From: Maxime Ripard <maxime@cerno.tech> To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime@cerno.tech>, Jernej Skrabec <jernej.skrabec@siol.net>, devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com> Cc: linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Lee Jones <lee.jones@linaro.org> Subject: [PATCH 24/54] dt-bindings: mfd: Convert X-Powers AXP binding to a schema Date: Wed, 21 Jul 2021 16:03:54 +0200 [thread overview] Message-ID: <20210721140424.725744-25-maxime@cerno.tech> (raw) In-Reply-To: <20210721140424.725744-1-maxime@cerno.tech> The X-Powers AXP PMICs are supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- .../devicetree/bindings/mfd/axp20x.txt | 272 ------------- .../bindings/mfd/x-powers,axp152.yaml | 381 ++++++++++++++++++ 2 files changed, 381 insertions(+), 272 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt deleted file mode 100644 index 4991a6415796..000000000000 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ /dev/null @@ -1,272 +0,0 @@ -AXP family PMIC device tree bindings - -The axp20x family current members : -axp152 (X-Powers) -axp202 (X-Powers) -axp209 (X-Powers) -axp221 (X-Powers) -axp223 (X-Powers) -axp803 (X-Powers) -axp806 (X-Powers) -axp809 (X-Powers) -axp813 (X-Powers) - -The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything -other than the packaging. Pins are routed separately. As such they should -be treated as separate entities. The other half is an AC100 RTC/codec -combo chip. Please see ./ac100.txt for its bindings. - -Required properties: -- compatible: should be one of: - * "x-powers,axp152" - * "x-powers,axp202" - * "x-powers,axp209" - * "x-powers,axp221" - * "x-powers,axp223" - * "x-powers,axp803" - * "x-powers,axp806" - * "x-powers,axp805", "x-powers,axp806" - * "x-powers,axp809" - * "x-powers,axp813" -- reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- interrupt-controller: The PMIC has its own internal IRQs -- #interrupt-cells: Should be set to 1 - -Supported common regulator properties, see ../regulator/regulator.txt for -more information: -- regulator-ramp-delay: sets the ramp up delay in uV/us - AXP20x/DCDC2: 1600, 800 - AXP20x/LDO3: 1600, 800 -- regulator-soft-start: enable the output at the lowest possible voltage and - only then set the desired voltage - AXP20x/LDO3: software-based implementation - -Optional properties: -- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz - AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/8XX: range: 1800-4050, Default: 3 MHz - -- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is - used as an output pin to control an external - regulator to drive the OTG VBus, rather then - as an input pin which signals whether the - board is driving OTG VBus or not. - (axp221 / axp223 / axp803/ axp813 only) - -- x-powers,self-working-mode and - x-powers,master-mode: Boolean (axp806 only). Set either of these when the - PMIC is wired for self-working mode or master mode. - If neither is set then slave mode is assumed. - This corresponds to how the MODESET pin is wired. - -- <input>-supply: a phandle to the regulator supply node. May be omitted if - inputs are unregulated, such as using the IPSOUT output - from the PMIC. - -- regulators: A node that houses a sub-node for each regulator. Regulators - not used but preferred to be managed by the OS should be - listed as well. - See Documentation/devicetree/bindings/regulator/regulator.txt - for more information on standard regulator bindings. - -Optional properties for DCDC regulators: -- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode - Default: Current hardware setting - The DCDC regulators work in a mixed PWM/PFM mode, - using PFM under light loads and switching to PWM - for heavier loads. Forcing PWM mode trades efficiency - under light loads for lower output noise. This - probably makes sense for HiFi audio related - applications that aren't battery constrained. - -AXP202/AXP209 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -LDO1 : LDO : acin-supply : always on -LDO2 : LDO : ldo24in-supply : shared supply -LDO3 : LDO : ldo3in-supply -LDO4 : LDO : ldo24in-supply : shared supply -LDO5 : LDO : ldo5in-supply - -AXP221/AXP223 