Re: [PATCH V3 6/8] remoteproc: imx_rproc: initial support for mutilple start/stop method

From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@oss.nxp.com
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
	o.rempel@pengutronix.de, robh+dt@kernel.org,
	devicetree@vger.kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V3 6/8] remoteproc: imx_rproc: initial support for mutilple start/stop method
Date: Tue, 13 Apr 2021 11:45:45 -0600	[thread overview]
Message-ID: <20210413174545.GD750651@xps15> (raw)
In-Reply-To: <1617846898-13662-7-git-send-email-peng.fan@oss.nxp.com>

On Thu, Apr 08, 2021 at 09:54:56AM +0800, peng.fan@oss.nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add three methods IMX_RPROC_NONE(no need start/stop), IMX_RPROC_MMIO
> (start/stop through mmio) and IMX_RPROC_SMC(start/stop through ARM SMCCC).
> 
> The current SoCs supported are all using IMX_RPROC_MMIO, add a restrict
> in probe that only SoCs using IMX_RPROC_MMIO needs syscon regmap to
> access registers.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 50 +++++++++++++++++++++++-----------
>  1 file changed, 34 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index c576e12d3817..a7fa9d7fc2d1 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -74,6 +74,15 @@ struct imx_rproc_att {
>  	int flags;
>  };
>  
> +/* Remote core start/stop method */
> +enum imx_rproc_method {
> +	IMX_RPROC_NONE,
> +	/* Through syscon regmap */
> +	IMX_RPROC_MMIO,
> +	/* Through ARM SMCCC */
> +	IMX_RPROC_SMC,
> +};
> +
>  struct imx_rproc_dcfg {
>  	u32				src_reg;
>  	u32				src_mask;
> @@ -81,6 +90,7 @@ struct imx_rproc_dcfg {
>  	u32				src_stop;
>  	const struct imx_rproc_att	*att;
>  	size_t				att_size;
> +	enum imx_rproc_method		method;
>  };
>  
>  enum imx_rproc_mode {
> @@ -194,6 +204,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
>  	.src_stop	= IMX7D_M4_STOP,
>  	.att		= imx_rproc_att_imx8mq,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mq),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
> @@ -203,6 +214,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_stop	= IMX7D_M4_STOP,
>  	.att		= imx_rproc_att_imx7d,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7d),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
> @@ -212,6 +224,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
>  	.src_stop	= IMX6SX_M4_STOP,
>  	.att		= imx_rproc_att_imx6sx,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx6sx),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static int imx_rproc_start(struct rproc *rproc)
> @@ -578,15 +591,17 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  
>  	priv->mode = IMX_RPROC_NORMAL;
>  
> -	ret = regmap_read(priv->regmap, dcfg->src_reg, &val);
> -	if (ret) {
> -		dev_err(dev, "Failed to read src\n");
> -		return ret;
> -	}
> +	if (priv->regmap) {
> +		ret = regmap_read(priv->regmap, dcfg->src_reg, &val);
> +		if (ret) {
> +			dev_err(dev, "Failed to read src\n");
> +			return ret;
> +		}
>  
> -	if (!(val & dcfg->src_stop)) {
> -		priv->mode = IMX_RPROC_EARLY_BOOT;
> -		priv->rproc->state = RPROC_DETACHED;
> +		if (!(val & dcfg->src_stop)) {
> +			priv->rproc->state = RPROC_DETACHED;
> +			priv->mode = IMX_RPROC_EARLY_BOOT;
> +		}
>  	}
>  
>  	return 0;
> @@ -600,16 +615,9 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	struct rproc *rproc;
>  	struct regmap_config config = { .name = "imx-rproc" };
>  	const struct imx_rproc_dcfg *dcfg;
> -	struct regmap *regmap;
> +	struct regmap *regmap = NULL;
>  	int ret;
>  
> -	regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> -	if (IS_ERR(regmap)) {
> -		dev_err(dev, "failed to find syscon\n");
> -		return PTR_ERR(regmap);
> -	}
> -	regmap_attach_dev(dev, regmap, &config);
> -
>  	/* set some other name then imx */
>  	rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
>  			    NULL, sizeof(*priv));
> @@ -622,6 +630,16 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  		goto err_put_rproc;
>  	}
>  
> +	if (dcfg->method == IMX_RPROC_MMIO) {
> +		regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> +		if (IS_ERR(regmap)) {
> +			dev_err(dev, "failed to find syscon\n");
> +			ret = PTR_ERR(regmap);
> +			goto err_put_rproc;
> +		}
> +		regmap_attach_dev(dev, regmap, &config);
> +	}

I would move this to imx_rproc_detect_mode() and get rid of the "if
(priv->regmap)" that is there.

> +
>  	priv = rproc->priv;
>  	priv->rproc = rproc;
>  	priv->regmap = regmap;
> -- 
> 2.30.0
> 