From: Aswath Govindraju <a-govindraju@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Praneeth Bajjuri <praneeth@ti.com>,
Aswath Govindraju <a-govindraju@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
Suman Anna <s-anna@ti.com>, Keerthy <j-keerthy@ti.com>,
<u-boot@lists.denx.de>
Subject: [PATCH v3 10/10] configs: am64: Enable configs to support USB host and device modes
Date: Fri, 4 Jun 2021 22:00:40 +0530 [thread overview]
Message-ID: <20210604163043.12811-11-a-govindraju@ti.com> (raw)
In-Reply-To: <20210604163043.12811-1-a-govindraju@ti.com>
Enable config options required to add support for USB Mass storage boot,
USB DFU boot, host and device modes in U-Boot.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
configs/am64x_evm_a53_defconfig | 39 +++++++++++++++++++++++++++++++++
configs/am64x_evm_r5_defconfig | 36 ++++++++++++++++++++++++++++--
include/configs/am64x_evm.h | 12 +++++++++-
3 files changed, 84 insertions(+), 3 deletions(-)
diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig
index 3b8b7474f845..a3aab807c6e7 100644
--- a/configs/am64x_evm_a53_defconfig
+++ b/configs/am64x_evm_a53_defconfig
@@ -23,6 +23,7 @@ CONFIG_DEFAULT_DEVICE_TREE="k3-am642-evm"
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
@@ -30,12 +31,17 @@ CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_I2C=y
@@ -103,3 +109,36 @@ CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_USB=y
+CONFIG_DFU=y
+CONFIG_DFU_OVER_USB=y
+# CONFIG_DFU_TFTP is not set
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+# CONFIG_DFU_VIRT is not set
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_HOST=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_SPL_USB_CDNS3_HOST=y
+CONFIG_USB_CDNS3_TI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig
index de0c814222c0..3e9b5650c60d 100644
--- a/configs/am64x_evm_r5_defconfig
+++ b/configs/am64x_evm_r5_defconfig
@@ -23,6 +23,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am642-r5-evm"
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
@@ -31,19 +32,30 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_REMOTEPROC=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
+CONFIG_CMD_DFU=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_FAT=y
@@ -52,8 +64,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_OF_LIST="k3-am642-r5-evm k3-am642-r5-sk"
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM=y
CONFIG_SPL_DM=y
@@ -64,6 +74,10 @@ CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
@@ -101,4 +115,22 @@ CONFIG_CADENCE_QSPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_SPL_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_SPL_USB_CDNS3_HOST=y
+CONFIG_USB_CDNS3_TI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
+CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
index 7c9bdc2d7d3a..c2c2bf06777c 100644
--- a/include/configs/am64x_evm.h
+++ b/include/configs/am64x_evm.h
@@ -13,6 +13,7 @@
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
#include <asm/arch/am64_hardware.h>
+#include <environment/ti/k3_dfu.h>
/* DDR Configuration */
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
@@ -95,16 +96,25 @@
"${bootdir}/${name_fit}\0" \
"partitions=" PARTS_DEFAULT
+#define EXTRA_ENV_DFUARGS \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_EMMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_OSPI
+
/* Incorporate settings into the U-Boot environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
EXTRA_ENV_AM642_BOARD_SETTINGS \
- EXTRA_ENV_AM642_BOARD_SETTINGS_MMC
+ EXTRA_ENV_AM642_BOARD_SETTINGS_MMC \
+ EXTRA_ENV_DFUARGS
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>
+#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
+
/* MMC ENV related defines */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
--
2.17.1
next prev parent reply other threads:[~2021-06-04 16:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 16:30 [PATCH v3 00/10] AM642-EVM: Add USB support Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 02/10] arm: mach-k3: am642_init: Add support for USB boot mode Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 05/10] arm: dts: k3-am64-main: Add USB DT nodes Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 06/10] arm: dts: k3-am642-*-evm: Add USB support Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 08/10] configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase its max size Aswath Govindraju
2021-06-04 16:30 ` Aswath Govindraju [this message]
2021-06-04 16:48 ` [PATCH v3 00/10] AM642-EVM: Add USB support Praneeth Bajjuri
2021-06-04 16:49 ` Aswath Govindraju
2021-06-04 16:53 ` Praneeth Bajjuri
2021-06-07 4:16 ` Praneeth Bajjuri
2021-06-09 12:30 ` Aswath Govindraju
2021-06-09 16:55 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210604163043.12811-11-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=d-gerlach@ti.com \
--cc=j-keerthy@ti.com \
--cc=kishon@ti.com \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=s-anna@ti.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.