From: Seiya Wang <seiya.wang@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Ulf Hansson <ulf.hansson@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Brown <broonie@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Hsin-Yi Wang <hsinyi@chromium.org>,
Seiya Wang <seiya.wang@mediatek.com>,
Fabien Parent <fparent@baylibre.com>,
Sean Wang <sean.wang@mediatek.com>,
Zhiyong Tao <zhiyong.tao@mediatek.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Wenbin Mei <wenbin.mei@mediatek.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bayi Cheng <bayi.cheng@mediatek.com>,
Chuanhong Guo <gch981213@gmail.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<linux-mmc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-serial@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-watchdog@vger.kernel.org>, <srv_heupstream@mediatek.com>
Subject: [PATCH 10/10] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile
Date: Tue, 16 Mar 2021 19:14:43 +0800 [thread overview]
Message-ID: <20210316111443.3332-11-seiya.wang@mediatek.com> (raw)
In-Reply-To: <20210316111443.3332-1-seiya.wang@mediatek.com>
Add basic chip support for Mediatek MT8195
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 29 ++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 477 ++++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index deba27ab7657..aee4b9715d2f 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 000000000000..82bb10e9a531
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+ model = "MediaTek MT8195 evaluation board";
+ compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 000000000000..356583fe4f03
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "mediatek,mt8195";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ clk26m: oscillator0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "clk32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+ cpuoff_l: cpuoff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <95>;
+ min-residency-us = <580>;
+ };
+ cpuoff_b: cpuoff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <45>;
+ exit-latency-us = <140>;
+ min-residency-us = <740>;
+ };
+ clusteroff_l: clusteroff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <155>;
+ min-residency-us = <840>;
+ };
+ clusteroff_b: clusteroff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ dsu-pmu {
+ compatible = "arm,dsu-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a78 {
+ compatible = "arm,cortex-a78-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ };
+ };
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8195-timer", "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>;
+ };
+
+ uart0: serial@11001100 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001100 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11001200 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001200 0 0x100>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ };
+
+ uart2: serial@11001300 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001300 0 0x100>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11001400 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001400 0 0x100>;
+ interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart4: serial@11001500 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001500 0 0x100>;
+ interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart5: serial@11001600 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001600 0 0x100>;
+ interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ auxadc: auxadc@11002000 {
+ compatible = "mediatek,mt8195-auxadc", "mediatek,mt8173-auxadc";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11230000 0 0x10000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ nor_flash: nor@1132c000 {
+ compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
+ reg = <0 0x1132c000 0 0x1000>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy2@11c40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c40000 0x700>;
+ status = "disabled";
+
+ u2port2: usb2-phy2@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy3: usb-phy3@11c50000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c50000 0x700>;
+ status = "disabled";
+
+ u2port3: usb2-phy3@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy1: usb-phy1@11e30000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e30000 0xe00>;
+ status = "disabled";
+
+ u2port1: usb2-phy1@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port1: usb3-phy1@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy0: usb-phy0@11e40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e40000 0xe00>;
+ status = "disabled";
+
+ u2port0: usb2-phy0@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port0: usb3-phy0@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ ufsphy: phy@11fa0000 {
+ compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+ reg = <0 0x11fa0000 0 0xc000>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "unipro", "mp";
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Seiya Wang <seiya.wang@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Ulf Hansson <ulf.hansson@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
Mark Brown <broonie@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
"Guenter Roeck" <linux@roeck-us.net>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Hsin-Yi Wang <hsinyi@chromium.org>,
"Seiya Wang" <seiya.wang@mediatek.com>,
Fabien Parent <fparent@baylibre.com>,
"Sean Wang" <sean.wang@mediatek.com>,
Zhiyong Tao <zhiyong.tao@mediatek.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Wenbin Mei <wenbin.mei@mediatek.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bayi Cheng <bayi.cheng@mediatek.com>,
Chuanhong Guo <gch981213@gmail.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<linux-mmc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-serial@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-watchdog@vger.kernel.org>, <srv_heupstream@mediatek.com>
Subject: [PATCH 10/10] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile
Date: Tue, 16 Mar 2021 19:14:43 +0800 [thread overview]
