All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Tatashin <pasha.tatashin@soleen.com>
To: pasha.tatashin@soleen.com, jmorris@namei.org, sashal@kernel.org,
	ebiederm@xmission.com, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org, corbet@lwn.net,
	catalin.marinas@arm.com, will@kernel.org,
	linux-arm-kernel@lists.infradead.org, maz@kernel.org,
	james.morse@arm.com, vladimir.murzin@arm.com,
	matthias.bgg@gmail.com, linux-mm@kvack.org, mark.rutland@arm.com,
	steve.capper@arm.com, rfontana@redhat.com, tglx@linutronix.de,
	selindag@gmail.com, tyhicks@linux.microsoft.com
Subject: [PATCH v12 05/17] arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors
Date: Tue,  2 Mar 2021 19:22:18 -0500	[thread overview]
Message-ID: <20210303002230.1083176-6-pasha.tatashin@soleen.com> (raw)
In-Reply-To: <20210303002230.1083176-1-pasha.tatashin@soleen.com>

Users of trans_pgd may also need a copy of vector table because it is
also may be overwritten if a linear map can be overwritten.

Move setup of EL2 vectors from hibernate to trans_pgd, so it can be
later shared with kexec as well.

Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
---
 arch/arm64/include/asm/trans_pgd.h |  3 +++
 arch/arm64/include/asm/virt.h      |  3 +++
 arch/arm64/kernel/hibernate.c      | 28 ++++++++++------------------
 arch/arm64/mm/trans_pgd.c          | 20 ++++++++++++++++++++
 4 files changed, 36 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/include/asm/trans_pgd.h b/arch/arm64/include/asm/trans_pgd.h
index 5d08e5adf3d5..e0760e52d36d 100644
--- a/arch/arm64/include/asm/trans_pgd.h
+++ b/arch/arm64/include/asm/trans_pgd.h
@@ -36,4 +36,7 @@ int trans_pgd_map_page(struct trans_pgd_info *info, pgd_t *trans_pgd,
 int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 			 unsigned long *t0sz, void *page);
 
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors);
+
 #endif /* _ASM_TRANS_TABLE_H */
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 4216c8623538..bfbb66018114 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -67,6 +67,9 @@
  */
 extern u32 __boot_cpu_mode[2];
 
+extern char __hyp_stub_vectors[];
+#define ARM64_VECTOR_TABLE_LEN	SZ_2K
+
 void __hyp_set_vectors(phys_addr_t phys_vector_base);
 void __hyp_reset_vectors(void);
 
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index c764574a1acb..0b8bad8bb6eb 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -48,12 +48,6 @@
  */
 extern int in_suspend;
 
-/* temporary el2 vectors in the __hibernate_exit_text section. */
-extern char hibernate_el2_vectors[];
-
-/* hyp-stub vectors, used to restore el2 during resume from hibernate. */
-extern char __hyp_stub_vectors[];
-
 /*
  * The logical cpu number we should resume on, initialised to a non-cpu
  * number.
@@ -428,6 +422,7 @@ int swsusp_arch_resume(void)
 	void *zero_page;
 	size_t exit_size;
 	pgd_t *tmp_pg_dir;
+	phys_addr_t el2_vectors;
 	void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *,
 					  void *, phys_addr_t, phys_addr_t);
 	struct trans_pgd_info trans_info = {
@@ -455,6 +450,14 @@ int swsusp_arch_resume(void)
 		return -ENOMEM;
 	}
 
+	if (is_hyp_callable()) {
+		rc = trans_pgd_copy_el2_vectors(&trans_info, &el2_vectors);
+		if (rc) {
+			pr_err("Failed to setup el2 vectors\n");
+			return rc;
+		}
+	}
+
 	exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start;
 	/*
 	 * Copy swsusp_arch_suspend_exit() to a safe page. This will generate
@@ -467,25 +470,14 @@ int swsusp_arch_resume(void)
 		return rc;
 	}
 