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP803 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DC1SW : On/Off Switch : : DCDC1 secondary output -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP806 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDCA : DC-DC buck : vina-supply : poly-phase capable -DCDCB : DC-DC buck : vinb-supply : poly-phase capable -DCDCC : DC-DC buck : vinc-supply : poly-phase capable -DCDCD : DC-DC buck : vind-supply : poly-phase capable -DCDCE : DC-DC buck : vine-supply : poly-phase capable -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -BLDO1 : LDO : bldoin-supply : shared supply -BLDO2 : LDO : bldoin-supply : shared supply -BLDO3 : LDO : bldoin-supply : shared supply -BLDO4 : LDO : bldoin-supply : shared supply -CLDO1 : LDO : cldoin-supply : shared supply -CLDO2 : LDO : cldoin-supply : shared supply -CLDO3 : LDO : cldoin-supply : shared supply -SW : On/Off Switch : swin-supply - -Additionally, the AXP806 DC-DC regulators support poly-phase arrangements -for higher output current. The possible groupings are: A+B, A+B+C, D+E. - -AXP809 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply - -AXP813 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DCDC7 : DC-DC buck : vin7-supply -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -FLDO3 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <1500>; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; - }; - - vdd_int_dll: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; - }; - - vdd_rtc: ldo1 { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-rtc"; - }; - - avcc: ldo2 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - }; - - ldo3 { - /* unused but preferred to be managed by OS */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 000000000000..e2804965ba0c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,381 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + not: + required: + - x-powers,drive-vbus-en + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + allOf: + - not: + required: + - x-powers,self-working-mode + + - not: + required: + - x-powers,master-mode + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + + properties: + regulator-ramp-delay: + enum: [ 800, 1600 ] + description: > + Only valid for the DCDC2 and LDO3 regulators. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + - interrupts + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech> To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime@cerno.tech>, Jernej Skrabec <jernej.skrabec@siol.net>, devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com> Cc: linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Lee Jones <lee.jones@linaro.org> Subject: [PATCH 24/54] dt-bindings: mfd: Convert X-Powers AXP binding to a schema Date: Wed, 21 Jul 2021 16:03:54 +0200 [thread overview] Message-ID: <20210721140424.725744-25-maxime@cerno.tech> (raw) In-Reply-To: <20210721140424.725744-1-maxime@cerno.tech> The X-Powers AXP PMICs are supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- .../devicetree/bindings/mfd/axp20x.txt | 272 ------------- .../bindings/mfd/x-powers,axp152.yaml | 381 ++++++++++++++++++ 2 files changed, 381 insertions(+), 272 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt deleted file mode 100644 index 4991a6415796..000000000000 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ /dev/null @@ -1,272 +0,0 @@ -AXP family PMIC device tree bindings - -The axp20x family current members : -axp152 (X-Powers) -axp202 (X-Powers) -axp209 (X-Powers) -axp221 (X-Powers) -axp223 (X-Powers) -axp803 (X-Powers) -axp806 (X-Powers) -axp809 (X-Powers) -axp813 (X-Powers) - -The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything -other than the packaging. Pins are routed separately. As such they should -be treated as separate entities. The other half is an AC100 RTC/codec -combo chip. Please see ./ac100.txt for its bindings. - -Required properties: -- compatible: should be one of: - * "x-powers,axp152" - * "x-powers,axp202" - * "x-powers,axp209" - * "x-powers,axp221" - * "x-powers,axp223" - * "x-powers,axp803" - * "x-powers,axp806" - * "x-powers,axp805", "x-powers,axp806" - * "x-powers,axp809" - * "x-powers,axp813" -- reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- interrupt-controller: