From: Caleb Connolly <caleb@connolly.tech> To: Caleb Connolly <caleb@connolly.tech> Cc: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Thierry Reding <thierry.reding@gmail.com>, Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH 4/5] arm64: dts: qcom: sdm845-oneplus-fajita: remove panel reset gpio Date: Tue, 20 Jul 2021 15:33:51 +0000 [thread overview] Message-ID: <20210720153125.43389-5-caleb@connolly.tech> (raw) In-Reply-To: <20210720153125.43389-1-caleb@connolly.tech> Don't specify the reset GPIO for the OnePlus 6T, the panel in the 6T will refuse to initialise if it has been reset so use this as a workaround. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +--- arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index e81f5cc9f26d..1339bac8afc2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -331,8 +331,6 @@ display_panel: panel@0 { vddio-supply = <&vreg_l14a_1p88>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; @@ -615,7 +613,7 @@ mux { pins = "gpio6", "gpio25", "gpio26"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c887617..5c728c1555f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -16,4 +16,6 @@ &display_panel { status = "okay"; compatible = "samsung,sofef00"; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; }; -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Caleb Connolly <caleb@connolly.tech> To: Caleb Connolly <caleb@connolly.tech> Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>, linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Andy Gross <agross@kernel.org>, Thierry Reding <thierry.reding@gmail.com>, dri-devel@lists.freedesktop.org, Sam Ravnborg <sam@ravnborg.org> Subject: [PATCH 4/5] arm64: dts: qcom: sdm845-oneplus-fajita: remove panel reset gpio Date: Tue, 20 Jul 2021 15:33:51 +0000 [thread overview] Message-ID: <20210720153125.43389-5-caleb@connolly.tech> (raw) In-Reply-To: <20210720153125.43389-1-caleb@connolly.tech> Don't specify the reset GPIO for the OnePlus 6T, the panel in the 6T will refuse to initialise if it has been reset so use this as a workaround. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +--- arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index e81f5cc9f26d..1339bac8afc2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -331,8 +331,6 @@ display_panel: panel@0 { vddio-supply = <&vreg_l14a_1p88>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; @@ -615,7 +613,7 @@ mux { pins = "gpio6", "gpio25", "gpio26"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c887617..5c728c1555f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -16,4 +16,6 @@ &display_panel { status = "okay"; compatible = "samsung,sofef00"; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; }; -- 2.32.0
next prev parent reply other threads:[~2021-07-20 15:46 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-20 15:33 [PATCH 0/5] OnePlus 6 fixes Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly 2021-07-20 15:33 ` [PATCH 1/5] arm64: dts: qcom: sdm845-oneplus: fix reserved-mem Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly 2021-07-20 15:33 ` [PATCH 2/5] dts: arm64: sdm845-oneplus-common: enable debug UART Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly 2021-07-20 15:33 ` [PATCH 3/5] drm/panel/samsung-sofef00: make gpio optional Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly 2021-07-20 16:03 ` Bjorn Andersson 2021-07-20 16:03 ` Bjorn Andersson 2021-07-20 16:24 ` Caleb Connolly 2021-07-20 16:24 ` Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly [this message] 2021-07-20 15:33 ` [PATCH 4/5] arm64: dts: qcom: sdm845-oneplus-fajita: remove panel reset gpio Caleb Connolly 2021-07-20 15:33 ` [PATCH 5/5] arm64: dts: qcom: sdm845-oneplus: add ipa firmware names Caleb Connolly 2021-07-20 15:33 ` Caleb Connolly
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210720153125.43389-5-caleb@connolly.tech \ --to=caleb@connolly.tech \ --cc=agross@kernel.org \ --cc=airlied@linux.ie \ --cc=bjorn.andersson@linaro.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.