-	/*
-	 * The hibernate exit text contains a set of el2 vectors, that will
-	 * be executed at el2 with the mmu off in order to reload hyp-stub.
-	 */
-	__flush_dcache_area(hibernate_exit, exit_size);
-
 	/*
 	 * KASLR will cause the el2 vectors to be in a different location in
 	 * the resumed kernel. Load hibernate's temporary copy into el2.
 	 *
 	 * We can skip this step if we booted at EL1, or are running with VHE.
 	 */
-	if (is_hyp_callable()) {
-		phys_addr_t el2_vectors = (phys_addr_t)hibernate_exit;
-		el2_vectors += hibernate_el2_vectors -
-			       __hibernate_exit_text_start;     /* offset */
-
+	if (is_hyp_callable())
 		__hyp_set_vectors(el2_vectors);
-	}
 
 	hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1,
 		       resume_hdr.reenter_kernel, restore_pblist,
diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
index 527f0a39c3da..61549451ed3a 100644
--- a/arch/arm64/mm/trans_pgd.c
+++ b/arch/arm64/mm/trans_pgd.c
@@ -322,3 +322,23 @@ int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 
 	return 0;
 }
+
+/*
+ * Create a copy of the vector table so we can call HVC_SET_VECTORS or
+ * HVC_SOFT_RESTART from contexts where the table may be overwritten.
+ */
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors)
+{
+	void *hyp_stub = trans_alloc(info);
+
+	if (!hyp_stub)
+		return -ENOMEM;
+	*el2_vectors = virt_to_phys(hyp_stub);
+	memcpy(hyp_stub, &__hyp_stub_vectors, ARM64_VECTOR_TABLE_LEN);
+	__flush_icache_range((unsigned long)hyp_stub,
+			     (unsigned long)hyp_stub + ARM64_VECTOR_TABLE_LEN);
+	__flush_dcache_area(hyp_stub, ARM64_VECTOR_TABLE_LEN);
+
+	return 0;
+}
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Pavel Tatashin <pasha.tatashin@soleen.com>
To: pasha.tatashin@soleen.com, jmorris@namei.org, sashal@kernel.org,
	ebiederm@xmission.com, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org, corbet@lwn.net,
	catalin.marinas@arm.com, will@kernel.org,
	linux-arm-kernel@lists.infradead.org, maz@kernel.org,
	james.morse@arm.com, vladimir.murzin@arm.com,
	matthias.bgg@gmail.com, linux-mm@kvack.org, mark.rutland@arm.com,
	steve.capper@arm.com, rfontana@redhat.com, tglx@linutronix.de,
	selindag@gmail.com, tyhicks@linux.microsoft.com
Subject: [PATCH v12 05/17] arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors
Date: Tue,  2 Mar 2021 19:22:18 -0500	[thread overview]
Message-ID: <20210303002230.1083176-6-pasha.tatashin@soleen.com> (raw)
In-Reply-To: <20210303002230.1083176-1-pasha.tatashin@soleen.com>

Users of trans_pgd may also need a copy of vector table because it is
also may be overwritten if a linear map can be overwritten.

Move setup of EL2 vectors from hibernate to trans_pgd, so it can be
later shared with kexec as well.

Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
---
 arch/arm64/include/asm/trans_pgd.h |  3 +++
 arch/arm64/include/asm/virt.h      |  3 +++
 arch/arm64/kernel/hibernate.c      | 28 ++++++++++------------------
 arch/arm64/mm/trans_pgd.c          | 20 ++++++++++++++++++++
 4 files changed, 36 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/include/asm/trans_pgd.h b/arch/arm64/include/asm/trans_pgd.h
index 5d08e5adf3d5..e0760e52d36d 100644
--- a/arch/arm64/include/asm/trans_pgd.h
+++ b/arch/arm64/include/asm/trans_pgd.h
@@ -36,4 +36,7 @@ int trans_pgd_map_page(struct trans_pgd_info *info, pgd_t *trans_pgd,
 int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 			 unsigned long *t0sz, void *page);
 
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors);
+
 #endif /* _ASM_TRANS_TABLE_H */
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 4216c8623538..bfbb66018114 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -67,6 +67,9 @@
  */
 extern u32 __boot_cpu_mode[2];
 
