From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: Collabora Kernel ML <kernel@collabora.com>,
Jitao Shi <jitao.shi@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: mt8183: Add dsi node
Date: Fri, 27 Nov 2020 11:49:28 +0100 [thread overview]
Message-ID: <20201127104930.1981497-2-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
From: Jitao Shi <jitao.shi@mediatek.com>
Add dsi and mipitx nodes to the MT8183.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 31 ++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7839480df075..da7212e21fdf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -892,10 +892,27 @@ mmc1: mmc@11240000 {
status = "disabled";
};
+ mipi_tx0: mipi-dphy@11e50000 {
+ compatible = "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11e50000 0 0x1000>;
+ clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ nvmem-cells = <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
efuse: efuse@11f10000 {
compatible = "mediatek,mt8183-efuse",
"mediatek,efuse";
reg = <0 0x11f10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mipi_tx_calibration: calib@190 {
+ reg = <0x190 0xc>;
+ };
};
u3phy: usb-phy@11f40000 {
@@ -937,6 +954,20 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ mediatek,syscon-dsi = <&mmsys 0x140>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ };
+
smi_common: smi@14019000 {
compatible = "mediatek,mt8183-smi-common", "syscon";
reg = <0 0x14019000 0 0x1000>;
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, Jitao Shi <jitao.shi@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: mt8183: Add dsi node
Date: Fri, 27 Nov 2020 11:49:28 +0100 [thread overview]
Message-ID: <20201127104930.1981497-2-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
From: Jitao Shi <jitao.shi@mediatek.com>
Add dsi and mipitx nodes to the MT8183.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 31 ++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7839480df075..da7212e21fdf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -892,10 +892,27 @@ mmc1: mmc@11240000 {
status = "disabled";
};
+ mipi_tx0: mipi-dphy@11e50000 {
+ compatible = "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11e50000 0 0x1000>;
+ clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ nvmem-cells = <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
efuse: efuse@11f10000 {
compatible = "mediatek,mt8183-efuse",
"mediatek,efuse";
reg = <0 0x11f10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mipi_tx_calibration: calib@190 {
+ reg = <0x190 0xc>;
+ };
};
u3phy: usb-phy@11f40000 {
@@ -937,6 +954,20 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ mediatek,syscon-dsi = <&mmsys 0x140>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ };
+
smi_common: smi@14019000 {
compatible = "mediatek,mt8183-smi-common", "syscon";
reg = <0 0x14019000 0 0x1000>;
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, Jitao Shi <jitao.shi@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: mt8183: Add dsi node
Date: Fri, 27 Nov 2020 11:49:28 +0100 [thread overview]
Message-ID: <20201127104930.1981497-2-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
From: Jitao Shi <jitao.shi@mediatek.com>
Add dsi and mipitx nodes to the MT8183.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 31 ++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7839480df075..da7212e21fdf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -892,10 +892,27 @@ mmc1: mmc@11240000 {
status = "disabled";
};
+ mipi_tx0: mipi-dphy@11e50000 {
+ compatible = "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11e50000 0 0x1000>;
+ clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ nvmem-cells = <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
efuse: efuse@11f10000 {
compatible = "mediatek,mt8183-efuse",
"mediatek,efuse";
reg = <0 0x11f10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mipi_tx_calibration: calib@190 {
+ reg = <0x190 0xc>;
+ };
};
u3phy: usb-phy@11f40000 {
@@ -937,6 +954,20 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ mediatek,syscon-dsi = <&mmsys 0x140>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ };
+
smi_common: smi@14019000 {
compatible = "mediatek,mt8183-smi-common", "syscon";
reg = <0 0x14019000 0 0x1000>;
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-27 10:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 10:49 [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra [this message]
2020-11-27 10:49 ` [PATCH 1/3] arm64: dts: mt8183: Add dsi node Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 2/3] arm64: dts: mt8183: Add iommu and larb nodes Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183 Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-12-10 7:01 ` CK Hu
2020-12-10 7:01 ` CK Hu
2020-12-10 7:01 ` CK Hu
2020-11-27 11:23 ` [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Matthias Brugger
2020-11-27 11:23 ` Matthias Brugger
2020-11-27 11:23 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201127104930.1981497-2-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=jitao.shi@mediatek.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.