Re: [RFC PATCH v3 2/3] xfs: basic functionality test for shrinking free space in the last AG

From: Gao Xiang <hsiangkao@redhat.com>
To: Eryu Guan <guan@eryu.me>
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org,
	"Darrick J. Wong" <djwong@kernel.org>,
	Zorro Lang <zlang@redhat.com>
Subject: Re: [RFC PATCH v3 2/3] xfs: basic functionality test for shrinking free space in the last AG
Date: Mon, 29 Mar 2021 04:06:03 +0800	[thread overview]
Message-ID: <20210328200603.GB3213575@xiangao.remote.csb> (raw)
In-Reply-To: <YGCvp6QJherSSOGk@desktop>

On Mon, Mar 29, 2021 at 12:32:39AM +0800, Eryu Guan wrote:
> On Mon, Mar 15, 2021 at 07:19:25PM +0800, Gao Xiang wrote:
> > Add basic test to make sure the functionality works as expected.
> > 
> > Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
> > ---
> >  tests/xfs/990     | 70 +++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/990.out | 12 ++++++++
> >  tests/xfs/group   |  1 +
> >  3 files changed, 83 insertions(+)
> >  create mode 100755 tests/xfs/990
> >  create mode 100644 tests/xfs/990.out
> > 
> > diff --git a/tests/xfs/990 b/tests/xfs/990
> > new file mode 100755
> > index 00000000..3c79186e
> > --- /dev/null
> > +++ b/tests/xfs/990
> > @@ -0,0 +1,70 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2021 Red Hat, Inc.  All Rights Reserved.
> > +#
> > +# FS QA Test 990
> > +#
> > +# XFS shrinkfs basic functionality test
> > +#
> > +# This test attempts to shrink with a small size (512K), half AG size and
> > +# an out-of-bound size (agsize + 1) to observe if it works as expected.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +test_shrink()
> > +{
> > +	$XFS_GROWFS_PROG -D"$1" $SCRATCH_MNT >> $seqres.full 2>&1
> > +	ret=$?
> 
> I'm not sure what's the output of xfs_growfs when shrinking filesystem,
> if it's easy to do filter, but it'd be good if we could just dump the
> output and let .out file match & check the test result.

Not quite sure if it's of some use (e.g. also need to update expected output
when output changed), since I think just make sure the shrinked size is as
expected and xfs_repair won't argue anything on the new size, that would be
enough.

> 
> > +
> > +	_scratch_unmount
> > +	_repair_scratch_fs >> $seqres.full
> 
> _repair_scratch_fs will fix corruption if there's any, and always return 0 if
> completes without problems. Is _check_scratch_fs() what you want?

I didn't notice this, will update.

> 
> > +	_scratch_mount >> $seqres.full
> > +
> > +	$XFS_INFO_PROG $SCRATCH_MNT 2>&1 | _filter_mkfs 2>$tmp.growfs >/dev/null
> > +	. $tmp.growfs
> > +	[ $ret -eq 0 -a $1 -eq $dblocks ]
> 
> Just dump the expected size after shrink if possible.

er... my idea is that I don't want to continue the test case
if any fails... if dump the expected size to output, I need to
fix blocksize as well, not sure if it's necessary.

> 
> > +}
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> 
> Still missing _require_scratch

No, _require_xfs_shrink will include that, just as _require_xfs_scratch_rmapbt.

> 
> > +_require_xfs_shrink
> > +
> > +rm -f $seqres.full
> > +echo "Format and mount"
> > +_scratch_mkfs -dsize="$((512 * 1024 * 1024))" -dagcount=3 2>&1 | \
> > +	tee -a $seqres.full | _filter_mkfs 2>$tmp.mkfs
> 
> Better to explain why mkfs with agcount=3

just because agcount = 1 is forbidden on purpose, and I need to make sure
shrinking to 2 AG is not possible yet. So agcount = 3 is the minimum number.

It's just a functionality test, so agcount = 3 also makes the result
determinatively.

> 
> > +. $tmp.mkfs
> > +t_dblocks=$dblocks
> > +_scratch_mount >> $seqres.full
> > +
> > +echo "Shrink fs (small size)"
> > +test_shrink $((t_dblocks-512*1024/dbsize)) || \
> > +	_fail "Shrink fs (small size) failure"
> 
> If it's possible to turn test_shrink to .out file matching way, _fail is
> not needed and below.

The same as above. I could try to fix blocksize if the opinion is strong.

> 
> > +
> > +echo "Shrink fs (half AG)"
> > +test_shrink $((t_dblocks-agsize/2)) || \
> > +	_fail "Shrink fs (half AG) failure"
> > +
> > +echo "Shrink fs (out-of-bound)"
> > +test_shrink $((t_dblocks-agsize-1)) && \
> > +	_fail "Shrink fs (out-of-bound) failure"
> > +[ $dblocks -ne $((t_dblocks-agsize/2)) ] && \
> > +	_fail "dblocks changed after shrinking failure"
> > +
> > +$XFS_INFO_PROG $SCRATCH_MNT >> $seqres.full
> > +echo "*** done"
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/990.out b/tests/xfs/990.out
> > new file mode 100644
> > index 00000000..812f89ef
> > --- /dev/null
> > +++ b/tests/xfs/990.out
> > @@ -0,0 +1,12 @@
> > +QA output created by 990
> > +Format and mount
> > +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> > +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> > +         = sunit=XXX swidth=XXX, unwritten=X
> > +naming   =VERN bsize=XXX
> > +log      =LDEV bsize=XXX blocks=XXX
> > +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > +Shrink fs (small size)
> > +Shrink fs (half AG)
> > +Shrink fs (out-of-bound)
> > +*** done
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index e861cec9..a7981b67 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -525,3 +525,4 @@
> >  525 auto quick mkfs
> >  526 auto quick mkfs
> >  527 auto quick quota
> > +990 auto quick growfs
> 
> Maybe it's time to add a new 'shrinkfs' group?

not sure if it needs, since shrinkfs reuses growfs ioctl.

Thanks,
Gao Xiang

> 
> Thanks,
> Eryu
> 