Message-ID: <20210316111443.3332-11-seiya.wang@mediatek.com> (raw)
In-Reply-To: <20210316111443.3332-1-seiya.wang@mediatek.com>
Add basic chip support for Mediatek MT8195
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 29 ++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 477 ++++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index deba27ab7657..aee4b9715d2f 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 000000000000..82bb10e9a531
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+ model = "MediaTek MT8195 evaluation board";
+ compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 000000000000..356583fe4f03
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "mediatek,mt8195";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ clk26m: oscillator0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "clk32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+ cpuoff_l: cpuoff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <95>;
+ min-residency-us = <580>;
+ };
+ cpuoff_b: cpuoff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <45>;
+ exit-latency-us = <140>;
+ min-residency-us = <740>;
+ };
+ clusteroff_l: clusteroff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <155>;
+ min-residency-us = <840>;
+ };
+ clusteroff_b: clusteroff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ dsu-pmu {
+ compatible = "arm,dsu-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a78 {
+ compatible = "arm,cortex-a78-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ };
+ };
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8195-timer", "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>;
+ };
+
+ uart0: serial@11001100 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001100 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11001200 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001200 0 0x100>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ };
+
+ uart2: serial@11001300 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001300 0 0x100>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11001400 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001400 0 0x100>;
+ interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart4: serial@11001500 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001500 0 0x100>;
+ interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart5: serial@11001600 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001600 0 0x100>;
+ interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ auxadc: auxadc@11002000 {
+ compatible = "mediatek,mt8195-auxadc", "mediatek,mt8173-auxadc";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11230000 0 0x10000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ nor_flash: nor@1132c000 {
+ compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
+ reg = <0 0x1132c000 0 0x1000>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy2@11c40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c40000 0x700>;
+ status = "disabled";
+
+ u2port2: usb2-phy2@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy3: usb-phy3@11c50000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c50000 0x700>;
+ status = "disabled";
+
+ u2port3: usb2-phy3@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy1: usb-phy1@11e30000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e30000 0xe00>;
+ status = "disabled";
+
+ u2port1: usb2-phy1@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port1: usb3-phy1@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy0: usb-phy0@11e40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e40000 0xe00>;
+ status = "disabled";
+
+ u2port0: usb2-phy0@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port0: usb3-phy0@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ ufsphy: phy@11fa0000 {
+ compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+ reg = <0 0x11fa0000 0 0xc000>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "unipro", "mp";
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.14.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Seiya Wang <seiya.wang@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Ulf Hansson <ulf.hansson@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
Mark Brown <broonie@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
"Guenter Roeck" <linux@roeck-us.net>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Hsin-Yi Wang <hsinyi@chromium.org>,
"Seiya Wang" <seiya.wang@mediatek.com>,
Fabien Parent <fparent@baylibre.com>,
"Sean Wang" <sean.wang@mediatek.com>,
Zhiyong Tao <zhiyong.tao@mediatek.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Wenbin Mei <wenbin.mei@mediatek.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bayi Cheng <bayi.cheng@mediatek.com>,
Chuanhong Guo <gch981213@gmail.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<linux-mmc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-serial@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-watchdog@vger.kernel.org>, <srv_heupstream@mediatek.com>
Subject: [PATCH 10/10] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile
Date: Tue, 16 Mar 2021 19:14:43 +0800 [thread overview]
Message-ID: <20210316111443.3332-11-seiya.wang@mediatek.com> (raw)
In-Reply-To: <20210316111443.3332-1-seiya.wang@mediatek.com>
Add basic chip support for Mediatek MT8195
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 29 ++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 477 ++++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index deba27ab7657..aee4b9715d2f 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 000000000000..82bb10e9a531
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+ model = "MediaTek MT8195 evaluation board";
+ compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 000000000000..356583fe4f03
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "mediatek,mt8195";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ clk26m: oscillator0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "clk32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78", "arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+ cpuoff_l: cpuoff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <95>;
