All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Lee Jones <lee.jones@linaro.org>,
	Cezary Rojewski <cezary.rojewski@intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Jie Yang <yang.jie@linux.intel.com>,
	Mark Brown <broonie@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	alsa-devel@alsa-project.org
Subject: [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec
Date: Wed, 20 Jan 2021 22:49:52 +0100	[thread overview]
Message-ID: <20210120214957.140232-1-hdegoede@redhat.com> (raw)

Hi All,

Here is v4 of my series to add support for Intel Bay Trail based devices
which use a WM5102 codec for audio output/input.

This was developed and tested on a Lenovo Yoga Tablet 1051L.

The MFD and ASoC parts do not have any build-time dependencies
on each other. But the follow-up jack-detect series does have
patches depending on each-other and on this series. So IMHO it
would be best if this entire series would be merged through the
MFD tree to make merging the follow-up series easier.

Mark, if that is ok with you (and you are happy with the ASoC
changes) can you please Ack this ?

Changes in v4:
- Add a comment to the irq-flags override explaining that theoretically
  DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the
  IRQ controller does not support active low level interrupts

Changes in v3:
- Fix compilation error when CONFIG_ACPI is not set

Changes in v2:
- Split my WM5102 work into 2 series, one series adding basic support
  for Bay Trail boards with a WM5102 codec and a second series with
  the jack-detect work
- Various other minor code tweaks

Hans de Goede (4):
  mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1")
  mfd: arizona: Replace arizona_of_get_type() with
    device_get_match_data()
  mfd: arizona: Add support for ACPI enumeration of WM5102 connected
    over SPI
  ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()

Pierre-Louis Bossart (1):
  ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102

 drivers/mfd/arizona-core.c                    |  11 -
 drivers/mfd/arizona-i2c.c                     |  11 +-
 drivers/mfd/arizona-spi.c                     | 138 +++++-
 drivers/mfd/arizona.h                         |   9 -
 sound/soc/intel/boards/Kconfig                |  12 +
 sound/soc/intel/boards/Makefile               |   2 +
 sound/soc/intel/boards/bytcr_wm5102.c         | 465 ++++++++++++++++++
 .../intel/common/soc-acpi-intel-byt-match.c   |  16 +
 sound/soc/intel/common/soc-intel-quirks.h     |  25 +
 9 files changed, 661 insertions(+), 28 deletions(-)
 create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c

Regards,

Hans


WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede@redhat.com>
To: Lee Jones <lee.jones@linaro.org>,
	Cezary Rojewski <cezary.rojewski@intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Jie Yang <yang.jie@linux.intel.com>,
	Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec
Date: Wed, 20 Jan 2021 22:49:52 +0100	[thread overview]
Message-ID: <20210120214957.140232-1-hdegoede@redhat.com> (raw)

Hi All,

Here is v4 of my series to add support for Intel Bay Trail based devices
which use a WM5102 codec for audio output/input.

This was developed and tested on a Lenovo Yoga Tablet 1051L.

The MFD and ASoC parts do not have any build-time dependencies
on each other. But the follow-up jack-detect series does have
patches depending on each-other and on this series. So IMHO it
would be best if this entire series would be merged through the
MFD tree to make merging the follow-up series easier.

Mark, if that is ok with you (and you are happy with the ASoC
changes) can you please Ack this ?

Changes in v4:
- Add a comment to the irq-flags override explaining that theoretically
  DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the
  IRQ controller does not support active low level interrupts

Changes in v3:
- Fix compilation error when CONFIG_ACPI is not set

Changes in v2:
- Split my WM5102 work into 2 series, one series adding basic support
  for Bay Trail boards with a WM5102 codec and a second series with
  the jack-detect work
- Various other minor code tweaks

Hans de Goede (4):
  mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1")
  mfd: arizona: Replace arizona_of_get_type() with
    device_get_match_data()
  mfd: arizona: Add support for ACPI enumeration of WM5102 connected
    over SPI
  ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()

Pierre-Louis Bossart (1):
  ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102

 drivers/mfd/arizona-core.c                    |  11 -
 drivers/mfd/arizona-i2c.c                     |  11 +-
 drivers/mfd/arizona-spi.c                     | 138 +++++-
 drivers/mfd/arizona.h                         |   9 -
 sound/soc/intel/boards/Kconfig                |  12 +
 sound/soc/intel/boards/Makefile               |   2 +
 sound/soc/intel/boards/bytcr_wm5102.c         | 465 ++++++++++++++++++
 .../intel/common/soc-acpi-intel-byt-match.c   |  16 +
 sound/soc/intel/common/soc-intel-quirks.h     |  25 +
 9 files changed, 661 insertions(+), 28 deletions(-)
 create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c

