From: Viswas G <Viswas.G@microchip.com>
To: <linux-scsi@vger.kernel.org>
Cc: <Vasanthalakshmi.Tharmarajan@microchip.com>,
<Viswas.G@microchip.com>, <Ruksar.devadi@microchip.com>,
<vishakhavc@google.com>, <radha@google.com>,
<jinpu.wang@cloud.ionos.com>
Subject: [PATCH 5/7] pm80xx: Completing pending IO after fatal error
Date: Wed, 24 Feb 2021 21:28:00 +0530 [thread overview]
Message-ID: <20210224155802.13292-6-Viswas.G@microchip.com> (raw)
In-Reply-To: <20210224155802.13292-1-Viswas.G@microchip.com>
From: Ruksar Devadi <Ruksar.devadi@microchip.com>
When controller runs into fatal error, IOs get stuck with no response,
handler event is defined to complete the pending IOs
(SAS task and internal task) and also perform the cleanup for the
drives.
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 66 ++++++++++++++++++++++++++++++++++++----
drivers/scsi/pm8001/pm8001_hwi.h | 1 +
drivers/scsi/pm8001/pm8001_sas.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/pm8001/pm80xx_hwi.c | 1 +
drivers/scsi/pm8001/pm80xx_hwi.h | 1 +
6 files changed, 65 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 49bf2f70a470..4e0ce044ac69 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1499,12 +1499,14 @@ void pm8001_work_fn(struct work_struct *work)
* was cancelled. This nullification happens when the device
* goes away.
*/
- pm8001_dev = pw->data; /* Most stash device structure */
- if ((pm8001_dev == NULL)
- || ((pw->handler != IO_XFER_ERROR_BREAK)
- && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
- kfree(pw);
- return;
+ if (pw->handler != IO_FATAL_ERROR) {
+ pm8001_dev = pw->data; /* Most stash device structure */
+ if ((pm8001_dev == NULL)
+ || ((pw->handler != IO_XFER_ERROR_BREAK)
+ && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
+ kfree(pw);
+ return;
+ }
}
switch (pw->handler) {
@@ -1668,6 +1670,58 @@ void pm8001_work_fn(struct work_struct *work)
dev = pm8001_dev->sas_device;
pm8001_I_T_nexus_reset(dev);
break;
+ case IO_FATAL_ERROR:
+ {
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ struct pm8001_ccb_info *ccb;
+ struct task_status_struct *ts;
+ struct sas_task *task;
+ int i;
+ u32 tag, device_id;
+
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ task = ccb->task;
+ ts = &task->task_status;
+ tag = ccb->ccb_tag;
+ /* check if tag is NULL */
+ if (!tag) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "tag Null\n");
+ continue;
+ }
+ if (task != NULL) {
+ dev = task->dev;
+ if (!dev) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "dev is NULL\n");
+ continue;
+ }
+ /*complete sas task and update to top layer */
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ ts->resp = SAS_TASK_COMPLETE;
+ task->task_done(task);
+ } else if (tag != 0xFFFFFFFF) {
+ /* complete the internal commands/non-sas task */
+ pm8001_dev = ccb->device;
+ if (pm8001_dev->dcompletion) {
+ complete(pm8001_dev->dcompletion);
+ pm8001_dev->dcompletion = NULL;
+ }
+ complete(pm8001_ha->nvmd_completion);
+ pm8001_tag_free(pm8001_ha, tag);
+ }
+ }
+ /* Deregsiter all the device ids */
+ for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+ pm8001_dev = &pm8001_ha->devices[i];
+ device_id = pm8001_dev->device_id;
+ if (device_id) {
+ PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+ pm8001_free_dev(pm8001_dev);
+ }
+ }
+ } break;
}
kfree(pw);
}
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 6d91e2446542..d1f3aa93325b 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -805,6 +805,7 @@ struct set_dev_state_resp {
#define IO_ABORT_IN_PROGRESS 0x40
#define IO_ABORT_DELAYED 0x41
#define IO_INVALID_LENGTH 0x42
+#define IO_FATAL_ERROR 0x51
/* WARNING: This error code must always be the last number.
* If you add error code, modify this code also
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index a98d4496ff8b..edec599ac641 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -590,7 +590,7 @@ struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
return NULL;
}
-static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
+void pm8001_free_dev(struct pm8001_device *pm8001_dev)
{
u32 id = pm8001_dev->id;
memset(pm8001_dev, 0, sizeof(*pm8001_dev));
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 039ed91e9841..36cd37c8c29a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -727,6 +727,7 @@ ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
struct device_attribute *attr, char *buf);
ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
int pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha);
+void pm8001_free_dev(struct pm8001_device *pm8001_dev);
/* ctl shared API */
extern struct device_attribute *pm8001_host_attrs[];
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 84315560e8e1..1aa3a499c85a 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4126,6 +4126,7 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
pm8001_dbg(pm8001_ha, FAIL,
"Firmware Fatal error! Regval:0x%x\n",
regval);
+ pm8001_handle_event(pm8001_ha, NULL, IO_FATAL_ERROR);
print_scratchpad_registers(pm8001_ha);
return ret;
}
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 2c8e85cfdbc4..c7e5d93bea92 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1272,6 +1272,7 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE 0x47
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED 0x48
#define IO_DS_INVALID 0x49
+#define IO_FATAL_ERROR 0x51
/* WARNING: the value is not contiguous from here */
#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR 0x52
#define IO_XFER_DMA_ACTIVATE_TIMEOUT 0x53
--
2.16.3
next prev parent reply other threads:[~2021-02-24 16:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-24 15:57 [PATCH 0/7] pm80xx updates Viswas G
2021-02-24 15:57 ` [PATCH 1/7] pm80xx: Add sysfs attribute to check mpi state Viswas G
2021-03-04 9:27 ` Jinpu Wang
2021-02-24 15:57 ` [PATCH 2/7] pm80xx: Add sysfs attribute to track RAAE count Viswas G
2021-03-04 9:28 ` Jinpu Wang
2021-02-24 15:57 ` [PATCH 3/7] pm80xx: Add sysfs attribute to track iop0 count Viswas G
2021-03-04 9:28 ` Jinpu Wang
2021-02-24 15:57 ` [PATCH 4/7] pm80xx: Add sysfs attribute to track iop1 count Viswas G
2021-03-04 9:28 ` Jinpu Wang
2021-03-05 8:02 ` John Garry
2021-02-24 15:58 ` Viswas G [this message]
2021-03-04 9:32 ` [PATCH 5/7] pm80xx: Completing pending IO after fatal error Jinpu Wang
2021-02-24 15:58 ` [PATCH 6/7] pm80xx: Reset PI and CI memory during re-initialize Viswas G
2021-03-04 9:37 ` Jinpu Wang
2021-03-04 16:40 ` Viswas.G
2021-03-05 6:45 ` Jinpu Wang
2021-02-24 15:58 ` [PATCH 7/7] pm80xx: remove global lock from outbound queue processing Viswas G
2021-03-04 9:39 ` Jinpu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210224155802.13292-6-Viswas.G@microchip.com \
--to=viswas.g@microchip.com \
--cc=Ruksar.devadi@microchip.com \
--cc=Vasanthalakshmi.Tharmarajan@microchip.com \
--cc=jinpu.wang@cloud.ionos.com \
--cc=linux-scsi@vger.kernel.org \
--cc=radha@google.com \
--cc=vishakhavc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.