+extern char __hyp_stub_vectors[];
+#define ARM64_VECTOR_TABLE_LEN	SZ_2K
+
 void __hyp_set_vectors(phys_addr_t phys_vector_base);
 void __hyp_reset_vectors(void);
 
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index c764574a1acb..0b8bad8bb6eb 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -48,12 +48,6 @@
  */
 extern int in_suspend;
 
-/* temporary el2 vectors in the __hibernate_exit_text section. */
-extern char hibernate_el2_vectors[];
-
-/* hyp-stub vectors, used to restore el2 during resume from hibernate. */
-extern char __hyp_stub_vectors[];
-
 /*
  * The logical cpu number we should resume on, initialised to a non-cpu
  * number.
@@ -428,6 +422,7 @@ int swsusp_arch_resume(void)
 	void *zero_page;
 	size_t exit_size;
 	pgd_t *tmp_pg_dir;
+	phys_addr_t el2_vectors;
 	void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *,
 					  void *, phys_addr_t, phys_addr_t);
 	struct trans_pgd_info trans_info = {
@@ -455,6 +450,14 @@ int swsusp_arch_resume(void)
 		return -ENOMEM;
 	}
 
+	if (is_hyp_callable()) {
+		rc = trans_pgd_copy_el2_vectors(&trans_info, &el2_vectors);
+		if (rc) {
+			pr_err("Failed to setup el2 vectors\n");
+			return rc;
+		}
+	}
+
 	exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start;
 	/*
 	 * Copy swsusp_arch_suspend_exit() to a safe page. This will generate
@@ -467,25 +470,14 @@ int swsusp_arch_resume(void)
 		return rc;
 	}
 
-	/*
-	 * The hibernate exit text contains a set of el2 vectors, that will
-	 * be executed at el2 with the mmu off in order to reload hyp-stub.
-	 */
-	__flush_dcache_area(hibernate_exit, exit_size);
-
 	/*
 	 * KASLR will cause the el2 vectors to be in a different location in
 	 * the resumed kernel. Load hibernate's temporary copy into el2.
 	 *
 	 * We can skip this step if we booted at EL1, or are running with VHE.
 	 */
-	if (is_hyp_callable()) {
-		phys_addr_t el2_vectors = (phys_addr_t)hibernate_exit;
-		el2_vectors += hibernate_el2_vectors -
-			       __hibernate_exit_text_start;     /* offset */
-
+	if (is_hyp_callable())
 		__hyp_set_vectors(el2_vectors);
-	}
 
 	hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1,
 		       resume_hdr.reenter_kernel, restore_pblist,
diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
index 527f0a39c3da..61549451ed3a 100644
--- a/arch/arm64/mm/trans_pgd.c
+++ b/arch/arm64/mm/trans_pgd.c
@@ -322,3 +322,23 @@ int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 
 	return 0;
 }
+
+/*
+ * Create a copy of the vector table so we can call HVC_SET_VECTORS or
+ * HVC_SOFT_RESTART from contexts where the table may be overwritten.
+ */
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors)
+{
+	void *hyp_stub = trans_alloc(info);
+
+	if (!hyp_stub)
+		return -ENOMEM;
+	*el2_vectors = virt_to_phys(hyp_stub);
+	memcpy(hyp_stub, &__hyp_stub_vectors, ARM64_VECTOR_TABLE_LEN);
+	__flush_icache_range((unsigned long)hyp_stub,
+			     (unsigned long)hyp_stub + ARM64_VECTOR_TABLE_LEN);
+	__flush_dcache_area(hyp_stub, ARM64_VECTOR_TABLE_LEN);
+
+	return 0;
+}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Pavel Tatashin <pasha.tatashin@soleen.com>
To: pasha.tatashin@soleen.com, jmorris@namei.org, sashal@kernel.org,
	ebiederm@xmission.com, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org, corbet@lwn.net,
	catalin.marinas@arm.com, will@kernel.org,
	linux-arm-kernel@lists.infradead.org, maz@kernel.org,
	james.morse@arm.com, vladimir.murzin@arm.com,
	matthias.bgg@gmail.com, linux-mm@kvack.org, mark.rutland@arm.com,
	steve.capper@arm.com, rfontana@redhat.com, tglx@linutronix.de,
	selindag@gmail.com, tyhicks@linux.microsoft.com
Subject: [PATCH v12 05/17] arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors
Date: Tue,  2 Mar 2021 19:22:18 -0500	[thread overview]
Message-ID: <20210303002230.1083176-6-pasha.tatashin@soleen.com> (raw)
In-Reply-To: <20210303002230.1083176-1-pasha.tatashin@soleen.com>

