All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Fugang Duan <fugang.duan@nxp.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-imx@nxp.com,
	Fabio Estevam <festevam@gmail.com>,
	David Jander <david@protonic.nl>,
	Russell King <linux@armlinux.org.uk>,
	Philippe Schenker <philippe.schenker@toradex.com>
Subject: [PATCH net-next v3 0/6] provide generic net selftest support
Date: Mon, 19 Apr 2021 15:01:00 +0200	[thread overview]
Message-ID: <20210419130106.6707-1-o.rempel@pengutronix.de> (raw)

changes v3:
- make more granular tests
- enable loopback for all PHYs by default
- fix allmodconfig build errors
- poll for link status update after switching to the loopback mode

changes v2:
- make generic selftests available for all networking devices.
- make use of net_selftest* on FEC, ag71xx and all DSA switches.
- add loopback support on more PHYs.

This patch set provides diagnostic capabilities for some iMX, ag71xx or
any DSA based devices. For proper functionality, PHY loopback support is
needed.
So far there is only initial infrastructure with basic tests. 

Oleksij Rempel (6):
  net: phy: execute genphy_loopback() per default on all PHYs
  net: phy: genphy_loopback: add link speed configuration
  net: add generic selftest support
  net: fec: make use of generic NET_SELFTESTS library
  net: ag71xx: make use of generic NET_SELFTESTS library
  net: dsa: enable selftest support for all switches by default

 drivers/net/ethernet/atheros/Kconfig      |   1 +
 drivers/net/ethernet/atheros/ag71xx.c     |  20 +-
 drivers/net/ethernet/freescale/Kconfig    |   1 +
 drivers/net/ethernet/freescale/fec_main.c |   7 +
 drivers/net/phy/phy.c                     |   3 +-
 drivers/net/phy/phy_device.c              |  35 +-
 include/linux/phy.h                       |   1 +
 include/net/dsa.h                         |   2 +
 include/net/selftests.h                   |  12 +
 net/Kconfig                               |   4 +
 net/core/Makefile                         |   1 +
 net/core/selftests.c                      | 400 ++++++++++++++++++++++
 net/dsa/Kconfig                           |   1 +
 net/dsa/slave.c                           |  21 ++
 14 files changed, 500 insertions(+), 9 deletions(-)
 create mode 100644 include/net/selftests.h
 create mode 100644 net/core/selftests.c

-- 
2.29.2


WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Fugang Duan <fugang.duan@nxp.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-imx@nxp.com,
	Fabio Estevam <festevam@gmail.com>,
	David Jander <david@protonic.nl>,
	Russell King <linux@armlinux.org.uk>,
	Philippe Schenker <philippe.schenker@toradex.com>
Subject: [PATCH net-next v3 0/6] provide generic net selftest support
Date: Mon, 19 Apr 2021 15:01:00 +0200	[thread overview]
Message-ID: <20210419130106.6707-1-o.rempel@pengutronix.de> (raw)

changes v3:
- make more granular tests
- enable loopback for all PHYs by default
- fix allmodconfig build errors
- poll for link status update after switching to the loopback mode

changes v2:
- make generic selftests available for all networking devices.
- make use of net_selftest* on FEC, ag71xx and all DSA switches.
- add loopback support on more PHYs.

This patch set provides diagnostic capabilities for some iMX, ag71xx or
any DSA based devices. For proper functionality, PHY loopback support is
needed.
So far there is only initial infrastructure with basic tests. 

Oleksij Rempel (6):
  net: phy: execute genphy_loopback() per default on all PHYs
  net: phy: genphy_loopback: add link speed configuration
  net: add generic selftest support
  net: fec: make use of generic NET_SELFTESTS library
  net: ag71xx: make use of generic NET_SELFTESTS library
  net: dsa: enable selftest support for all switches by default

 drivers/net/ethernet/atheros/Kconfig      |   1 +
 drivers/net/ethernet/atheros/ag71xx.c     |  20 +-
 drivers/net/ethernet/freescale/Kconfig    |   1 +
 drivers/net/ethernet/freescale/fec_main.c |   7 +
 drivers/net/phy/phy.c                     |   3 +-
 drivers/net/phy/phy_device.c              |  35 +-
 include/linux/phy.h                       |   1 +
 include/net/dsa.h                         |   2 +
 include/net/selftests.h                   |  12 +
 net/Kconfig                               |   4 +
 net/core/Makefile                         |   1 +
 net/core/selftests.c                      | 400 ++++++++++++++++++++++
 net/dsa/Kconfig                           |   1 +
 net/dsa/slave.c                           |  21 ++
 14 files changed, 500 insertions(+), 9 deletions(-)
 create mode 100644 include/net/selftests.h
 create mode 100644 net/core/selftests.c

-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-04-19 13:01 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-19 13:01 Oleksij Rempel [this message]
2021-04-19 13:01 ` [PATCH net-next v3 0/6] provide generic net selftest support Oleksij Rempel
2021-04-19 13:01 ` [PATCH net-next v3 1/6] net: phy: execute genphy_loopback() per default on all PHYs Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-19 13:01 ` [PATCH net-next v3 2/6] net: phy: genphy_loopback: add link speed configuration Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-19 13:01 ` [PATCH net-next v3 3/6] net: add generic selftest support Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-30  6:45   ` Geert Uytterhoeven
2021-04-30  6:45     ` Geert Uytterhoeven
2021-04-30  7:26     ` Oleksij Rempel
2021-04-30  7:26       ` Oleksij Rempel
2021-04-30  7:49       ` Geert Uytterhoeven
2021-04-30  7:49         ` Geert Uytterhoeven
2021-04-30 12:31     ` Andrew Lunn
2021-04-30 12:31       ` Andrew Lunn
2021-04-19 13:01 ` [PATCH net-next v3 4/6] net: fec: make use of generic NET_SELFTESTS library Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-19 13:01 ` [PATCH net-next v3 5/6] net: ag71xx: " Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-19 13:01 ` [PATCH net-next v3 6/6] net: dsa: enable selftest support for all switches by default Oleksij Rempel
2021-04-19 13:01   ` Oleksij Rempel
2021-04-23  3:18 ` [PATCH net-next v3 0/6] provide generic net selftest support Joakim Zhang
2021-04-23  3:18   ` Joakim Zhang
2021-04-23  4:37   ` Oleksij Rempel
2021-04-23  4:37     ` Oleksij Rempel
2021-04-27  4:48     ` Joakim Zhang
2021-04-27  4:48       ` Joakim Zhang
2021-04-27  7:15       ` Oleksij Rempel
2021-04-27  7:15         ` Oleksij Rempel
2021-04-27 16:40       ` Florian Fainelli
2021-04-27 16:40         ` Florian Fainelli
2021-04-28  8:06         ` Joakim Zhang
2021-04-28  8:06           ` Joakim Zhang
2021-04-28  8:51           ` Oleksij Rempel
2021-04-28  8:51             ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210419130106.6707-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=david@protonic.nl \
    --cc=f.fainelli@gmail.com \
    --cc=festevam@gmail.com \
    --cc=fugang.duan@nxp.com \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.