The PMIC has its own internal IRQs -- #interrupt-cells: Should be set to 1 - -Supported common regulator properties, see ../regulator/regulator.txt for -more information: -- regulator-ramp-delay: sets the ramp up delay in uV/us - AXP20x/DCDC2: 1600, 800 - AXP20x/LDO3: 1600, 800 -- regulator-soft-start: enable the output at the lowest possible voltage and - only then set the desired voltage - AXP20x/LDO3: software-based implementation - -Optional properties: -- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz - AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/8XX: range: 1800-4050, Default: 3 MHz - -- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is - used as an output pin to control an external - regulator to drive the OTG VBus, rather then - as an input pin which signals whether the - board is driving OTG VBus or not. - (axp221 / axp223 / axp803/ axp813 only) - -- x-powers,self-working-mode and - x-powers,master-mode: Boolean (axp806 only). Set either of these when the - PMIC is wired for self-working mode or master mode. - If neither is set then slave mode is assumed. - This corresponds to how the MODESET pin is wired. - -- <input>-supply: a phandle to the regulator supply node. May be omitted if - inputs are unregulated, such as using the IPSOUT output - from the PMIC. - -- regulators: A node that houses a sub-node for each regulator. Regulators - not used but preferred to be managed by the OS should be - listed as well. - See Documentation/devicetree/bindings/regulator/regulator.txt - for more information on standard regulator bindings. - -Optional properties for DCDC regulators: -- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode - Default: Current hardware setting - The DCDC regulators work in a mixed PWM/PFM mode, - using PFM under light loads and switching to PWM - for heavier loads. Forcing PWM mode trades efficiency - under light loads for lower output noise. This - probably makes sense for HiFi audio related - applications that aren't battery constrained. - -AXP202/AXP209 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -LDO1 : LDO : acin-supply : always on -LDO2 : LDO : ldo24in-supply : shared supply -LDO3 : LDO : ldo3in-supply -LDO4 : LDO : ldo24in-supply : shared supply -LDO5 : LDO : ldo5in-supply - -AXP221/AXP223 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP803 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DC1SW : On/Off Switch : : DCDC1 secondary output -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP806 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDCA : DC-DC buck : vina-supply : poly-phase capable -DCDCB : DC-DC buck : vinb-supply : poly-phase capable -DCDCC : DC-DC buck : vinc-supply : poly-phase capable -DCDCD : DC-DC buck : vind-supply : poly-phase capable -DCDCE : DC-DC buck : vine-supply : poly-phase capable -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -BLDO1 : LDO : bldoin-supply : shared supply -BLDO2 : LDO : bldoin-supply : shared supply -BLDO3 : LDO : bldoin-supply : shared supply -BLDO4 : LDO : bldoin-supply : shared supply -CLDO1 : LDO : cldoin-supply : shared supply -CLDO2 : LDO : cldoin-supply : shared supply -CLDO3 : LDO : cldoin-supply : shared supply -SW : On/Off Switch : swin-supply - -Additionally, the AXP806 DC-DC regulators support poly-phase arrangements -for higher output current. The possible groupings are: A+B, A+B+C, D+E. - -AXP809 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply - -AXP813 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DCDC7 : DC-DC buck : vin7-supply -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -FLDO3 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <1500>; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; - }; - - vdd_int_dll: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; - }; - - vdd_rtc: ldo1 { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-rtc"; - }; - - avcc: ldo2 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - }; - - ldo3 { - /* unused but preferred to be managed by OS */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 000000000000..e2804965ba0c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,381 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + not: + required: + - x-powers,drive-vbus-en + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + allOf: + - not: + required: + - x-powers,self-working-mode + + - not: + required: + - x-powers,master-mode + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + + properties: + regulator-ramp-delay: + enum: [ 800, 1600 ] + description: > + Only valid for the DCDC2 and LDO3 regulators. