From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Seevalamuthu Mariappan <seevalam@codeaurora.org>,
Ritesh Singh <ritesi@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 2/3] ath11k: add support in survey dump with bss_chan_info
Date: Wed, 21 Jul 2021 00:49:21 +0300 [thread overview]
Message-ID: <20210720214922.118078-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210720214922.118078-1-jouni@codeaurora.org>
From: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Survey dump statistics is not displaying channel rx and tx time because
the service flag is not enabled. Enable the service flag "bss_chan_info"
in wmi_resource_config to fetch and print the stats for the specific
pdev.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/hw.c | 2 ++
drivers/net/wireless/ath/ath11k/wmi.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index d9596903b0a5..9dd02f8b1dd2 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -97,6 +97,7 @@ static void ath11k_init_wmi_config_qca6390(struct ath11k_base *ab,
config->num_multicast_filter_entries = 0x20;
config->num_wow_filters = 0x16;
config->num_keep_alive_pattern = 0;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static void ath11k_hw_ipq8074_reo_setup(struct ath11k_base *ab)
@@ -197,6 +198,7 @@ static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
config->peer_map_unmap_v2_support = 1;
config->twt_ap_pdev_count = ab->num_radios;
config->twt_ap_sta_count = 1000;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 234aa59f708e..78849f0255fa 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2244,6 +2244,8 @@ struct wmi_init_cmd {
u32 num_host_mem_chunks;
} __packed;
+#define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
+
struct wmi_resource_config {
u32 tlv_header;
u32 num_vdevs;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Seevalamuthu Mariappan <seevalam@codeaurora.org>,
Ritesh Singh <ritesi@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 2/3] ath11k: add support in survey dump with bss_chan_info
Date: Wed, 21 Jul 2021 00:49:21 +0300 [thread overview]
Message-ID: <20210720214922.118078-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210720214922.118078-1-jouni@codeaurora.org>
From: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Survey dump statistics is not displaying channel rx and tx time because
the service flag is not enabled. Enable the service flag "bss_chan_info"
in wmi_resource_config to fetch and print the stats for the specific
pdev.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/hw.c | 2 ++
drivers/net/wireless/ath/ath11k/wmi.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index d9596903b0a5..9dd02f8b1dd2 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -97,6 +97,7 @@ static void ath11k_init_wmi_config_qca6390(struct ath11k_base *ab,
config->num_multicast_filter_entries = 0x20;
config->num_wow_filters = 0x16;
config->num_keep_alive_pattern = 0;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static void ath11k_hw_ipq8074_reo_setup(struct ath11k_base *ab)
@@ -197,6 +198,7 @@ static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
config->peer_map_unmap_v2_support = 1;
config->twt_ap_pdev_count = ab->num_radios;
config->twt_ap_sta_count = 1000;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 234aa59f708e..78849f0255fa 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2244,6 +2244,8 @@ struct wmi_init_cmd {
u32 num_host_mem_chunks;
} __packed;
+#define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
+
struct wmi_resource_config {
u32 tlv_header;
u32 num_vdevs;
--
2.25.1
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2021-07-20 21:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-20 21:49 [PATCH 1/3] ath11k: Rename atf_config to flag1 in target_resource_config Jouni Malinen
2021-07-20 21:49 ` Jouni Malinen
2021-07-20 21:49 ` Jouni Malinen [this message]
2021-07-20 21:49 ` [PATCH 2/3] ath11k: add support in survey dump with bss_chan_info Jouni Malinen
2021-07-20 21:49 ` [PATCH 3/3] ath11k: Align bss_chan_info structure with firmware Jouni Malinen
2021-07-20 21:49 ` Jouni Malinen
2021-09-16 9:24 ` [PATCH 1/3] ath11k: Rename atf_config to flag1 in target_resource_config Kalle Valo
2021-09-16 9:24 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210720214922.118078-2-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=ritesi@codeaurora.org \
--cc=seevalam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.