From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: bjorn.andersson@linaro.org, broonie@kernel.org, robh@kernel.org Cc: plai@codeaurora.org, tiwai@suse.de, devicetree@vger.kernel.org, perex@perex.cz, alsa-devel@alsa-project.org, lgirdwood@gmail.com, bgoswami@codeaurora.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH v3 01/20] soc: dt-bindings: qcom: apr: convert to yaml Date: Tue, 3 Aug 2021 13:53:52 +0100 [thread overview] Message-ID: <20210803125411.28066-2-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20210803125411.28066-1-srinivas.kandagatla@linaro.org> Convert APR bindings to yaml format so that we could add new bindings support. All the dsp services bindings are now part of apr bindings instead of adding them to audio bindings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../devicetree/bindings/soc/qcom/qcom,apr.txt | 134 ------------------ .../bindings/soc/qcom/qcom,apr.yaml | 127 +++++++++++++++++ 2 files changed, 127 insertions(+), 134 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt deleted file mode 100644 index 2e2f6dc351c0..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ /dev/null @@ -1,134 +0,0 @@ -Qualcomm APR (Asynchronous Packet Router) binding - -This binding describes the Qualcomm APR. APR is a IPC protocol for -communication between Application processor and QDSP. APR is mainly -used for audio/voice services on the QDSP. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2" - -- qcom,apr-domain - Usage: required - Value type: <u32> - Definition: Destination processor ID. - Possible values are : - 1 - APR simulator - 2 - PC - 3 - MODEM - 4 - ADSP - 5 - APPS - 6 - MODEM2 - 7 - APPS2 - -= APR SERVICES -Each subnode of the APR node represents service tied to this apr. The name -of the nodes are not important. The properties of these nodes are defined -by the individual bindings for the specific service -- All APR services MUST contain the following property: - -- reg - Usage: required - Value type: <u32> - Definition: APR Service ID - Possible values are : - 3 - DSP Core Service - 4 - Audio Front End Service. - 5 - Voice Stream Manager Service. - 6 - Voice processing manager. - 7 - Audio Stream Manager Service. - 8 - Audio Device Manager Service. - 9 - Multimode voice manager. - 10 - Core voice stream. - 11 - Core voice processor. - 12 - Ultrasound stream manager. - 13 - Listen stream manager. - -- qcom,protection-domain - Usage: optional - Value type: <stringlist> - Definition: Must list the protection domain service name and path - that the particular apr service has a dependency on. - Possible values are : - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - -= EXAMPLE -The following example represents a QDSP based sound card on a MSM8996 device -which uses apr as communication between Apps and QDSP. - - apr { - compatible = "qcom,apr-v2"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - - dais { - #sound-dai-cells = <1>; - dai@1 { - reg = <HDMI_RX>; - }; - }; - }; - - apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - ... - }; - - apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - ... - }; - }; - -= EXAMPLE 2 -The following example represents a QDSP based sound card with protection domain -dependencies specified. Here some of the apr services are dependent on services -running on protection domain hosted on ADSP/SLPI remote processors while others -have no such dependency. - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - q6afe: apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - - q6asm: apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; - ... - }; - - q6adm: apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml new file mode 100644 index 000000000000..12650f7084f4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm APR (Asynchronous Packet Router) binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APR, APR is a IPC protocol for + communication between Application processor and QDSP. APR is mainly + used for audio/voice services on the QDSP. + +properties: + compatible: + enum: + - qcom,apr + - qcom,apr-v2 + + qcom,apr-domain: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6, 7] + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#APR Services +patternProperties: + "^apr-service@[0-9a-e]$": + type: object + description: + APR node's client devices use subnodes for desired static port services. + + properties: + compatible: + enum: + - qcom,q6core + - qcom,q6asm + - qcom,q6afe + - qcom,q6adm + + reg: + enum: [3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13] + description: + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: protection domain service name and path for apr service + has dependency on. + items: + - const: avs/audio + - const: msm/adsp/audio_pd + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + additionalProperties: false + +required: + - compatible + - qcom,apr-domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + apr { + compatible = "qcom,apr-v2"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: apr-service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + }; -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: bjorn.andersson@linaro.org, broonie@kernel.org, robh@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, bgoswami@codeaurora.org, tiwai@suse.de, plai@codeaurora.org, lgirdwood@gmail.com Subject: [PATCH v3 01/20] soc: dt-bindings: qcom: apr: convert to yaml Date: Tue, 3 Aug 2021 13:53:52 +0100 [thread overview] Message-ID: <20210803125411.28066-2-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20210803125411.28066-1-srinivas.kandagatla@linaro.org> Convert APR bindings to yaml format so that we could add new bindings support. All the dsp services bindings are now part of apr bindings instead of adding them to audio bindings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../devicetree/bindings/soc/qcom/qcom,apr.txt | 134 ------------------ .../bindings/soc/qcom/qcom,apr.yaml | 127 +++++++++++++++++ 2 files changed, 127 insertions(+), 134 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt deleted file mode 100644 index 2e2f6dc351c0..