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + - interrupts + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-21 14:05 UTC|newest] Thread overview: 281+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-21 14:03 [PATCH 00/54] ARM: dts: Last round of DT schema fixes Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` [PATCH 01/54] ASoC: dt-bindings: Add WM8978 Binding Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:32 ` Rob Herring 2021-07-23 21:32 ` Rob Herring 2021-07-23 21:32 ` Rob Herring 2021-07-26 0:17 ` Mark Brown 2021-07-26 0:17 ` Mark Brown 2021-07-26 0:17 ` Mark Brown 2021-07-27 12:21 ` Richard Fitzgerald 2021-07-27 12:21 ` Richard Fitzgerald 2021-07-27 12:21 ` Richard Fitzgerald 2021-07-27 12:58 ` Mark Brown 2021-07-27 12:58 ` Mark Brown 2021-07-27 12:58 ` Mark Brown 2021-07-21 14:03 ` [PATCH 02/54] ASoC: dt-bindings: Convert Bluetooth SCO Link binding to a schema Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-22 5:35 ` Samuel Holland 2021-07-22 5:35 ` Samuel Holland 2021-07-22 5:35 ` Samuel Holland 2021-07-22 7:58 ` Maxime Ripard 2021-07-22 7:58 ` Maxime Ripard 2021-07-22 7:58 ` Maxime Ripard 2021-07-21 14:03 ` [PATCH 03/54] ASoC: dt-bindings: Convert SPDIF Transmitter " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:35 ` Rob Herring 2021-07-23 21:35 ` Rob Herring 2021-07-23 21:35 ` Rob Herring 2021-07-21 14:03 ` [PATCH 04/54] ASoC: dt-bindings: Convert Simple Amplifier " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:36 ` Rob Herring 2021-07-23 21:36 ` Rob Herring 2021-07-23 21:36 ` Rob Herring 2021-07-21 14:03 ` [PATCH 05/54] dt-bindings: Convert Reserved Memory " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:30 ` Rob Herring 2021-07-21 14:30 ` Rob Herring 2021-07-21 14:30 ` Rob Herring 2021-08-18 10:00 ` Maxime Ripard 2021-08-18 10:00 ` Maxime Ripard 2021-08-18 10:00 ` Maxime Ripard 2021-08-18 12:54 ` Rob Herring 2021-08-18 12:54 ` Rob Herring 2021-08-18 12:54 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-21 14:03 ` [PATCH 06/54] dt-bindings: arm: Convert ARM CCI-400 " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:26 ` Rob Herring 2021-07-22 2:26 ` Rob Herring 2021-07-21 14:03 ` [PATCH 07/54] dt-bindings: bluetooth: broadcom: Fix clocks check Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:38 ` Rob Herring 2021-07-23 21:38 ` Rob Herring 2021-07-21 14:03 ` [PATCH 08/54] dt-bindings: bluetooth: realtek: Add missing max-speed Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:39 ` Rob Herring 2021-07-23 21:39 ` Rob Herring 2021-07-23 22:56 ` Alistair 2021-07-23 22:56 ` Alistair 2021-07-21 14:03 ` [PATCH 09/54] dt-bindings: clocks: Fix typo in the H6 compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:39 ` Rob Herring 2021-07-23 21:39 ` Rob Herring 2021-07-21 14:03 ` [PATCH 10/54] dt-bindings: display: panel-lvds: Document panel compatibles Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:14 ` Sam Ravnborg 2021-07-21 14:14 ` Sam Ravnborg 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:29 ` Rob Herring 2021-07-22 2:29 ` Rob Herring 2021-07-22 2:29 ` Rob Herring 2021-08-18 12:43 ` Maxime Ripard 2021-08-18 12:43 ` Maxime Ripard 2021-08-18 13:48 ` Rob Herring 2021-08-18 13:48 ` Rob Herring 2021-08-18 13:48 ` Rob Herring 2021-08-23 16:31 ` Maxime Ripard 2021-08-23 16:31 ` Maxime Ripard 2021-07-21 14:03 ` [PATCH 11/54] dt-bindings: display: simple-bridge: Add corpro,gm7123 compatible Maxime Ripard 2021-07-21 14:03 ` [PATCH 11/54] dt-bindings: display: simple-bridge: Add corpro, gm7123 compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-21 14:16 ` Sam Ravnborg 2021-07-21 14:16 ` Sam Ravnborg 2021-07-22 9:44 ` Maxime Ripard 2021-07-22 9:44 ` Maxime Ripard 2021-07-22 9:44 ` Maxime Ripard 2021-07-21 14:03 ` [PATCH 