From: Martin Kepplinger <martin.kepplinger@puri.sm> To: martin.kepplinger@puri.sm, festevam@gmail.com, krzk@kernel.org, laurent.pinchart@ideasonboard.com Cc: devicetree@vger.kernel.org, kernel@pengutronix.de, kernel@puri.sm, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, m.felsch@pengutronix.de, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, shawnguo@kernel.org, slongerbeam@gmail.com Subject: [PATCH v6 0/3] media: imx: add support for imx8mq MIPI RX Date: Wed, 14 Jul 2021 13:19:28 +0200 [thread overview] Message-ID: <20210714111931.324485-1-martin.kepplinger@puri.sm> (raw) hi, This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller. It includes the driver, the dt-bindings and the DT addition to the SoC dtsi. I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for any feedback, martin revision history ---------------- v6: (thank you Laurent and Rob) * add reviewed-by tag to binding * statically allocate clk_bulk_data * fix how the hs_settle value is applied * remove s_power calls * remove the link_setup() callback implementation and make the link immutable * more cleanups according to Laurents' review from v5 v5: (thank you Laurent) * fix reset usage by using the already supported reset controller driver * remove clko2 (totally unrelated clock / had been included by accident) * rename pxl clock to ui https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/ v4: (thank you Rob and Marco) * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy" * add imx8mq-specific compatibile to imx8mq.dtsi for future use https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/ v3: (thank you, Rob and Laurent) among minor other things according to v2 review, changes include: * better describe the clocks * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy" https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t v2: (thank you, Dan and Guido) among fixes according to v1 reviews, changes include: * remove status property from dt-bindings example * define a few bits in order to have less magic values * use "imx8mq_mipi_csi_" as local function prefix * read DT properties only during probe() * remove dead code (log_status) * add imx8mq_mipi_csi_release_icc() * fix imx8mq_mipi_csi_init_icc() https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/ v1: https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t Martin Kepplinger (3): dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 173 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++ drivers/staging/media/imx/Makefile | 1 + drivers/staging/media/imx/imx8mq-mipi-csi2.c | 949 ++++++++++++++++++ 4 files changed, 1227 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: martin.kepplinger@puri.sm, festevam@gmail.com, krzk@kernel.org, laurent.pinchart@ideasonboard.com Cc: devicetree@vger.kernel.org, kernel@pengutronix.de, kernel@puri.sm, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, m.felsch@pengutronix.de, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, shawnguo@kernel.org, slongerbeam@gmail.com Subject: [PATCH v6 0/3] media: imx: add support for imx8mq MIPI RX Date: Wed, 14 Jul 2021 13:19:28 +0200 [thread overview] Message-ID: <20210714111931.324485-1-martin.kepplinger@puri.sm> (raw) hi, This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller. It includes the driver, the dt-bindings and the DT addition to the SoC dtsi. I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for any feedback, martin revision history ---------------- v6: (thank you Laurent and Rob) * add reviewed-by tag to binding * statically allocate clk_bulk_data * fix how the hs_settle value is applied * remove s_power calls * remove the link_setup() callback implementation and make the link immutable * more cleanups according to Laurents' review from v5 v5: (thank you Laurent) * fix reset usage by using the already supported reset controller driver * remove clko2 (totally unrelated clock / had been included by accident) * rename pxl clock to ui https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/ v4: (thank you Rob and Marco) * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy" * add imx8mq-specific compatibile to imx8mq.dtsi for future use https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/ v3: (thank you, Rob and Laurent) among minor other things according to v2 review, changes include: * better describe the clocks * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy" https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t v2: (thank you, Dan and Guido) among fixes according to v1 reviews, changes include: * remove status property from dt-bindings example * define a few bits in order to have less magic values * use "imx8mq_mipi_csi_" as local function prefix * read DT properties only during probe() * remove dead code (log_status) * add imx8mq_mipi_csi_release_icc() * fix imx8mq_mipi_csi_init_icc() https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/ v1: https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t Martin Kepplinger (3): dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 173 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++ drivers/staging/media/imx/Makefile | 1 + drivers/staging/media/imx/imx8mq-mipi-csi2.c | 949 ++++++++++++++++++ 4 files changed, 1227 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-14 11:19 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-14 11:19 Martin Kepplinger [this message] 2021-07-14 11:19 ` [PATCH v6 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger 2021-07-14 11:19 ` [PATCH v6 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger 2021-07-14 11:19 ` [PATCH v6 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger 2021-07-14 15:44 ` [PATCH v6 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 " Rob Herring 2021-07-14 15:44 ` [PATCH v6 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Rob Herring 2021-07-14 17:53 ` [PATCH v6 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 " Laurent Pinchart 2021-07-14 17:53 ` Laurent Pinchart 2021-07-14 18:07 ` Martin Kepplinger 2021-07-14 18:07 ` Martin Kepplinger 2021-07-14 18:07 ` Martin Kepplinger 2021-07-14 11:19 ` [PATCH v6 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger 2021-07-14 11:19 ` Martin Kepplinger 2021-07-14 18:24 ` Laurent Pinchart 2021-07-14 18:24 ` Laurent Pinchart 2021-07-15 6:49 ` Martin Kepplinger 2021-07-15 6:49 ` Martin Kepplinger 2021-07-15 6:49 ` Martin Kepplinger 2021-07-15 21:47 ` Laurent Pinchart 2021-07-15 21:47 ` Laurent Pinchart 2021-07-15 7:37 ` Martin Kepplinger 2021-07-15 7:37 ` Martin Kepplinger 2021-07-15 7:37 ` Martin Kepplinger 2021-07-15 21:52 ` Laurent Pinchart 2021-07-15 21:52 ` Laurent Pinchart 2021-07-16 8:47 ` Martin Kepplinger 2021-07-16 8:47 ` Martin Kepplinger 2021-07-16 8:47 ` Martin Kepplinger 2021-07-16 10:47 ` Laurent Pinchart 2021-07-16 10:47 ` Laurent Pinchart 2021-07-19 10:46 ` Martin Kepplinger 2021-07-19 10:46 ` Martin Kepplinger 2021-07-19 10:46 ` Martin Kepplinger 2021-07-19 14:20 ` Martin Kepplinger 2021-07-19 14:20 ` Martin Kepplinger 2021-07-19 14:20 ` Martin Kepplinger 2021-07-14 11:19 ` [PATCH v6 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger 2021-07-14 11:19 ` Martin Kepplinger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210714111931.324485-1-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=krzk@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-staging@lists.linux.dev \ --cc=m.felsch@pengutronix.de \ --cc=mchehab@kernel.org \ --cc=phone-devel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=slongerbeam@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.