From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: mchehab@kernel.org
Subject: [PATCH 18/38] ccs-pll: Add support for decoupled OP domain calculation
Date: Wed, 2 Dec 2020 20:06:21 +0200 [thread overview]
Message-ID: <20201202180641.17401-19-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20201202180641.17401-1-sakari.ailus@linux.intel.com>
Add support for decoupled OP domain clock calculation. This means that the
number of VT and OP domain clocks are no longer dependent on the number of
CSI-2 lanes in the lane speed mode.
The support also replaces the existing quirk flag to calculate OP domain
clocks per lane.
Also support decoupled OP domain calculation in the CCS driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ccs-pll.c | 22 +++++++---------------
drivers/media/i2c/ccs-pll.h | 1 +
drivers/media/i2c/ccs/ccs-core.c | 14 +++++++++++---
drivers/media/i2c/ccs/ccs-quirk.c | 5 ++++-
4 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c
index 9750b49d834a..cb19a36e54df 100644
--- a/drivers/media/i2c/ccs-pll.c
+++ b/drivers/media/i2c/ccs-pll.c
@@ -162,7 +162,7 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
const struct ccs_pll_branch_limits_bk *op_lim_bk,
struct ccs_pll *pll, struct ccs_pll_branch_fr *op_pll_fr,
struct ccs_pll_branch_bk *op_pll_bk, uint32_t mul,
- uint32_t div, uint32_t lane_op_clock_ratio)
+ uint32_t div)
{
uint32_t sys_div;
uint32_t best_pix_div = INT_MAX >> 1;
@@ -194,7 +194,8 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
min_t(uint32_t,
more_mul_max,
op_lim_fr->max_pll_op_clk_freq_hz
- / (pll->ext_clk_freq_hz / op_pll_fr->pre_pll_clk_div * mul));
+ / (pll->ext_clk_freq_hz /
+ op_pll_fr->pre_pll_clk_div * mul));
dev_dbg(dev, "more_mul_max: max_pll_op_clk_freq_hz check: %u\n",
more_mul_max);
/* Don't go above the division capability of op sys clock divider. */
@@ -257,7 +258,6 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
op_pll_bk->sys_clk_freq_hz / op_pll_bk->pix_clk_div;
dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div);
-
if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) {
/* No OP clocks --- VT clocks are used instead. */
goto out_skip_vt_calc;
@@ -293,7 +293,7 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
* op_pll_bk->sys_clk_div * pll->scale_n
* pll->vt_lanes,
pll->op_lanes * vt_op_binning_div
- * pll->scale_m * lane_op_clock_ratio);
+ * pll->scale_m);
/* Find smallest and biggest allowed vt divisor. */
dev_dbg(dev, "min_vt_div: %u\n", min_vt_div);
@@ -405,7 +405,6 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
struct ccs_pll_branch_bk *op_pll_bk = &pll->op_bk;
uint16_t min_op_pre_pll_clk_div;
uint16_t max_op_pre_pll_clk_div;
- uint32_t lane_op_clock_ratio;
uint32_t mul, div;
uint32_t i;
int rval = -EINVAL;
@@ -428,12 +427,6 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
op_pll_bk = &pll->vt_bk;
}
- if (pll->flags & CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
- lane_op_clock_ratio = pll->csi2.lanes;
- else
- lane_op_clock_ratio = 1;
- dev_dbg(dev, "lane_op_clock_ratio: %u\n", lane_op_clock_ratio);
-
dev_dbg(dev, "binning: %ux%u\n", pll->binning_horizontal,
pll->binning_vertical);
@@ -442,7 +435,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
/* CSI transfers 2 bits per clock per lane; thus times 2 */
op_pll_bk->sys_clk_freq_hz = pll->link_freq * 2
* (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ?
- 1 : pll->csi2.lanes) / lane_op_clock_ratio;
+ 1 : pll->csi2.lanes);
break;
default:
return -EINVAL;
@@ -451,7 +444,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
pll->pixel_rate_csi =
op_pll_bk->pix_clk_freq_hz
* (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ?