Users of trans_pgd may also need a copy of vector table because it is
also may be overwritten if a linear map can be overwritten.

Move setup of EL2 vectors from hibernate to trans_pgd, so it can be
later shared with kexec as well.

Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
---
 arch/arm64/include/asm/trans_pgd.h |  3 +++
 arch/arm64/include/asm/virt.h      |  3 +++
 arch/arm64/kernel/hibernate.c      | 28 ++++++++++------------------
 arch/arm64/mm/trans_pgd.c          | 20 ++++++++++++++++++++
 4 files changed, 36 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/include/asm/trans_pgd.h b/arch/arm64/include/asm/trans_pgd.h
index 5d08e5adf3d5..e0760e52d36d 100644
--- a/arch/arm64/include/asm/trans_pgd.h
+++ b/arch/arm64/include/asm/trans_pgd.h
@@ -36,4 +36,7 @@ int trans_pgd_map_page(struct trans_pgd_info *info, pgd_t *trans_pgd,
 int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 			 unsigned long *t0sz, void *page);
 
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors);
+
 #endif /* _ASM_TRANS_TABLE_H */
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 4216c8623538..bfbb66018114 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -67,6 +67,9 @@
  */
 extern u32 __boot_cpu_mode[2];
 
+extern char __hyp_stub_vectors[];
+#define ARM64_VECTOR_TABLE_LEN	SZ_2K
+
 void __hyp_set_vectors(phys_addr_t phys_vector_base);
 void __hyp_reset_vectors(void);
 
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index c764574a1acb..0b8bad8bb6eb 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -48,12 +48,6 @@
  */
 extern int in_suspend;
 
-/* temporary el2 vectors in the __hibernate_exit_text section. */
-extern char hibernate_el2_vectors[];
-
-/* hyp-stub vectors, used to restore el2 during resume from hibernate. */
-extern char __hyp_stub_vectors[];
-
 /*
  * The logical cpu number we should resume on, initialised to a non-cpu
  * number.
@@ -428,6 +422,7 @@ int swsusp_arch_resume(void)
 	void *zero_page;
 	size_t exit_size;
 	pgd_t *tmp_pg_dir;
+	phys_addr_t el2_vectors;
 	void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *,
 					  void *, phys_addr_t, phys_addr_t);
 	struct trans_pgd_info trans_info = {
@@ -455,6 +450,14 @@ int swsusp_arch_resume(void)
 		return -ENOMEM;
 	}
 
+	if (is_hyp_callable()) {
+		rc = trans_pgd_copy_el2_vectors(&trans_info, &el2_vectors);
+		if (rc) {
+			pr_err("Failed to setup el2 vectors\n");
+			return rc;
+		}
+	}
+
 	exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start;
 	/*
 	 * Copy swsusp_arch_suspend_exit() to a safe page. This will generate
@@ -467,25 +470,14 @@ int swsusp_arch_resume(void)
 		return rc;
 	}
 
