From: Nishanth Menon <nm@ti.com> To: Sekhar Nori <nsekhar@ti.com> Cc: Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Faiz Abbas <faiz_abbas@ti.com> Subject: Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Date: Fri, 13 Nov 2020 11:04:41 -0600 [thread overview] Message-ID: <20201113170441.2hvvqcnscpd7hos7@enigmatic> (raw) In-Reply-To: <20201113154905.40095-1-nsekhar@ti.com> On 21:19-20201113, Sekhar Nori wrote: > From: Faiz Abbas <faiz_abbas@ti.com> > > Add configs to help enable regulators that supply power to the SD card > on TI's J721e platform. These regulators are controlled by either > SoC gpios or gpios over i2c expander. > > vmlinux size before and after patch follow: > Sekhar, > Before: > text data bss dec hex filename > 19755448 10376346 535572 30667366 1d3f266 vmlinux > > After: > text data bss dec hex filename > 19769232 10381390 536212 30686834 1d43e72 vmlinux > > difference is 19,468 (dec) > > Acked-by: Tero Kristo <t-kristo@ti.com> > Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> > Signed-off-by: Sekhar Nori <nsekhar@ti.com> > --- > changes in v3: > - add size delta as requested by Nishanth Menon https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/commit/?h=ti-k3-config-next&id=6b133f475a97a0839f02e3c0b937886b9adc2933 https://lore.kernel.org/linux-arm-kernel/20201103190821.30937-1-faiz_abbas@ti.com/ Is this a duplicate patch? > > arch/arm64/configs/defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index c5f404ce2eec..e44d3f438530 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y > CONFIG_I2C_IMX_LPI2C=y > CONFIG_I2C_MESON=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_OMAP=y > CONFIG_I2C_OWL=y > CONFIG_I2C_PXA=y > CONFIG_I2C_QCOM_CCI=m > @@ -498,6 +499,7 @@ CONFIG_PINCTRL_SDM845=y > CONFIG_PINCTRL_SM8150=y > CONFIG_PINCTRL_SM8250=y > CONFIG_GPIO_ALTERA=m > +CONFIG_GPIO_DAVINCI=y > CONFIG_GPIO_DWAPB=y > CONFIG_GPIO_MB86S7X=y > CONFIG_GPIO_MPC8XXX=y > -- > 2.17.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com> To: Sekhar Nori <nsekhar@ti.com> Cc: Catalin Marinas <catalin.marinas@arm.com>, Faiz Abbas <faiz_abbas@ti.com>, Will Deacon <will@kernel.org>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Date: Fri, 13 Nov 2020 11:04:41 -0600 [thread overview] Message-ID: <20201113170441.2hvvqcnscpd7hos7@enigmatic> (raw) In-Reply-To: <20201113154905.40095-1-nsekhar@ti.com> On 21:19-20201113, Sekhar Nori wrote: > From: Faiz Abbas <faiz_abbas@ti.com> > > Add configs to help enable regulators that supply power to the SD card > on TI's J721e platform. These regulators are controlled by either > SoC gpios or gpios over i2c expander. > > vmlinux size before and after patch follow: > Sekhar, > Before: > text data bss dec hex filename > 19755448 10376346 535572 30667366 1d3f266 vmlinux > > After: > text data bss dec hex filename > 19769232 10381390 536212 30686834 1d43e72 vmlinux > > difference is 19,468 (dec) > > Acked-by: Tero Kristo <t-kristo@ti.com> > Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> > Signed-off-by: Sekhar Nori <nsekhar@ti.com> > --- > changes in v3: > - add size delta as requested by Nishanth Menon https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/commit/?h=ti-k3-config-next&id=6b133f475a97a0839f02e3c0b937886b9adc2933 https://lore.kernel.org/linux-arm-kernel/20201103190821.30937-1-faiz_abbas@ti.com/ Is this a duplicate patch? > > arch/arm64/configs/defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index c5f404ce2eec..e44d3f438530 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y > CONFIG_I2C_IMX_LPI2C=y > CONFIG_I2C_MESON=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_OMAP=y > CONFIG_I2C_OWL=y > CONFIG_I2C_PXA=y > CONFIG_I2C_QCOM_CCI=m > @@ -498,6 +499,7 @@ CONFIG_PINCTRL_SDM845=y > CONFIG_PINCTRL_SM8150=y > CONFIG_PINCTRL_SM8250=y > CONFIG_GPIO_ALTERA=m > +CONFIG_GPIO_DAVINCI=y > CONFIG_GPIO_DWAPB=y > CONFIG_GPIO_MB86S7X=y > CONFIG_GPIO_MPC8XXX=y > -- > 2.17.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-13 17:04 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-13 15:49 [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Sekhar Nori 2020-11-13 15:49 ` Sekhar Nori 2020-11-13 17:04 ` Nishanth Menon [this message] 2020-11-13 17:04 ` Nishanth Menon 2020-11-13 17:15 ` Sekhar Nori 2020-11-13 17:15 ` Sekhar Nori 2020-11-13 18:33 ` Nishanth Menon 2020-11-13 18:33 ` Nishanth Menon -- strict thread matches above, loose matches on Subject: below -- 2020-11-03 19:08 Faiz Abbas 2020-11-03 19:08 ` Faiz Abbas 2020-11-12 17:51 ` Nishanth Menon 2020-11-12 17:51 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201113170441.2hvvqcnscpd7hos7@enigmatic \ --to=nm@ti.com \ --cc=catalin.marinas@arm.com \ --cc=faiz_abbas@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.