From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Andy Gross <agross@kernel.org>
Subject: [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas
Date: Tue, 15 Jun 2021 13:15:38 +0530 [thread overview]
Message-ID: <20210615074543.26700-6-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210615074543.26700-1-bhupesh.sharma@linaro.org>
Cleanup the qcom-rpmh regulator driver:
- remove comma(s) at the end of the terminator line.
- add missing terminator in instances of
pm7325x_vreg_data[] arrays.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 26 +++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 22fec370fa61..af41a517da99 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"),
RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"),
RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
@@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"),
RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
@@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l13-l16-l17"),
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l13-l16-l17"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
@@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
@@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
@@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l1-l12"),
RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
@@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l7"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
@@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
@@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
@@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
@@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14"),
RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"),
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l16"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
@@ -1070,6 +1070,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ {}
};
static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
@@ -1083,6 +1084,7 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-bob"),
+ {}
};
static int rpmh_regulator_probe(struct platform_device *pdev)
--
2.31.1
next prev parent reply other threads:[~2021-06-15 7:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 7:45 [PATCH v2 00/10] arm64: dts: qcom: Add SA8155p-adp board DTS Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 01/10] dt-bindings: qcom: rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-24 20:47 ` Rob Herring
2021-06-15 7:45 ` [PATCH v2 02/10] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for SA8155p-adp Bhupesh Sharma
2021-06-15 21:00 ` Bjorn Andersson
2021-06-16 6:26 ` Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 03/10] dt-bindings: arm: qcom: Add compatible for sm8150-mtp board Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 04/10] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board Bhupesh Sharma
2021-06-15 7:45 ` Bhupesh Sharma [this message]
2021-06-15 21:06 ` [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 06/10] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bhupesh Sharma
2021-06-15 11:12 ` Mark Brown
2021-06-15 14:38 ` Bhupesh Sharma
2021-06-15 15:35 ` Mark Brown
2021-06-15 21:10 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 07/10] pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adp Bhupesh Sharma
2021-06-15 21:07 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 08/10] arm64: dts: qcom: pmm8155au_1: Add base dts file Bhupesh Sharma
2021-06-15 21:08 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 09/10] arm64: dts: qcom: pmm8155au_2: " Bhupesh Sharma
2021-06-15 21:09 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: " Bhupesh Sharma
2021-06-15 14:53 ` Konrad Dybcio
2021-06-15 17:00 ` Bhupesh Sharma
2021-06-15 21:13 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615074543.26700-6-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.