++++
.../dts/rockchip/px30-engicam-px30-core.dtsi | 5 ++
3 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index fbbdbb0a40af..8fdd7ff2fdf9 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -25,6 +25,10 @@ &gmac {
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&sdmmc {
cap-sd-highspeed;
card-detect-delay = <800>;
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
index cb00988953e9..449b8eb6454e 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -5,3 +5,62 @@
*/
#include "px30-engicam-common.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ panel {
+ compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ power-supply = <&vcc3v3_lcd>;
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
index db22f776c68f..cdacd3483600 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -192,6 +192,11 @@ regulator-state-mem {
};
};
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
vcc5v0_host: SWITCH_REG2 {
regulator-name = "vcc5v0_host";
regulator-always-on;
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Jagan Teki <jagan@amarulasolutions.com>,
Suniel Mahesh <sunil@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula <linux-amarula@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] arm64: dts: rockchip: px30-engicam-edimm2.2: Enable LVDS panel
Date: Mon, 9 Nov 2020 23:40:10 +0530 [thread overview]
Message-ID: <20201109181017.206834-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201109181017.206834-1-jagan@amarulasolutions.com>
Engicam PX30.Core EDIMM2.2 developement Kit has on board 10" LVDS
panel from yes-optoelectronics.
This patch adds panel enablement nodes on respective dts(i) files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/rockchip/px30-engicam-common.dtsi | 4 ++
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 59 +++++++++++++++++++
.../dts/rockchip/px30-engicam-px30-core.dtsi | 5 ++
3 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index fbbdbb0a40af..8fdd7ff2fdf9 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -25,6 +25,10 @@ &gmac {
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&sdmmc {
cap-sd-highspeed;
card-detect-delay = <800>;
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
index cb00988953e9..449b8eb6454e 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -5,3 +5,62 @@
*/
#include "px30-engicam-common.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ panel {
+ compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ power-supply = <&vcc3v3_lcd>;
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
index db22f776c68f..cdacd3483600 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -192,6 +192,11 @@ regulator-state-mem {
};
};
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
vcc5v0_host: SWITCH_REG2 {
regulator-name = "vcc5v0_host";
regulator-always-on;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-09 18:10 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 18:10 [PATCH 0/9] arm64: dts: rockchip: Engicam PX30.Core changes Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 1/9] arm64: dts: rockchip: px30-enagicam: Enable USB Host, OTG Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki [this message]
2020-11-09 18:10 ` [PATCH 2/9] arm64: dts: rockchip: px30-engicam-edimm2.2: Enable LVDS panel Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 3/9] dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 4/9] arm64: dts: " Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 5/9] arm64: dts: rockchip: px30-engicam: Add WiFi support Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 6/9] arm64: dts: rockchip: px30-engicam: Add BT support Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 7/9] arm64: defconfig: Enable ROCKCHIP_LVDS Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 8/9] arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` [PATCH 9/9] arm64: defconfig: Enable USB_SERIAL_CP210X Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-09 18:10 ` Jagan Teki
2020-11-30 1:51 ` [PATCH 0/9] arm64: dts: rockchip: Engicam PX30.Core changes Heiko Stuebner
2020-11-30 1:51 ` Heiko Stuebner
2020-11-30 1:51 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201109181017.206834-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=sunil@amarulasolutions.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.