All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH v3 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip()
Date: Thu, 15 Apr 2021 10:53:18 +0200	[thread overview]
Message-ID: <20210415085326.8824-2-tzimmermann@suse.de> (raw)
In-Reply-To: <20210415085326.8824-1-tzimmermann@suse.de>

The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/drm_format_helper.c    | 9 +++++----
 drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
 drivers/gpu/drm/tiny/cirrus.c          | 2 +-
 include/drm/drm_format_helper.h        | 2 +-
 4 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index c043ca364c86..8d5a683afea7 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(drm_fb_memcpy);
 /**
  * drm_fb_memcpy_dstclip - Copy clip buffer
  * @dst: Destination buffer (iomem)
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
  * @vaddr: Source buffer
  * @fb: DRM framebuffer
  * @clip: Clip rectangle area to copy
@@ -59,12 +60,12 @@ EXPORT_SYMBOL(drm_fb_memcpy);
  * This function applies clipping on dst, i.e. the destination is a
  * full (iomem) framebuffer but only the clip rect content is copied over.
  */
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
-			   struct drm_framebuffer *fb,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch,
+			   void *vaddr, struct drm_framebuffer *fb,
 			   struct drm_rect *clip)
 {
 	unsigned int cpp = fb->format->cpp[0];
-	unsigned int offset = clip_offset(clip, fb->pitches[0], cpp);
+	unsigned int offset = clip_offset(clip, dst_pitch, cpp);
 	size_t len = (clip->x2 - clip->x1) * cpp;
 	unsigned int y, lines = clip->y2 - clip->y1;
 
@@ -73,7 +74,7 @@ void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
 	for (y = 0; y < lines; y++) {
 		memcpy_toio(dst, vaddr, len);
 		vaddr += fb->pitches[0];
-		dst += fb->pitches[0];
+		dst += dst_pitch;
 	}
 }
 EXPORT_SYMBOL(drm_fb_memcpy_dstclip);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index cece3e57fb27..9d576240faed 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1554,7 +1554,7 @@ mgag200_handle_damage(struct mga_device *mdev, struct drm_framebuffer *fb,
 {
 	void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
 
-	drm_fb_memcpy_dstclip(mdev->vram, vmap, fb, clip);
+	drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip);
 
 	/* Always scanout image at VRAM offset 0 */
 	mgag200_set_startadd(mdev, (u32)0);
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index e3afb45d9a5c..42611dacde88 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -324,7 +324,7 @@ static int cirrus_fb_blit_rect(struct drm_framebuffer *fb, const struct dma_buf_
 		return -ENODEV;
 
 	if (cirrus->cpp == fb->format->cpp[0])
-		drm_fb_memcpy_dstclip(cirrus->vram,
+		drm_fb_memcpy_dstclip(cirrus->vram, fb->pitches[0],
 				      vmap, fb, rect);
 
 	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 5f9e37032468..2b5036a5fbe7 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -11,7 +11,7 @@ struct drm_rect;
 
 void drm_fb_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
 		   struct drm_rect *clip);
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch, void *vaddr,
 			   struct drm_framebuffer *fb,
 			   struct drm_rect *clip);
 void drm_fb_swab(void *dst, void *src, struct drm_framebuffer *fb,
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org
Subject: [PATCH v3 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip()
Date: Thu, 15 Apr 2021 10:53:18 +0200	[thread overview]
Message-ID: <20210415085326.8824-2-tzimmermann@suse.de> (raw)
In-Reply-To: <20210415085326.8824-1-tzimmermann@suse.de>

The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/drm_format_helper.c    | 9 +++++----
 drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
 drivers/gpu/drm/tiny/cirrus.c          | 2 +-
 include/drm/drm_format_helper.h        | 2 +-
 4 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index c043ca364c86..8d5a683afea7 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(drm_fb_memcpy);
 /**
  * drm_fb_memcpy_dstclip - Copy clip buffer
  * @dst: Destination buffer (iomem)
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
  * @vaddr: Source buffer
  * @fb: DRM framebuffer
  * @clip: Clip rectangle area to copy
@@ -59,12 +60,12 @@ EXPORT_SYMBOL(drm_fb_memcpy);
  * This function applies clipping on dst, i.e. the destination is a
  * full (iomem) framebuffer but only the clip rect content is copied over.
  */
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
-			   struct drm_framebuffer *fb,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch,
+			   void *vaddr, struct drm_framebuffer *fb,
 			   struct drm_rect *clip)
 {
 	unsigned int cpp = fb->format->cpp[0];
-	unsigned int offset = clip_offset(clip, fb->pitches[0], cpp);
+	unsigned int offset = clip_offset(clip, dst_pitch, cpp);
 	size_t len = (clip->x2 - clip->x1) * cpp;
 	unsigned int y, lines = clip->y2 - clip->y1;
 
@@ -73,7 +74,7 @@ void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
 	for (y = 0; y < lines; y++) {
 		memcpy_toio(dst, vaddr, len);
 		vaddr += fb->pitches[0];
-		dst += fb->pitches[0];
+		dst += dst_pitch;
 	}
 }
 EXPORT_SYMBOL(drm_fb_memcpy_dstclip);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index cece3e57fb27..9d576240faed 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1554,7 +1554,7 @@ mgag200_handle_damage(struct mga_device *mdev, struct drm_framebuffer *fb,
 {
 	void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
 
-	drm_fb_memcpy_dstclip(mdev->vram, vmap, fb, clip);
+	drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip);
 