- pll->csi2.lanes : 1) * lane_op_clock_ratio;
+ pll->csi2.lanes : 1);
/* Figure out limits for OP pre-pll divider based on extclk */
dev_dbg(dev, "min / max op_pre_pll_clk_div: %u / %u\n",
@@ -487,8 +480,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
op_pll_fr->pre_pll_clk_div <= max_op_pre_pll_clk_div;
op_pll_fr->pre_pll_clk_div += 2 - (op_pll_fr->pre_pll_clk_div & 1)) {
rval = __ccs_pll_calculate(dev, lim, op_lim_fr, op_lim_bk, pll,
- op_pll_fr, op_pll_bk, mul, div,
- lane_op_clock_ratio);
+ op_pll_fr, op_pll_bk, mul, div);
if (rval)
continue;
diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h
index fe8eb3d4bcff..fe20af11a068 100644
--- a/drivers/media/i2c/ccs-pll.h
+++ b/drivers/media/i2c/ccs-pll.h
@@ -24,6 +24,7 @@
#define CCS_PLL_FLAG_NO_OP_CLOCKS BIT(1)
/* CCS PLL flags */
#define CCS_PLL_FLAG_LANE_SPEED_MODEL BIT(2)
+#define CCS_PLL_FLAG_LINK_DECOUPLED BIT(3)
/**
* struct ccs_pll_branch_fr - CCS PLL configuration (front)
diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index f3d4209c818c..41c006ad03c4 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -3207,10 +3207,18 @@ static int ccs_probe(struct i2c_client *client)
sensor->pll.csi2.lanes = sensor->hwcfg.lanes;
if (CCS_LIM(sensor, CLOCK_CALCULATION) &
CCS_CLOCK_CALCULATION_LANE_SPEED) {
- sensor->pll.vt_lanes =
- CCS_LIM(sensor, NUM_OF_VT_LANES) + 1;
- sensor->pll.op_lanes = sensor->pll.vt_lanes;
sensor->pll.flags |= CCS_PLL_FLAG_LANE_SPEED_MODEL;
+ if (CCS_LIM(sensor, CLOCK_CALCULATION) &
+ CCS_CLOCK_CALCULATION_LINK_DECOUPLED) {
+ sensor->pll.vt_lanes =
+ CCS_LIM(sensor, NUM_OF_VT_LANES) + 1;
+ sensor->pll.op_lanes =
+ CCS_LIM(sensor, NUM_OF_OP_LANES) + 1;
+ sensor->pll.flags |= CCS_PLL_FLAG_LINK_DECOUPLED;
+ } else {
+ sensor->pll.vt_lanes = sensor->pll.csi2.lanes;
+ sensor->pll.op_lanes = sensor->pll.csi2.lanes;
+ }
}
sensor->pll.ext_clk_freq_hz = sensor->hwcfg.ext_clk;
sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN);
diff --git a/drivers/media/i2c/ccs/ccs-quirk.c b/drivers/media/i2c/ccs/ccs-quirk.c
index 4fe8c6f70579..e3d4c7a275bc 100644
--- a/drivers/media/i2c/ccs/ccs-quirk.c
+++ b/drivers/media/i2c/ccs/ccs-quirk.c
@@ -190,7 +190,10 @@ static int jt8ev1_post_streamoff(struct ccs_sensor *sensor)
static int jt8ev1_init(struct ccs_sensor *sensor)
{
- sensor->pll.flags |= CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+ sensor->pll.flags |= CCS_PLL_FLAG_LANE_SPEED_MODEL |
+ CCS_PLL_FLAG_LINK_DECOUPLED;
+ sensor->pll.vt_lanes = 1;
+ sensor->pll.op_lanes = sensor->pll.csi2.lanes;
return 0;
}
--
2.27.0
next prev parent reply other threads:[~2020-12-02 18:13 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 18:06 [PATCH 00/38] Support additional CCS PLL features, C-PHY Sakari Ailus
2020-12-02 18:06 ` [PATCH 01/38] ccs-pll: Don't use div_u64 to divide a 32-bit number Sakari Ailus
2020-12-02 18:06 ` [PATCH 02/38] ccs-pll: Split limits and PLL configuration into front and back parts Sakari Ailus
2020-12-02 18:06 ` [PATCH 03/38] ccs-pll: Use correct VT divisor for calculating VT SYS divisor Sakari Ailus
2020-12-02 18:06 ` [PATCH 04/38] ccs-pll: End search if there are no better values available Sakari Ailus
