From: Marc Kleine-Budde <mkl@pengutronix.de> To: netdev@vger.kernel.org Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Marc Kleine-Budde <mkl@pengutronix.de>, devicetree@vger.kernel.org Subject: [net v2 1/4] ARM: dts: imx: fix can fsl,stop-mode Date: Wed, 11 Nov 2020 14:05:04 +0100 [thread overview] Message-ID: <20201111130507.1560881-2-mkl@pengutronix.de> (raw) In-Reply-To: <20201111130507.1560881-1-mkl@pengutronix.de> Since commit: d9b081e3fc4b can: flexcan: remove ack_grp and ack_bit handling from driver the 4th and 5th value of the property "fsl,stop-mode" aren't used anymore. With the conversion of the flexcan binding to yaml this raises the following error during dtbs_check: arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: fsl,stop-mode:0: [1, 52, 28, 16, 17] is too long From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml This patch fixes the error by removing the obsolete values. Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/boot/dts/imx6qdl.dtsi | 4 ++-- arch/arm/boot/dts/imx6sx.dtsi | 4 ++-- arch/arm/boot/dts/imx6ul.dtsi | 4 ++-- arch/arm/boot/dts/imx7s.dtsi | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7a8837cbe21b..bc98b63922b0 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -549,7 +549,7 @@ can1: flexcan@2090000 { clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 28 0x10 17>; + fsl,stop-mode = <&gpr 0x34 28>; status = "disabled"; }; @@ -560,7 +560,7 @@ can2: flexcan@2094000 { clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 29 0x10 18>; + fsl,stop-mode = <&gpr 0x34 29>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index dfdca1804f9f..6c604c38c790 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -463,7 +463,7 @@ flexcan1: can@2090000 { clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -474,7 +474,7 @@ flexcan2: can@2094000 { clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d7d9f3e46b92..713a4bb341db 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -430,7 +430,7 @@ can1: flexcan@2090000 { clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -441,7 +441,7 @@ can2: flexcan@2094000 { clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 84d9cc13afb9..b58262acba11 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -971,7 +971,7 @@ flexcan1: can@30a00000 { clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -982,7 +982,7 @@ flexcan2: can@30a10000 { clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; base-commit: e87d24fce924bfcef9714bbaeb1514162420052e -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de> To: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-can@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Marc Kleine-Budde <mkl@pengutronix.de>, kernel@pengutronix.de, kuba@kernel.org, Shawn Guo <shawnguo@kernel.org>, davem@davemloft.net, linux-arm-kernel@lists.infradead.org Subject: [net v2 1/4] ARM: dts: imx: fix can fsl,stop-mode Date: Wed, 11 Nov 2020 14:05:04 +0100 [thread overview] Message-ID: <20201111130507.1560881-2-mkl@pengutronix.de> (raw) In-Reply-To: <20201111130507.1560881-1-mkl@pengutronix.de> Since commit: d9b081e3fc4b can: flexcan: remove ack_grp and ack_bit handling from driver the 4th and 5th value of the property "fsl,stop-mode" aren't used anymore. With the conversion of the flexcan binding to yaml this raises the following error during dtbs_check: arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: fsl,stop-mode:0: [1, 52, 28, 16, 17] is too long From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml This patch fixes the error by removing the obsolete values. Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/boot/dts/imx6qdl.dtsi | 4 ++-- arch/arm/boot/dts/imx6sx.dtsi | 4 ++-- arch/arm/boot/dts/imx6ul.dtsi | 4 ++-- arch/arm/boot/dts/imx7s.dtsi | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7a8837cbe21b..bc98b63922b0 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -549,7 +549,7 @@ can1: flexcan@2090000 { clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 28 0x10 17>; + fsl,stop-mode = <&gpr 0x34 28>; status = "disabled"; }; @@ -560,7 +560,7 @@ can2: flexcan@2094000 { clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 29 0x10 18>; + fsl,stop-mode = <&gpr 0x34 29>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index dfdca1804f9f..6c604c38c790 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -463,7 +463,7 @@ flexcan1: can@2090000 { clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -474,7 +474,7 @@ flexcan2: can@2094000 { clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d7d9f3e46b92..713a4bb341db 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -430,7 +430,7 @@ can1: flexcan@2090000 { clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -441,7 +441,7 @@ can2: flexcan@2094000 { clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 84d9cc13afb9..b58262acba11 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -971,7 +971,7 @@ flexcan1: can@30a00000 { clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -982,7 +982,7 @@ flexcan2: can@30a10000 { clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; base-commit: e87d24fce924bfcef9714bbaeb1514162420052e -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-11 13:05 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <[net v2 0/4] arm: imx: flexcan: fix yaml bindings and DTs> 2020-11-11 13:05 ` pull-request: can 2020-11-11 Marc Kleine-Budde 2020-11-11 13:05 ` Marc Kleine-Budde 2020-11-11 13:05 ` Marc Kleine-Budde [this message] 2020-11-11 13:05 ` [net v2 1/4] ARM: dts: imx: fix can fsl,stop-mode Marc Kleine-Budde 2020-11-16 8:23 ` Shawn Guo 2020-11-16 8:23 ` Shawn Guo 2020-11-11 13:05 ` [net v2 2/4] ARM: dts: imx: Change flexcan node name to "can" Marc Kleine-Budde 2020-11-11 13:05 ` Marc Kleine-Budde 2020-11-16 8:24 ` Shawn Guo 2020-11-16 8:24 ` Shawn Guo 2020-11-11 13:05 ` [net v2 3/4] dt-bindings: can: fsl,flexcan.yaml: fix compatible for i.MX35 and i.MX53 Marc Kleine-Budde 2020-11-11 13:05 ` [net v2 3/4] dt-bindings: can: fsl, flexcan.yaml: " Marc Kleine-Budde 2020-11-11 13:05 ` [net v2 4/4] dt-bindings: can: fsl,flexcan.yaml: fix fsl,stop-mode Marc Kleine-Budde 2020-11-11 13:05 ` Marc Kleine-Budde 2020-11-11 19:05 ` pull-request: can 2020-11-11 Rob Herring 2020-11-11 19:05 ` Rob Herring 2020-11-11 21:39 ` Marc Kleine-Budde 2020-11-11 21:39 ` Marc Kleine-Budde
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201111130507.1560881-2-mkl@pengutronix.de \ --to=mkl@pengutronix.de \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=kernel@pengutronix.de \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-can@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.