 	/* Always scanout image at VRAM offset 0 */
 	mgag200_set_startadd(mdev, (u32)0);
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index e3afb45d9a5c..42611dacde88 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -324,7 +324,7 @@ static int cirrus_fb_blit_rect(struct drm_framebuffer *fb, const struct dma_buf_
 		return -ENODEV;
 
 	if (cirrus->cpp == fb->format->cpp[0])
-		drm_fb_memcpy_dstclip(cirrus->vram,
+		drm_fb_memcpy_dstclip(cirrus->vram, fb->pitches[0],
 				      vmap, fb, rect);
 
 	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 5f9e37032468..2b5036a5fbe7 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -11,7 +11,7 @@ struct drm_rect;
 
 void drm_fb_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
 		   struct drm_rect *clip);
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch, void *vaddr,
 			   struct drm_framebuffer *fb,
 			   struct drm_rect *clip);
 void drm_fb_swab(void *dst, void *src, struct drm_framebuffer *fb,
-- 
2.31.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

WARNING: multiple messages have this Message-ID (diff)
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org
Subject: [PATCH v3 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip()
Date: Thu, 15 Apr 2021 10:53:18 +0200	[thread overview]
Message-ID: <20210415085326.8824-2-tzimmermann@suse.de> (raw)
In-Reply-To: <20210415085326.8824-1-tzimmermann@suse.de>

The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/drm_format_helper.c    | 9 +++++----
 drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
 drivers/gpu/drm/tiny/cirrus.c          | 2 +-
 include/drm/drm_format_helper.h        | 2 +-
 4 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index c043ca364c86..8d5a683afea7 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(drm_fb_memcpy);
 /**
  * drm_fb_memcpy_dstclip - Copy clip buffer
  * @dst: Destination buffer (iomem)
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
  * @vaddr: Source buffer
  * @fb: DRM framebuffer
  * @clip: Clip rectangle area to copy
@@ -59,12 +60,12 @@ EXPORT_SYMBOL(drm_fb_memcpy);
  * This function applies clipping on dst, i.e. the destination is a
  * full (iomem) framebuffer but only the clip rect content is copied over.
  */
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
-			   struct drm_framebuffer *fb,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch,
+			   void *vaddr, struct drm_framebuffer *fb,
 			   struct drm_rect *clip)
 {
 	unsigned int cpp = fb->format->cpp[0];
-	unsigned int offset = clip_offset(clip, fb->pitches[0], cpp);
+	unsigned int offset = clip_offset(clip, dst_pitch, cpp);
 	size_t len = (clip->x2 - clip->x1) * cpp;
 	unsigned int y, lines = clip->y2 - clip->y1;
 
@@ -73,7 +74,7 @@ void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
 	for (y = 0; y < lines; y++) {
 		memcpy_toio(dst, vaddr, len);
 		vaddr += fb->pitches[0];
-		dst += fb->pitches[0];
+		dst += dst_pitch;
 	}
 }
 EXPORT_SYMBOL(drm_fb_memcpy_dstclip);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index cece3e57fb27..9d576240faed 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1554,7 +1554,7 @@ mgag200_handle_damage(struct mga_device *mdev, struct drm_framebuffer *fb,
 {
 	void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
 
-	drm_fb_memcpy_dstclip(mdev->vram, vmap, fb, clip);
+	drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip);
 
 	/* Always scanout image at VRAM offset 0 */
 	mgag200_set_startadd(mdev, (u32)0);
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index e3afb45d9a5c..42611dacde88 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -324,7 +324,7 @@ static int cirrus_fb_blit_rect(struct drm_framebuffer *fb, const struct dma_buf_
 		return -ENODEV;
 
 	if (cirrus->cpp == fb->format->cpp[0])
-		drm_fb_memcpy_dstclip(cirrus->vram,
+		drm_fb_memcpy_dstclip(cirrus->vram, fb->pitches[0],
 				      vmap, fb, rect);
 
 	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 5f9e37032468..2b5036a5fbe7 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -11,7 +11,7 @@ struct drm_rect;
 
 void drm_fb_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
 		   struct drm_rect *clip);
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch, void *vaddr,
 			   struct drm_framebuffer *fb,
 			   struct drm_rect *clip);
 void drm_fb_swab(void *dst, void *src, struct drm_framebuffer *fb,
-- 
2.31.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2021-04-15  8:53 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15  8:53 [PATCH v3 0/9] drm: Support simple-framebuffer devices and firmware fbs Thomas Zimmermann
2021-04-15  8:53 ` Thomas Zimmermann
2021-04-15  8:53 ` Thomas Zimmermann
2021-04-15  8:53 ` Thomas Zimmermann [this message]
2021-04-15  8:53   ` [PATCH v3 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip() Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 2/9] drm/format-helper: Add blitter functions Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 3/9] drm/aperture: Add infrastructure for aperture ownership Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 4/9] drm: Add simpledrm driver Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 5/9] drm/simpledrm: Add fbdev emulation Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 6/9] drm/simpledrm: Initialize framebuffer data from device-tree node Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 7/9] drm/simpledrm: Acquire clocks from DT device node Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 8/9] drm/simpledrm: Acquire regulators " Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53 ` [PATCH v3 9/9] drm/simpledrm: Acquire memory aperture for framebuffer Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann
2021-04-15  8:53   ` Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210415085326.8824-2-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@linux.ie \
    --cc=bluescreen_avenger@verizon.net \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.