[PATCH v4 0/4] Add support for Qcom SMEM based NAND parser

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
	robh+dt@kernel.org
Cc: bjorn.andersson@linaro.org, linux-mtd@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v4 0/4] Add support for Qcom SMEM based NAND parser
Date: Mon,  4 Jan 2021 09:41:33 +0530	[thread overview]
Message-ID: <20210104041137.113075-1-manivannan.sadhasivam@linaro.org> (raw)

Hello,

This series adds support for parsing the partitions defined in Shared
Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
Current parser only supports V3 and V4 of the partition tables.

This series has been tested on SDX55 MTP board which has an onboard NAND
device.

Thanks,
Mani

Changes in v4:

* Added Rob's review for binding

Changes in v3:

* Handled le32 parameters in parser, collected review from Linus W.

Changes in v2:

* Added additionalProperties: false and removed unit address in binding

Manivannan Sadhasivam (4):
  dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
  mtd: parsers: Add Qcom SMEM parser
  mtd: rawnand: qcom: Add support for Qcom SMEM parser
  mtd: parsers: afs: Fix freeing the part name memory in failure

 .../mtd/partitions/qcom,smem-part.yaml        |  33 ++++
 drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
 drivers/mtd/parsers/Kconfig                   |   8 +
 drivers/mtd/parsers/Makefile                  |   1 +
 drivers/mtd/parsers/afs.c                     |   4 +-
 drivers/mtd/parsers/qcomsmempart.c            | 170 ++++++++++++++++++
 6 files changed, 216 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
 create mode 100644 drivers/mtd/parsers/qcomsmempart.c

-- 
2.25.1