2020-12-02 18:06 ` [PATCH 05/38] ccs-pll: Remove parallel bus support Sakari Ailus
2020-12-02 18:06 ` [PATCH 06/38] ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY Sakari Ailus
2020-12-02 18:06 ` [PATCH 07/38] ccs-pll: Move the flags field down, away from 8-bit fields Sakari Ailus
2020-12-02 18:06 ` [PATCH 08/38] ccs-pll: Document the structs in the header as well as the function Sakari Ailus
2020-12-02 18:06 ` [PATCH 09/38] ccs-pll: Use the BIT macro Sakari Ailus
2020-12-02 18:06 ` [PATCH 10/38] ccs-pll: Begin calculation from OP system clock frequency Sakari Ailus
2020-12-02 18:06 ` [PATCH 11/38] ccs-pll: Fix condition for pre-PLL divider lower bound Sakari Ailus
2020-12-02 18:06 ` [PATCH 12/38] ccs-pll: Avoid overflow in pre-PLL divisor lower bound search Sakari Ailus
2020-12-02 18:06 ` [PATCH 13/38] ccs-pll: Fix comment on check against maximum PLL multiplier Sakari Ailus
2020-12-02 18:06 ` [PATCH 14/38] ccs-pll: Fix check for PLL multiplier upper bound Sakari Ailus
2020-12-02 18:06 ` [PATCH 15/38] ccs-pll: Use explicit 32-bit unsigned type Sakari Ailus
2020-12-02 18:06 ` [PATCH 16/38] ccs-pll: Add support for lane speed model Sakari Ailus
2020-12-02 18:06 ` [PATCH 17/38] ccs: " Sakari Ailus
2020-12-02 18:06 ` Sakari Ailus [this message]
2020-12-02 18:06 ` [PATCH 19/38] ccs-pll: Add support for extended input PLL clock divider Sakari Ailus
2020-12-02 18:06 ` [PATCH 20/38] ccs-pll: Support two cycles per pixel on OP domain Sakari Ailus
2020-12-02 18:06 ` [PATCH 21/38] ccs-pll: Add support flexible OP PLL pixel clock divider Sakari Ailus
2020-12-02 18:06 ` [PATCH 22/38] ccs-pll: Add sanity checks Sakari Ailus
2020-12-02 18:06 ` [PATCH 23/38] ccs-pll: Add C-PHY support Sakari Ailus
2020-12-02 18:06 ` [PATCH 24/38] ccs-pll: Split off VT subtree calculation Sakari Ailus
2020-12-02 18:06 ` [PATCH 25/38] ccs-pll: Check for derating and overrating, support non-derating sensors Sakari Ailus
2020-12-02 18:06 ` [PATCH 26/38] ccs-pll: Better separate OP and VT sub-tree calculation Sakari Ailus
2020-12-02 18:06 ` [PATCH 27/38] ccs-pll: Print relevant information on PLL tree Sakari Ailus
2020-12-02 18:06 ` [PATCH 28/38] ccs-pll: Rework bounds checks Sakari Ailus
2020-12-02 18:06 ` [PATCH 29/38] ccs-pll: Make VT divisors 16-bit Sakari Ailus
2020-12-02 18:06 ` [PATCH 30/38] ccs-pll: Fix VT post-PLL divisor calculation Sakari Ailus
2020-12-02 18:06 ` [PATCH 31/38] ccs-pll: Separate VT divisor limit calculation from the rest Sakari Ailus
2020-12-02 18:06 ` [PATCH 32/38] ccs-pll: Add trivial dual PLL support Sakari Ailus
2020-12-02 18:06 ` [PATCH 33/38] ccs: Dual " Sakari Ailus
2020-12-02 18:06 ` [PATCH 34/38] ccs-pll: Add support for DDR OP system and pixel clocks Sakari Ailus
2020-12-02 18:06 ` [PATCH 35/38] ccs: Add support for DDR OP SYS and OP PIX clocks Sakari Ailus
2020-12-02 18:06 ` [PATCH 36/38] ccs: Print written register values Sakari Ailus
2020-12-02 18:06 ` [PATCH 37/38] ccs-pll: Print pixel rates Sakari Ailus
2020-12-02 18:06 ` [PATCH 38/38] ccs: Add support for obtaining C-PHY configuration from firmware Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202180641.17401-19-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.