+ min-residency-us = <580>;
+ };
+ cpuoff_b: cpuoff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <45>;
+ exit-latency-us = <140>;
+ min-residency-us = <740>;
+ };
+ clusteroff_l: clusteroff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <155>;
+ min-residency-us = <840>;
+ };
+ clusteroff_b: clusteroff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ dsu-pmu {
+ compatible = "arm,dsu-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a78 {
+ compatible = "arm,cortex-a78-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ };
+ };
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8195-timer", "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>;
+ };
+
+ uart0: serial@11001100 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001100 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11001200 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001200 0 0x100>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ };
+
+ uart2: serial@11001300 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001300 0 0x100>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11001400 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001400 0 0x100>;
+ interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart4: serial@11001500 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001500 0 0x100>;
+ interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart5: serial@11001600 {
+ compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001600 0 0x100>;
+ interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ auxadc: auxadc@11002000 {
+ compatible = "mediatek,mt8195-auxadc", "mediatek,mt8173-auxadc";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11230000 0 0x10000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ nor_flash: nor@1132c000 {
+ compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
+ reg = <0 0x1132c000 0 0x1000>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy2@11c40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c40000 0x700>;
+ status = "disabled";
+
+ u2port2: usb2-phy2@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy3: usb-phy3@11c50000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c50000 0x700>;
+ status = "disabled";
+
+ u2port3: usb2-phy3@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy1: usb-phy1@11e30000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e30000 0xe00>;
+ status = "disabled";
+
+ u2port1: usb2-phy1@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port1: usb3-phy1@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy0: usb-phy0@11e40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e40000 0xe00>;
+ status = "disabled";
+
+ u2port0: usb2-phy0@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ u3port0: usb3-phy0@700 {
+ reg = <0x700 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ ufsphy: phy@11fa0000 {
+ compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+ reg = <0 0x11fa0000 0 0xc000>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "unipro", "mp";
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.14.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-16 11:17 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 11:14 [PATCH 00/10] Add basic node support for Mediatek MT8195 SoC Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 01/10] dt-bindings: timer: Add compatible for Mediatek MT8195 Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 02/10] dt-bindings: serial: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 03/10] dt-bindings: watchdog: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 21:15 ` Guenter Roeck
2021-03-16 21:15 ` Guenter Roeck
2021-03-16 21:15 ` Guenter Roeck
2021-03-16 11:14 ` [PATCH 04/10] dt-bindings: mmc: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 05/10] dt-bindings: spi: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 06/10] dt-bindings: iio: adc: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 07/10] dt-bindings: phy: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-17 6:39 ` Vinod Koul
2021-03-17 6:39 ` Vinod Koul
2021-03-17 6:39 ` Vinod Koul
2021-03-16 11:14 ` [PATCH 08/10] " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-17 6:40 ` Vinod Koul
2021-03-17 6:40 ` Vinod Koul
2021-03-17 6:40 ` Vinod Koul
2021-03-18 2:33 ` Chunfeng Yun
2021-03-18 2:33 ` Chunfeng Yun
2021-03-18 2:33 ` Chunfeng Yun
2021-03-18 2:19 ` Chunfeng Yun
2021-03-18 2:19 ` Chunfeng Yun
2021-03-18 2:19 ` Chunfeng Yun
2021-03-18 6:04 ` Seiya Wang
2021-03-18 6:04 ` Seiya Wang
2021-03-18 6:04 ` Seiya Wang
2021-03-16 11:14 ` [PATCH 09/10] dt-bindings: arm: " Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-16 11:14 ` Seiya Wang [this message]
2021-03-16 11:14 ` [PATCH 10/10] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile Seiya Wang
2021-03-16 11:14 ` Seiya Wang
2021-03-18 2:57 ` Chunfeng Yun
2021-03-18 2:57 ` Chunfeng Yun
2021-03-18 2:57 ` Chunfeng Yun
2021-03-18 6:03 ` Seiya Wang
2021-03-18 6:03 ` Seiya Wang
2021-03-18 6:03 ` Seiya Wang
2021-03-16 17:59 ` (subset) [PATCH 00/10] Add basic node support for Mediatek MT8195 SoC Mark Brown
2021-03-16 17:59 ` Mark Brown
2021-03-16 17:59 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316111443.3332-11-seiya.wang@mediatek.com \
--to=seiya.wang@mediatek.com \
--cc=bayi.cheng@mediatek.com \
--cc=broonie@kernel.org \
--cc=chaotian.jing@mediatek.com \
--cc=chunfeng.yun@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=enric.balletbo@collabora.com \
--cc=fparent@baylibre.com \
--cc=gch981213@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hsinyi@chromium.org \
--cc=jic23@kernel.org \
--cc=kishon@ti.com \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=matthias.bgg@gmail.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=stanley.chu@mediatek.com \
--cc=tglx@linutronix.de \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
--cc=wenbin.mei@mediatek.com \
--cc=wim@linux-watchdog.org \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.