Regards,

Hans


             reply	other threads:[~2021-01-20 22:29 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20 21:49 Hans de Goede [this message]
2021-01-20 21:49 ` [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec Hans de Goede
2021-01-20 21:49 ` [PATCH v4 1/5] mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1") Hans de Goede
2021-01-20 21:49   ` Hans de Goede
2021-02-04 13:55   ` Lee Jones
2021-02-04 13:55     ` Lee Jones
2021-01-20 21:49 ` [PATCH v4 2/5] mfd: arizona: Replace arizona_of_get_type() with device_get_match_data() Hans de Goede
2021-01-20 21:49   ` Hans de Goede
2021-02-04 13:55   ` Lee Jones
2021-02-04 13:55     ` Lee Jones
2021-01-20 21:49 ` [PATCH v4 3/5] mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI Hans de Goede
2021-01-20 21:49   ` Hans de Goede
2021-01-21 10:34   ` Charles Keepax
2021-01-21 10:34     ` Charles Keepax
2021-02-04 13:55   ` Lee Jones
2021-02-04 13:55     ` Lee Jones
2021-01-20 21:49 ` [PATCH v4 4/5] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr() Hans de Goede
2021-01-20 21:49   ` Hans de Goede
2021-02-04 13:56   ` Lee Jones
2021-02-04 13:56     ` Lee Jones
2021-02-04 14:05     ` Mark Brown
2021-02-04 14:05       ` Mark Brown
2021-02-04 15:04       ` Lee Jones
2021-02-04 15:04         ` Lee Jones
2021-02-04 15:11         ` Mark Brown
2021-02-04 15:11           ` Mark Brown
2021-02-04 15:40           ` Lee Jones
2021-02-04 15:40             ` Lee Jones
2021-02-04 19:42             ` Mark Brown
2021-02-04 19:42               ` Mark Brown
2021-02-05  8:34               ` Lee Jones
2021-02-05  8:34                 ` Lee Jones
2021-02-05 21:11                 ` Mark Brown
2021-02-05 21:11                   ` Mark Brown
2021-02-08  8:33                   ` Lee Jones
2021-02-08  8:33                     ` Lee Jones
2021-02-08 15:24                     ` Mark Brown
2021-02-08 15:24                       ` Mark Brown
2021-01-20 21:49 ` [PATCH v4 5/5] ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102 Hans de Goede
2021-01-20 21:49   ` Hans de Goede
2021-01-21 10:37   ` Charles Keepax
2021-01-21 10:37     ` Charles Keepax
2021-02-04 13:56   ` Lee Jones
2021-02-04 13:56     ` Lee Jones
2021-02-04 10:25 ` [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec Hans de Goede
2021-02-04 10:25   ` Hans de Goede
2021-02-04 10:57   ` Lee Jones
2021-02-04 10:57     ` Lee Jones
2021-02-04 11:07     ` Hans de Goede
2021-02-04 11:07       ` Hans de Goede
2021-02-04 12:43       ` Mark Brown
2021-02-04 12:43         ` Mark Brown
2021-02-04 13:18         ` Hans de Goede
2021-02-04 13:18           ` Hans de Goede
2021-02-04 14:04           ` Mark Brown
2021-02-04 14:04             ` Mark Brown
2021-02-04 13:46         ` Lee Jones
2021-02-04 13:46           ` Lee Jones
2021-02-04 15:09           ` Mark Brown
2021-02-04 15:09             ` Mark Brown
2021-02-04 15:21             ` Lee Jones
2021-02-04 15:21               ` Lee Jones
2021-02-04 16:48               ` Mark Brown
2021-02-04 16:48                 ` Mark Brown
2021-02-08 13:52 ` [GIT PULL] Immutable branch from MFD due for the v5.12 merge window Lee Jones
2021-02-08 13:52   ` Lee Jones
2021-02-08 18:38 ` (subset) [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec Mark Brown
2021-02-08 18:38   ` Mark Brown
2021-02-08 19:12   ` Hans de Goede
2021-02-08 19:12     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120214957.140232-1-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=lee.jones@linaro.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=yang.jie@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.