From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de>, Peter Meerwald-Stadler <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH v2 0/6] iio:pressure:ms5637: add ms5803 support Date: Sun, 10 Jan 2021 00:11:42 +0100 [thread overview] Message-ID: <20210109231148.1168104-1-alexandre.belloni@bootlin.com> (raw) Hello, This series adds support for the Measurement Specialities ms5803. It is very similar to the ms5805 but has a different PROM layout (which I suspect predates the ms5805 PROM layout). Also it supports less frequency sampling options. After a bit of preparatory work in the ms5637 driver and its common library, mainly to handle the PROM layout and sample frequencies, adding support is trivial. Changes in v2: - Dropped "iio:pressure:ms5637: switch to probe_new" to keep the i2c_device_id table. - Reorder trivial-devices.yaml Alexandre Belloni (6): dt-bindings: trivial-devices: reorder memsic devices iio:pressure:ms5637: introduce hardware differentiation iio:pressure:ms5637: limit available sample frequencies iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout iio:pressure:ms5637: add ms5803 support .../devicetree/bindings/trivial-devices.yaml | 10 ++- .../iio/common/ms_sensors/ms_sensors_i2c.c | 76 ++++++++++++++---- .../iio/common/ms_sensors/ms_sensors_i2c.h | 15 +++- drivers/iio/pressure/ms5637.c | 77 +++++++++++++++---- 4 files changed, 143 insertions(+), 35 deletions(-) -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Jonathan Cameron <jic23@kernel.org> Cc: devicetree@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com>, Lars-Peter Clausen <lars@metafoo.de>, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, Peter Meerwald-Stadler <pmeerw@pmeerw.net>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/6] iio:pressure:ms5637: add ms5803 support Date: Sun, 10 Jan 2021 00:11:42 +0100 [thread overview] Message-ID: <20210109231148.1168104-1-alexandre.belloni@bootlin.com> (raw) Hello, This series adds support for the Measurement Specialities ms5803. It is very similar to the ms5805 but has a different PROM layout (which I suspect predates the ms5805 PROM layout). Also it supports less frequency sampling options. After a bit of preparatory work in the ms5637 driver and its common library, mainly to handle the PROM layout and sample frequencies, adding support is trivial. Changes in v2: - Dropped "iio:pressure:ms5637: switch to probe_new" to keep the i2c_device_id table. - Reorder trivial-devices.yaml Alexandre Belloni (6): dt-bindings: trivial-devices: reorder memsic devices iio:pressure:ms5637: introduce hardware differentiation iio:pressure:ms5637: limit available sample frequencies iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout iio:pressure:ms5637: add ms5803 support .../devicetree/bindings/trivial-devices.yaml | 10 ++- .../iio/common/ms_sensors/ms_sensors_i2c.c | 76 ++++++++++++++---- .../iio/common/ms_sensors/ms_sensors_i2c.h | 15 +++- drivers/iio/pressure/ms5637.c | 77 +++++++++++++++---- 4 files changed, 143 insertions(+), 35 deletions(-) -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-09 23:13 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-09 23:11 Alexandre Belloni [this message] 2021-01-09 23:11 ` [PATCH v2 0/6] iio:pressure:ms5637: add ms5803 support Alexandre Belloni 2021-01-09 23:11 ` [PATCH v2 1/6] dt-bindings: trivial-devices: reorder memsic devices Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-14 19:08 ` Rob Herring 2021-01-14 19:08 ` Rob Herring 2021-01-09 23:11 ` [PATCH v2 2/6] iio:pressure:ms5637: introduce hardware differentiation Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-09 23:11 ` [PATCH v2 3/6] iio:pressure:ms5637: limit available sample frequencies Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-09 23:11 ` [PATCH v2 4/6] iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-09 23:11 ` [PATCH v2 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-09 23:11 ` [PATCH v2 6/6] iio:pressure:ms5637: add ms5803 support Alexandre Belloni 2021-01-09 23:11 ` Alexandre Belloni 2021-01-14 19:09 ` Rob Herring 2021-01-14 19:09 ` Rob Herring 2021-01-16 18:06 ` [PATCH v2 0/6] " Jonathan Cameron 2021-01-16 18:06 ` Jonathan Cameron
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210109231148.1168104-1-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=jic23@kernel.org \ --cc=lars@metafoo.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=pmeerw@pmeerw.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.