All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Tom Joseph <tjoseph@cadence.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [RESEND PATCH 4/4] PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
Date: Thu, 10 Dec 2020 18:19:17 +0530	[thread overview]
Message-ID: <20201210124917.24185-5-kishon@ti.com> (raw)
In-Reply-To: <20201210124917.24185-1-kishon@ti.com>

Get "syscon" pcie_ctrl offset from the argument of "ti,syscon-pcie-ctrl"
phandle. Previously a subnode to "syscon" node was added which has the
exact memory mapped address of pcie_ctrl but now the offset of pcie_ctrl
within "syscon" is now being passed as argument to "ti,syscon-pcie-ctrl"
phandle.

If the offset is not provided in "ti,syscon-pcie-ctrl", the
full memory mapped address of pcie_ctrl is used in order to maintain old
DT compatibility.

This change is as discussed in [1]

[1] -> http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 28 +++++++++++++++-------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 586b9d69fa5e..dac1ac8a7615 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -12,6 +12,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/mfd/syscon.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pci.h>
@@ -153,7 +154,8 @@ static const struct cdns_pcie_ops j721e_pcie_ops = {
 	.link_up = j721e_pcie_link_up,
 };
 
-static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
+static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon,
+			       unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 mask = J721E_MODE_RC;
@@ -164,7 +166,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 	if (mode == PCI_MODE_RC)
 		val = J721E_MODE_RC;
 
-	ret = regmap_update_bits(syscon, 0, mask, val);
+	ret = regmap_update_bits(syscon, offset, mask, val);
 	if (ret)
 		dev_err(dev, "failed to set pcie mode\n");
 
@@ -172,7 +174,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 }
 
 static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *np = dev->of_node;
@@ -185,7 +187,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 		link_speed = 2;
 
 	val = link_speed - 1;
-	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
+	ret = regmap_update_bits(syscon, offset, GENERATION_SEL_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link speed\n");
 
@@ -193,7 +195,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 }
 
 static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 lanes = pcie->num_lanes;
@@ -201,7 +203,7 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 	int ret;
 
 	val = LANE_COUNT(lanes - 1);
-	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
+	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link count\n");
 
@@ -212,6 +214,8 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *node = dev->of_node;
+	struct of_phandle_args args;
+	unsigned int offset = 0;
 	struct regmap *syscon;
 	int ret;
 
@@ -221,19 +225,25 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 		return PTR_ERR(syscon);
 	}
 
-	ret = j721e_pcie_set_mode(pcie, syscon);
+	/* Do not error out to maintain old DT compatibility */
+	ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-pcie-ctrl", 1,
+					       0, &args);
+	if (!ret)
+		offset = args.args[0];
+
+	ret = j721e_pcie_set_mode(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set pci mode\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_link_speed(pcie, syscon);
+	ret = j721e_pcie_set_link_speed(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set link speed\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_lane_count(pcie, syscon);
+	ret = j721e_pcie_set_lane_count(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set num-lanes\n");
 		return ret;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Tom Joseph <tjoseph@cadence.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-pci@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [RESEND PATCH 4/4] PCI: j721e: Get offset within "syscon" from "ti, syscon-pcie-ctrl" phandle arg
Date: Thu, 10 Dec 2020 18:19:17 +0530	[thread overview]
Message-ID: <20201210124917.24185-5-kishon@ti.com> (raw)
In-Reply-To: <20201210124917.24185-1-kishon@ti.com>

Get "syscon" pcie_ctrl offset from the argument of "ti,syscon-pcie-ctrl"
phandle. Previously a subnode to "syscon" node was added which has the
exact memory mapped address of pcie_ctrl but now the offset of pcie_ctrl
within "syscon" is now being passed as argument to "ti,syscon-pcie-ctrl"
phandle.

If the offset is not provided in "ti,syscon-pcie-ctrl", the
full memory mapped address of pcie_ctrl is used in order to maintain old
DT compatibility.

This change is as discussed in [1]

[1] -> http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 28 +++++++++++++++-------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 586b9d69fa5e..dac1ac8a7615 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -12,6 +12,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/mfd/syscon.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pci.h>
@@ -153,7 +154,8 @@ static const struct cdns_pcie_ops j721e_pcie_ops = {
 	.link_up = j721e_pcie_link_up,
 };
 
-static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
+static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon,
+			       unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 mask = J721E_MODE_RC;
@@ -164,7 +166,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 	if (mode == PCI_MODE_RC)
 		val = J721E_MODE_RC;
 
-	ret = regmap_update_bits(syscon, 0, mask, val);
+	ret = regmap_update_bits(syscon, offset, mask, val);
 	if (ret)
 		dev_err(dev, "failed to set pcie mode\n");
 
@@ -172,7 +174,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 }
 
 static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *np = dev->of_node;
@@ -185,7 +187,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 		link_speed = 2;
 
 	val = link_speed - 1;
-	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
+	ret = regmap_update_bits(syscon, offset, GENERATION_SEL_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link speed\n");
 
@@ -193,7 +195,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 }
 
 static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 lanes = pcie->num_lanes;
@@ -201,7 +203,7 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 	int ret;
 
 	val = LANE_COUNT(lanes - 1);
-	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
+	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link count\n");
 
@@ -212,6 +214,8 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *node = dev->of_node;
+	struct of_phandle_args args;
+	unsigned int offset = 0;
 	struct regmap *syscon;
 	int ret;
 
@@ -221,19 +225,25 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 		return PTR_ERR(syscon);
 	}
 
-	ret = j721e_pcie_set_mode(pcie, syscon);
+	/* Do not error out to maintain old DT compatibility */
+	ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-pcie-ctrl", 1,
+					       0, &args);
+	if (!ret)
+		offset = args.args[0];
+
+	ret = j721e_pcie_set_mode(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set pci mode\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_link_speed(pcie, syscon);
+	ret = j721e_pcie_set_link_speed(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set link speed\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_lane_count(pcie, syscon);
+	ret = j721e_pcie_set_lane_count(pcie, syscon, offset);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set num-lanes\n");
 		return ret;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-12-10 12:51 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10 12:49 [RESEND PATCH 0/4] PCI: J7: J7200/J721E PCIe bindings Kishon Vijay Abraham I
2020-12-10 12:49 ` Kishon Vijay Abraham I
2020-12-10 12:49 ` [RESEND PATCH 1/4] dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument Kishon Vijay Abraham I
2020-12-10 12:49   ` [RESEND PATCH 1/4] dt-bindings: pci: ti, j721e: Fix "ti, syscon-pcie-ctrl" " Kishon Vijay Abraham I
2020-12-10 12:49 ` [RESEND PATCH 2/4] dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC Kishon Vijay Abraham I
2020-12-10 12:49   ` Kishon Vijay Abraham I
2020-12-10 12:49 ` [RESEND PATCH 3/4] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-12-10 12:49   ` Kishon Vijay Abraham I
2020-12-10 12:49 ` Kishon Vijay Abraham I [this message]
2020-12-10 12:49   ` [RESEND PATCH 4/4] PCI: j721e: Get offset within "syscon" from "ti, syscon-pcie-ctrl" phandle arg Kishon Vijay Abraham I
2020-12-10 14:39 ` [RESEND PATCH 0/4] PCI: J7: J7200/J721E PCIe bindings Lorenzo Pieralisi
2020-12-10 14:39   ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210124917.24185-5-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.