12/54] dt-bindings: gnss: Convert UBlox Neo-6M binding to a schema Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:42 ` Rob Herring 2021-07-23 21:42 ` Rob Herring 2021-07-21 14:03 ` [PATCH 13/54] dt-bindings: gpio: Convert X-Powers AXP209 GPIO " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:13 ` Rob Herring 2021-07-22 2:13 ` Rob Herring 2021-07-21 14:03 ` [PATCH 14/54] dt-bindings: hwmon: Add IIO HWMON binding Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-22 9:20 ` Jonathan Cameron 2021-07-22 9:20 ` Jonathan Cameron 2021-07-22 9:34 ` Maxime Ripard 2021-07-22 9:34 ` Maxime Ripard 2021-07-23 21:44 ` Rob Herring 2021-07-23 21:44 ` Rob Herring 2021-07-21 14:03 ` [PATCH 15/54] dt-bindings: iio: st: Remove wrong items length check Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:47 ` Rob Herring 2021-07-23 21:47 ` Rob Herring 2021-07-23 22:45 ` Linus Walleij 2021-07-23 22:45 ` Linus Walleij 2021-07-21 14:03 ` [PATCH 16/54] dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:48 ` Rob Herring 2021-07-23 21:48 ` Rob Herring 2021-07-21 14:03 ` [PATCH 17/54] dt-bindings: input: Convert Pixcir Touchscreen " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:49 ` Rob Herring 2021-07-23 21:49 ` Rob Herring 2021-07-21 14:03 ` [PATCH 18/54] dt-bindings: input: Convert Regulator Haptic " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:50 ` Rob Herring 2021-07-23 21:50 ` Rob Herring 2021-07-21 14:03 ` [PATCH 19/54] dt-bindings: input: Convert Silead GSL1680 " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:51 ` Rob Herring 2021-07-23 21:51 ` Rob Herring 2021-07-21 14:03 ` [PATCH 20/54] dt-bindings: input: sun4i-lradc: Add wakeup-source Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:52 ` Rob Herring 2021-07-23 21:52 ` Rob Herring 2021-07-21 14:03 ` [PATCH 21/54] dt-bindings: interconnect: sunxi: Add R40 MBUS compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:52 ` Rob Herring 2021-07-23 21:52 ` Rob Herring 2021-07-21 14:03 ` [PATCH 22/54] dt-bindings: media: Convert OV5640 binding to a schema Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-21 14:03 ` [PATCH 23/54] dt-bindings: mfd: Convert X-Powers AC100 " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:54 ` Rob Herring 2021-07-23 21:54 ` Rob Herring 2021-08-01 12:15 ` [linux-sunxi] " Chen-Yu Tsai 2021-08-01 12:15 ` Chen-Yu Tsai 2021-07-21 14:03 ` Maxime Ripard [this message] 2021-07-21 14:03 ` [PATCH 24/54] dt-bindings: mfd: Convert X-Powers AXP " Maxime Ripard 2021-07-22 2:09 ` Rob Herring 2021-07-22 2:09 ` Rob Herring 2021-07-21 14:03 ` [PATCH 25/54] dt-bindings: mmc: Convert MMC Card " Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:57 ` Rob Herring 2021-07-23 21:57 ` Rob Herring 2021-08-04 11:24 ` Ulf Hansson 2021-08-04 11:24 ` Ulf Hansson 2021-07-21 14:03 ` [PATCH 26/54] dt-bindings: net: dwmac: Fix typo in the R40 compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:57 ` Rob Herring 2021-07-23 21:57 ` Rob Herring 2021-07-21 14:03 ` [PATCH 27/54] dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schema Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:58 ` Rob Herring 2021-07-23 21:58 ` Rob Herring 2021-08-06 8:47 ` Kalle Valo [not found] ` <20210806084709.0C279C4338A@smtp.codeaurora.org> 2021-08-18 8:45 ` Maxime Ripard 2021-08-18 8:45 ` Maxime Ripard 2021-07-21 14:03 ` [PATCH 28/54] dt-bindings: power: supply: axp20x: Add AXP803 compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 21:59 ` Rob Herring 2021-07-23 21:59 ` Rob Herring 2021-08-01 12:16 ` [linux-sunxi] " Chen-Yu Tsai 2021-08-01 12:16 ` Chen-Yu Tsai 2021-08-06 21:33 ` Sebastian Reichel 2021-08-06 21:33 ` Sebastian Reichel 2021-07-21 14:03 ` [PATCH 29/54] dt-bindings: power: supply: axp20x-battery: Add AXP209 compatible Maxime Ripard 2021-07-21 14:03 ` Maxime Ripard 2021-07-23 22:00 ` Rob Herring 2021-07-23 22:00 ` Rob Herring 2021-08-06 21:34 ` Sebastian Reichel 2021-08-06 21:34 ` Sebastian Reichel 2021-07-21 14:04 ` [PATCH 30/54] dt-bindings: regulator: Convert SY8106A binding to a schema Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:01 ` Rob Herring 2021-07-23 22:01 ` Rob Herring 2021-07-21 14:04 ` [PATCH 31/54] dt-bindings: sunxi: Add CPU Configuration