From: Robert Foss <robert.foss@linaro.org> To: agross@kernel.org, bjorn.andersson@linaro.org, robert.foss@linaro.org, todor.too@gmail.com, mchehab@kernel.org, robh+dt@kernel.org, catalin.marinas@arm.com, will@kernel.org, shawnguo@kernel.org, leoyang.li@nxp.com, geert+renesas@glider.be, arnd@arndb.de, Anson.Huang@nxp.com, michael@walle.cc, agx@sigxcpu.org, max.oss.09@gmail.com, angelogioacchino.delregno@somainline.org, linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, AngeloGioacchino Del Regno <kholk11@gmail.com>, Rob Herring <robh@kernel.org>, Andrey Konovalov <andrey.konovalov@linaro.org> Cc: Tomasz Figa <tfiga@chromium.org>, Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>, Sarvesh Sridutt <Sarvesh.Sridutt@smartwirelesscompute.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Jonathan Marek <jonathan@marek.ca> Subject: [PATCH v3 16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding Date: Wed, 27 Jan 2021 15:49:24 +0100 [thread overview] Message-ID: <20210127144930.2158242-17-robert.foss@linaro.org> (raw) In-Reply-To: <20210127144930.2158242-1-robert.foss@linaro.org> Add bindings for qcom,sdm845-camss in order to support the camera subsystem for SDM845. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v2 - Rob: Removed extra empty lines at end of file - Rob: Add new line at end of file - Rob: Remove redundant descriptions - Rob: Add power domain description - Rob: Make clock-lanes a constant - Rob: Rework to conform to new port schema - Add max & minItems to data-lanes - Remove ports requirement - endpoint & reg - Add proper commit message - Remove Todor as binding maintainer .../bindings/media/qcom,sdm845-camss.yaml | 370 ++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml new file mode 100644 index 000000000000..637b9f683bd1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -0,0 +1,370 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cphy_rx_src + - const: csi0 + - const: csi0_src + - const: csi1 + - const: csi1_src + - const: csi2 + - const: csi2_src + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy0_timer_src + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy1_timer_src + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy2_timer_src + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy3_timer_src + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: slow_ahb_src + - const: soc_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_src + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_src + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_src + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@a00000 { + compatible = "qcom,sdm845-camss"; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Robert Foss <robert.foss@linaro.org> To: agross@kernel.org, bjorn.andersson@linaro.org, robert.foss@linaro.org, todor.too@gmail.com, mchehab@kernel.org, robh+dt@kernel.org, catalin.marinas@arm.com, will@kernel.org, shawnguo@kernel.org, leoyang.li@nxp.com, geert+renesas@glider.be, arnd@arndb.de, Anson.Huang@nxp.com, michael@walle.cc, agx@sigxcpu.org, max.oss.09@gmail.com, angelogioacchino.delregno@somainline.org, linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, AngeloGioacchino Del Regno <kholk11@gmail.com>, Rob Herring <robh@kernel.org>, Andrey Konovalov <andrey.konovalov@linaro.org> Cc: Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>, Sarvesh Sridutt <Sarvesh.Sridutt@smartwirelesscompute.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Jonathan Marek <jonathan@marek.ca>, Tomasz Figa <tfiga@chromium.org> Subject: [PATCH v3 16/22] dt-bindings: media: camss: Add qcom, sdm845-camss binding Date: Wed, 27 Jan 2021 15:49:24 +0100 [thread overview] Message-ID: <20210127144930.2158242-17-robert.foss@linaro.org> (raw) In-Reply-To: <20210127144930.2158242-1-robert.foss@linaro.org> Add bindings for qcom,sdm845-camss in order to support the camera subsystem for SDM845. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v2 - Rob: Removed extra empty lines at end of file - Rob: Add new line at end of file - Rob: Remove redundant descriptions - Rob: Add power domain description - Rob: Make clock-lanes a constant - Rob: Rework to conform to new port schema - Add max & minItems to data-lanes - Remove ports requirement - endpoint & reg - Add proper commit message - Remove Todor as binding maintainer .../bindings/media/qcom,sdm845-camss.yaml | 370 ++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml new file mode 100644 index 000000000000..637b9f683bd1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -0,0 +1,370 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cphy_rx_src + - const: csi0 + - const: csi0_src + - const: csi1 + - const: csi1_src + - const: csi2 + - const: csi2_src + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy0_timer_src + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy1_timer_src + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy2_timer_src + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy3_timer_src + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: slow_ahb_src + - const: soc_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_src + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_src + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_src + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@a00000 { + compatible = "qcom,sdm845-camss"; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-27 15:00 UTC|newest] Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-27 14:49 [PATCH v3 00/22] Add support for the SDM845 Camera Subsystem Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 02/22] media: camss: Fix vfe_isr comment typo Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 03/22] media: camss: Add CAMSS_845 camss version Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 04/22] media: camss: Make ISPIF subdevice optional Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 05/22] media: camss: Refactor VFE HW version support Robert Foss 2021-01-28 0:18 ` Nicolas Boichat 2021-01-28 0:18 ` Nicolas Boichat 2021-01-28 10:06 ` Robert Foss 2021-01-28 10:06 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 06/22] media: camss: Add support for VFE hardware version Titan 170 Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 07/22] media: camss: Add missing format identifiers Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 08/22] media: camss: Refactor CSID HW version support Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 09/22] media: camss: Add support for CSID hardware version Titan 170 Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 10/22] media: camss: Add support for CSIPHY " Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-02-01 13:40 ` Sakari Ailus 2021-02-01 13:40 ` Sakari Ailus 2021-02-03 10:42 ` Robert Foss 2021-02-03 10:42 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 11/22] media: camss: Remove per VFE power domain toggling Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 12/22] media: camss: Enable SDM845 Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 13/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 13/22] dt-bindings: media: camss: Add qcom, msm8916-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 14/22] dt-bindings: media: camss: Add qcom, msm8996-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding Robert Foss 2021-01-30 17:23 ` Rob Herring 2021-01-30 17:23 ` Rob Herring 2021-02-03 11:23 ` Robert Foss 2021-02-03 11:23 ` Robert Foss 2021-02-04 16:01 ` Rob Herring 2021-02-04 16:01 ` Rob Herring 2021-01-27 14:49 ` Robert Foss [this message] 2021-01-27 14:49 ` [PATCH v3 16/22] dt-bindings: media: camss: Add qcom, sdm845-camss binding Robert Foss 2021-01-27 14:49 ` [PATCH v3 17/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 18/22] media: dt-bindings: media: Remove qcom,camss documentation Robert Foss 2021-01-27 14:49 ` [PATCH v3 18/22] media: dt-bindings: media: Remove qcom, camss documentation Robert Foss 2021-01-27 14:49 ` [PATCH v3 19/22] arm64: defconfig: Build Qcom CAMSS as module Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-02-02 22:44 ` Bjorn Andersson 2021-02-02 22:44 ` Bjorn Andersson 2021-02-03 10:28 ` Robert Foss 2021-02-03 10:28 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 20/22] arm64: dts: sdm845: Add CAMSS ISP node Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 21/22] arm64: dts: sdm845-db845c: Configure regulators for camss node Robert Foss 2021-01-27 14:49 ` Robert Foss 2021-01-27 14:49 ` [PATCH v3 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP Robert Foss 2021-01-27 14:49 ` Robert Foss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210127144930.2158242-17-robert.foss@linaro.org \ --to=robert.foss@linaro.org \ --cc=Anson.Huang@nxp.com \ --cc=Sarvesh.Sridutt@smartwirelesscompute.com \ --cc=agross@kernel.org \ --cc=agx@sigxcpu.org \ --cc=akapatra@quicinc.com \ --cc=andrey.konovalov@linaro.org \ --cc=angelogioacchino.delregno@somainline.org \ --cc=arnd@arndb.de \ --cc=bjorn.andersson@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=geert+renesas@glider.be \ --cc=jonathan@marek.ca \ --cc=kholk11@gmail.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=max.oss.09@gmail.com \ --cc=mchehab@kernel.org \ --cc=michael@walle.cc \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=tfiga@chromium.org \ --cc=todor.too@gmail.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.