-	/*
-	 * The hibernate exit text contains a set of el2 vectors, that will
-	 * be executed at el2 with the mmu off in order to reload hyp-stub.
-	 */
-	__flush_dcache_area(hibernate_exit, exit_size);
-
 	/*
 	 * KASLR will cause the el2 vectors to be in a different location in
 	 * the resumed kernel. Load hibernate's temporary copy into el2.
 	 *
 	 * We can skip this step if we booted at EL1, or are running with VHE.
 	 */
-	if (is_hyp_callable()) {
-		phys_addr_t el2_vectors = (phys_addr_t)hibernate_exit;
-		el2_vectors += hibernate_el2_vectors -
-			       __hibernate_exit_text_start;     /* offset */
-
+	if (is_hyp_callable())
 		__hyp_set_vectors(el2_vectors);
-	}
 
 	hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1,
 		       resume_hdr.reenter_kernel, restore_pblist,
diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
index 527f0a39c3da..61549451ed3a 100644
--- a/arch/arm64/mm/trans_pgd.c
+++ b/arch/arm64/mm/trans_pgd.c
@@ -322,3 +322,23 @@ int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
 
 	return 0;
 }
+
+/*
+ * Create a copy of the vector table so we can call HVC_SET_VECTORS or
+ * HVC_SOFT_RESTART from contexts where the table may be overwritten.
+ */
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors)
+{
+	void *hyp_stub = trans_alloc(info);
+
+	if (!hyp_stub)
+		return -ENOMEM;
+	*el2_vectors = virt_to_phys(hyp_stub);
+	memcpy(hyp_stub, &__hyp_stub_vectors, ARM64_VECTOR_TABLE_LEN);
+	__flush_icache_range((unsigned long)hyp_stub,
+			     (unsigned long)hyp_stub + ARM64_VECTOR_TABLE_LEN);
+	__flush_dcache_area(hyp_stub, ARM64_VECTOR_TABLE_LEN);
+
+	return 0;
+}
-- 
2.25.1


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  parent reply	other threads:[~2021-03-03 11:03 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-03  0:22 [PATCH v12 00/17] arm64: MMU enabled kexec relocation Pavel Tatashin
2021-03-03  0:22 ` Pavel Tatashin
2021-03-03  0:22 ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 01/17] arm64: hyp-stub: Check the size of the HYP stub's vectors Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 02/17] arm64: hyp-stub: Move invalid vector entries into the vectors Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 03/17] arm64: hyp-stub: Move el1_sync " Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 04/17] arm64: kernel: add helper for booted at EL2 and not VHE Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` Pavel Tatashin [this message]
2021-03-03  0:22   ` [PATCH v12 05/17] arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 06/17] arm64: hibernate: abstract ttrb0 setup function Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 07/17] arm64: kexec: flush image and lists during kexec load time Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 08/17] arm64: kexec: skip relocation code for inplace kexec Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 09/17] arm64: kexec: Use dcache ops macros instead of open-coding Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 10/17] arm64: kexec: pass kimage as the only argument to relocation function Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 11/17] arm64: kexec: kexec may require EL2 vectors Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 12/17] arm64: kexec: relocate in EL1 mode Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 13/17] arm64: kexec: use ld script for relocation function Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 14/17] arm64: kexec: install a copy of the linear-map Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 15/17] arm64: kexec: keep MMU enabled during kexec relocation Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 16/17] arm64: kexec: remove the pre-kexec PoC maintenance Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22 ` [PATCH v12 17/17] arm64: kexec: Remove cpu-reset.h Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-03  0:22   ` Pavel Tatashin
2021-03-22  1:36 ` [PATCH v12 00/17] arm64: MMU enabled kexec relocation Pingfan Liu
2021-03-22  1:36   ` Pingfan Liu
2021-03-22  1:36   ` Pingfan Liu
2021-03-22  1:36   ` Pingfan Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210303002230.1083176-6-pasha.tatashin@soleen.com \
    --to=pasha.tatashin@soleen.com \
    --cc=catalin.marinas@arm.com \
    --cc=corbet@lwn.net \
    --cc=ebiederm@xmission.com \
    --cc=james.morse@arm.com \
    --cc=jmorris@namei.org \
    --cc=kexec@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maz@kernel.org \
    --cc=rfontana@redhat.com \
    --cc=sashal@kernel.org \
    --cc=selindag@gmail.com \
    --cc=steve.capper@arm.com \
    --cc=tglx@linutronix.de \
    --cc=tyhicks@linux.microsoft.com \
    --cc=vladimir.murzin@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.