From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: Ulrich Hecht <uli+renesas@fpond.eu>, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 0/2] arm64: dts: renesas: r8a779a0: Add GPIO support Date: Fri, 8 Jan 2021 11:28:52 +0100 [thread overview] Message-ID: <20210108102854.2025261-1-geert+renesas@glider.be> (raw) Hi all, This patch series enables GPIO in the R-Car V3U DTS file. It includes an RFC patch to add a Pin Controller device node, as the PFC node is a dependency for proper GPIO support. It would be good to resolve the PFC issue soon, as PFC and GPIO are dependencies for most hardware support on the Falcon board. Changes compared to v1: - Include RFC patch to add PFC node, - Add Tested-by, - Fix "V3u" typo in patch description, - Uncomment "gpio-ranges" properties, - Verified resets values. Thanks! Geert Uytterhoeven (2): [RFC] arm64: dts: renesas: r8a779a0: Add PFC node arm64: dts: renesas: r8a779a0: Add GPIO nodes arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 149 ++++++++++++++++++++++ 1 file changed, 149 insertions(+) -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, Ulrich Hecht <uli+renesas@fpond.eu>, Geert Uytterhoeven <geert+renesas@glider.be>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/2] arm64: dts: renesas: r8a779a0: Add GPIO support Date: Fri, 8 Jan 2021 11:28:52 +0100 [thread overview] Message-ID: <20210108102854.2025261-1-geert+renesas@glider.be> (raw) Hi all, This patch series enables GPIO in the R-Car V3U DTS file. It includes an RFC patch to add a Pin Controller device node, as the PFC node is a dependency for proper GPIO support. It would be good to resolve the PFC issue soon, as PFC and GPIO are dependencies for most hardware support on the Falcon board. Changes compared to v1: - Include RFC patch to add PFC node, - Add Tested-by, - Fix "V3u" typo in patch description, - Uncomment "gpio-ranges" properties, - Verified resets values. Thanks! Geert Uytterhoeven (2): [RFC] arm64: dts: renesas: r8a779a0: Add PFC node arm64: dts: renesas: r8a779a0: Add GPIO nodes arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 149 ++++++++++++++++++++++ 1 file changed, 149 insertions(+) -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-08 10:29 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-08 10:28 Geert Uytterhoeven [this message] 2021-01-08 10:28 ` [PATCH v2 0/2] arm64: dts: renesas: r8a779a0: Add GPIO support Geert Uytterhoeven 2021-01-08 10:28 ` [PATCH/RFC v2 1/2] arm64: dts: renesas: r8a779a0: Add PFC node Geert Uytterhoeven 2021-01-08 10:28 ` Geert Uytterhoeven 2021-01-08 10:28 ` [PATCH v2 2/2] arm64: dts: renesas: r8a779a0: Add GPIO nodes Geert Uytterhoeven 2021-01-08 10:28 ` Geert Uytterhoeven 2021-01-08 10:30 ` Wolfram Sang 2021-01-08 10:30 ` Wolfram Sang 2021-01-08 10:40 ` Geert Uytterhoeven 2021-01-08 10:40 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210108102854.2025261-1-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=uli+renesas@fpond.eu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.