All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Gerlach <d-gerlach@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Tony Lindgren <tony@atomide.com>,
	Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Kishon Vijay Abraham <kishon@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH v3 0/5] arm64: Initial support for Texas Instruments AM642 Platform
Date: Wed, 20 Jan 2021 14:25:27 -0600	[thread overview]
Message-ID: <20210120202532.9011-1-d-gerlach@ti.com> (raw)

This is v3 of the series to add initial support for the latest new SoC,
AM642, from Texas Instruments. Additional detail can be found in the
patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2

This version contains a few minor fixes from v2:

* Use the appropriate 'arm,cortex-a53-pmu' instead of 'arm,armv8-pmuv3'
  for ARM pmu node based on Sudeep's comment from v2.
* Fix a typo in the 'dmas' property on main_spi0
* Drop main_spi0 from board dts as a more appropriate
  compatible to use for the eeprom will be available after [1] is merged.
* Add 'gpio-line-names' under main_i2c1.


v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/
v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/

Regards,
Dave

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=478815

Dave Gerlach (4):
  dt-bindings: arm: ti: Add bindings for AM642 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
  arm64: dts: ti: Add support for AM642 SoC
  arm64: dts: ti: Add support for AM642 EVM

Peter Ujfalusi (1):
  arm64: dts: ti: k3-am64-main: Enable DMA support

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 246 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
 include/dt-bindings/pinctrl/k3.h              |   5 +-
 8 files changed, 908 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi

-- 
2.28.0


WARNING: multiple messages have this Message-ID (diff)
From: Dave Gerlach <d-gerlach@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>, Tony Lindgren <tony@atomide.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Kishon Vijay Abraham <kishon@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Aswath Govindraju <a-govindraju@ti.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] arm64: Initial support for Texas Instruments AM642 Platform
Date: Wed, 20 Jan 2021 14:25:27 -0600	[thread overview]
Message-ID: <20210120202532.9011-1-d-gerlach@ti.com> (raw)

This is v3 of the series to add initial support for the latest new SoC,
AM642, from Texas Instruments. Additional detail can be found in the
patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2

This version contains a few minor fixes from v2:

* Use the appropriate 'arm,cortex-a53-pmu' instead of 'arm,armv8-pmuv3'
  for ARM pmu node based on Sudeep's comment from v2.
* Fix a typo in the 'dmas' property on main_spi0
* Drop main_spi0 from board dts as a more appropriate
  compatible to use for the eeprom will be available after [1] is merged.
* Add 'gpio-line-names' under main_i2c1.


v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/
v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/

Regards,
Dave

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=478815

Dave Gerlach (4):
  dt-bindings: arm: ti: Add bindings for AM642 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
  arm64: dts: ti: Add support for AM642 SoC
  arm64: dts: ti: Add support for AM642 EVM

Peter Ujfalusi (1):
  arm64: dts: ti: k3-am64-main: Enable DMA support

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 246 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
 include/dt-bindings/pinctrl/k3.h              |   5 +-
 8 files changed, 908 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi

-- 
2.28.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-01-20 20:49 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20 20:25 Dave Gerlach [this message]
2021-01-20 20:25 ` [PATCH v3 0/5] arm64: Initial support for Texas Instruments AM642 Platform Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 1/5] dt-bindings: arm: ti: Add bindings for AM642 SoC Dave Gerlach
2021-01-20 20:25   ` Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Dave Gerlach
2021-01-20 20:25   ` Dave Gerlach
2021-01-20 20:50   ` Suman Anna
2021-01-20 20:50     ` Suman Anna
2021-01-25 14:39   ` Nishanth Menon
2021-01-25 14:39     ` Nishanth Menon
2021-02-09  2:34   ` Rob Herring
2021-02-09  2:34     ` Rob Herring
2021-01-20 20:25 ` [PATCH v3 3/5] arm64: dts: ti: Add support for AM642 SoC Dave Gerlach
2021-01-20 20:25   ` Dave Gerlach
2021-01-20 22:04   ` Nishanth Menon
2021-01-20 22:04     ` Nishanth Menon
2021-01-21 17:25   ` Suman Anna
2021-01-21 17:25     ` Suman Anna
2021-01-21 17:46     ` Nishanth Menon
2021-01-21 17:46       ` Nishanth Menon
2021-01-21 18:13       ` Suman Anna
2021-01-21 18:13         ` Suman Anna
2021-01-21 18:39         ` Nishanth Menon
2021-01-21 18:39           ` Nishanth Menon
2021-01-21 19:57           ` Suman Anna
2021-01-21 19:57             ` Suman Anna
2021-01-21 20:13             ` Nishanth Menon
2021-01-21 20:13               ` Nishanth Menon
2021-01-21 20:42               ` Suman Anna
2021-01-21 20:42                 ` Suman Anna
2021-01-21 21:18                 ` Nishanth Menon
2021-01-21 21:18                   ` Nishanth Menon
2021-01-21 22:57                   ` Suman Anna
2021-01-21 22:57                     ` Suman Anna
2021-01-22 11:23             ` Arnd Bergmann
2021-01-22 11:23               ` Arnd Bergmann
2021-01-22 13:00               ` Tony Lindgren
2021-01-22 13:00                 ` Tony Lindgren
2021-01-25 14:16                 ` Nishanth Menon
2021-01-25 14:16                   ` Nishanth Menon
2021-01-25 22:48   ` Suman Anna
2021-01-25 22:48     ` Suman Anna
2021-01-25 23:02     ` Suman Anna
2021-01-25 23:02       ` Suman Anna
2021-01-20 20:25 ` [PATCH v3 4/5] arm64: dts: ti: k3-am64-main: Enable DMA support Dave Gerlach
2021-01-20 20:25   ` Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 5/5] arm64: dts: ti: Add support for AM642 EVM Dave Gerlach
2021-01-20 20:25   ` Dave Gerlach
2021-01-25 16:44   ` Suman Anna
2021-01-25 16:44     ` Suman Anna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120202532.9011-1-d-gerlach@ti.com \
    --to=d-gerlach@ti.com \
    --cc=a-govindraju@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=s-anna@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.