Controller Binding Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:01 ` Rob Herring 2021-07-23 22:01 ` Rob Herring 2021-07-21 14:04 ` [PATCH 32/54] dt-bindings: sunxi: Add Allwinner A80 PRCM Binding Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:02 ` Rob Herring 2021-07-23 22:02 ` Rob Herring 2021-07-21 14:04 ` [PATCH 33/54] dt-bindings: thermal: Make trips node optional Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:03 ` Rob Herring 2021-07-23 22:03 ` Rob Herring 2021-08-14 13:42 ` Daniel Lezcano 2021-08-14 13:42 ` Daniel Lezcano 2021-09-09 14:38 ` [thermal: thermal/next] " thermal-bot for Maxime Ripard 2021-07-21 14:04 ` [PATCH 34/54] dt-bindings: usb: Convert SMSC USB3503 binding to a schema Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:08 ` Rob Herring 2021-07-23 22:08 ` Rob Herring 2021-07-21 14:04 ` [PATCH 35/54] dt-bindings: usb: dwc3: Fix usb-phy check Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:15 ` Rob Herring 2021-07-23 22:15 ` Rob Herring 2021-07-29 12:29 ` Maxime Ripard 2021-07-29 12:29 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 36/54] dt-bindings: usb: ehci: Add Allwinner A83t compatible Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:15 ` Rob Herring 2021-07-23 22:15 ` Rob Herring 2021-07-21 14:04 ` [PATCH 37/54] dt-bindings: usb: ohci: " Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:16 ` Rob Herring 2021-07-23 22:16 ` Rob Herring 2021-07-21 14:04 ` [PATCH 38/54] dt-bindings: w1: Convert 1-Wire GPIO binding to a schema Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-23 22:19 ` Rob Herring 2021-07-23 22:19 ` Rob Herring 2021-07-21 14:04 ` [PATCH 39/54] ARM: dts: sunxi: Rename power-supply names Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 40/54] ARM: dts: sunxi: Rename gpio pinctrl names Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 41/54] ARM: dts: sunxi: Fix OPP arrays Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 42/54] ARM: dts: sunxi: Fix OPPs node name Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 43/54] ARM: dts: sunxi: Fix the SPI NOR node names Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 44/54] ARM: dts: v3s: Remove useless DMA properties Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 45/54] ARM: dts: tbs711: Fix touchscreen compatible Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 46/54] ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-08-01 12:19 ` [linux-sunxi] " Chen-Yu Tsai 2021-08-01 12:19 ` Chen-Yu Tsai 2021-07-21 14:04 ` [PATCH 47/54] arm64: dts: allwinner: h5: Fix GPU thermal zone node name Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 48/54] arm64: dts: allwinner: h6: Fix de3 parent clocks ordering Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 49/54] arm64: dts: allwinner: a100: Fix thermal zone node name Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 50/54] arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 51/54] arm64: dts: allwinner: teres-i: Add missing reg Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 52/54] arm64: dts: allwinner: Remove regulator-ramp-delay Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-22 5:55 ` Samuel Holland 2021-07-22 5:55 ` Samuel Holland 2021-07-22 8:16 ` Maxime Ripard 2021-07-22 8:16 ` Maxime Ripard 2021-08-06 11:48 ` [linux-sunxi] " Icenowy Zheng 2021-08-06 11:48 ` Icenowy Zheng 2021-08-06 12:05 ` Chen-Yu Tsai 2021-08-06 12:05 ` Chen-Yu Tsai 2021-08-06 12:09 ` Icenowy Zheng 2021-08-06 12:09 ` Icenowy Zheng 2021-07-21 14:04 ` [PATCH 53/54] arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 14:04 ` [PATCH 54/54] arm64: dts: allwinner: pinephone: Fix BT SCO codec cells size Maxime Ripard 2021-07-21 14:04 ` Maxime Ripard 2021-07-21 16:48 ` [PATCH 00/54] ARM: dts: Last round of DT schema fixes Rob Herring 2021-07-21 16:48 ` Rob Herring 2021-07-29 12:03 ` Maxime Ripard 2021-07-29 12:03 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210721140424.725744-25-maxime@cerno.tech \ --to=maxime@cerno.tech \ --cc=devicetree@vger.kernel.org \ --cc=frowand.list@gmail.com \ --cc=jernej.skrabec@siol.net \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-sunxi@googlegroups.com \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.