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ /dev/null @@ -1,134 +0,0 @@ -Qualcomm APR (Asynchronous Packet Router) binding - -This binding describes the Qualcomm APR. APR is a IPC protocol for -communication between Application processor and QDSP. APR is mainly -used for audio/voice services on the QDSP. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2" - -- qcom,apr-domain - Usage: required - Value type: <u32> - Definition: Destination processor ID. - Possible values are : - 1 - APR simulator - 2 - PC - 3 - MODEM - 4 - ADSP - 5 - APPS - 6 - MODEM2 - 7 - APPS2 - -= APR SERVICES -Each subnode of the APR node represents service tied to this apr. The name -of the nodes are not important. The properties of these nodes are defined -by the individual bindings for the specific service -- All APR services MUST contain the following property: - -- reg - Usage: required - Value type: <u32> - Definition: APR Service ID - Possible values are : - 3 - DSP Core Service - 4 - Audio Front End Service. - 5 - Voice Stream Manager Service. - 6 - Voice processing manager. - 7 - Audio Stream Manager Service. - 8 - Audio Device Manager Service. - 9 - Multimode voice manager. - 10 - Core voice stream. - 11 - Core voice processor. - 12 - Ultrasound stream manager. - 13 - Listen stream manager. - -- qcom,protection-domain - Usage: optional - Value type: <stringlist> - Definition: Must list the protection domain service name and path - that the particular apr service has a dependency on. - Possible values are : - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - -= EXAMPLE -The following example represents a QDSP based sound card on a MSM8996 device -which uses apr as communication between Apps and QDSP. - - apr { - compatible = "qcom,apr-v2"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - - dais { - #sound-dai-cells = <1>; - dai@1 { - reg = <HDMI_RX>; - }; - }; - }; - - apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - ... - }; - - apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - ... - }; - }; - -= EXAMPLE 2 -The following example represents a QDSP based sound card with protection domain -dependencies specified. Here some of the apr services are dependent on services -running on protection domain hosted on ADSP/SLPI remote processors while others -have no such dependency. - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - q6afe: apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - - q6asm: apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; - ... - }; - - q6adm: apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml new file mode 100644 index 000000000000..12650f7084f4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm APR (Asynchronous Packet Router) binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APR, APR is a IPC protocol for + communication between Application processor and QDSP. APR is mainly + used for audio/voice services on the QDSP. + +properties: + compatible: + enum: + - qcom,apr + - qcom,apr-v2 + + qcom,apr-domain: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6, 7] + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#APR Services +patternProperties: + "^apr-service@[0-9a-e]$": + type: object + description: + APR node's client devices use subnodes for desired static port services. + + properties: + compatible: + enum: + - qcom,q6core + - qcom,q6asm + - qcom,q6afe + - qcom,q6adm + + reg: + enum: [3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13] + description: + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: protection domain service name and path for apr service + has dependency on. + items: + - const: avs/audio + - const: msm/adsp/audio_pd + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + additionalProperties: false + +required: + - compatible + - qcom,apr-domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + apr { + compatible = "qcom,apr-v2"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: apr-service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + }; -- 2.21.0
next prev parent reply other threads:[~2021-08-03 12:54 UTC|newest] Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-03 12:53 [PATCH v3 00/20] ASoC: qcom: Add AudioReach support Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla [this message] 2021-08-03 12:53 ` [PATCH v3 01/20] soc: dt-bindings: qcom: apr: convert to yaml Srinivas Kandagatla 2021-08-03 12:53 ` [PATCH v3 02/20] soc: qcom: apr: make code more reuseable Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:53 ` [PATCH v3 03/20] soc: dt-bindings: qcom: add gpr bindings Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:53 ` [PATCH v3 04/20] soc: qcom: apr: Add GPR support Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:53 ` [PATCH v3 05/20] ASoC: dt-bindings: replace q6afe bindings with q6dsp-audio-ports Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-04 17:53 ` Mark Brown 2021-08-04 17:53 ` Mark Brown 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-11 18:19 ` Rob Herring 2021-08-11 18:19 ` Rob Herring 2021-08-03 12:53 ` [PATCH v3 06/20] ASoC: dt-bindings: replace q6afe-clk with q6dsp audio clk bindings Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-11 18:24 ` Rob Herring 2021-08-11 18:24 ` Rob Herring 2021-08-03 12:53 ` [PATCH v3 07/20] ASoC: dt-bindings: replace q6asm with q6dsp audio stream bindings Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:53 ` [PATCH v3 08/20] ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file Srinivas Kandagatla 2021-08-03 12:53 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 09/20] ASoC: qdsp6: q6afe-clocks: move audio-clocks " Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 10/20] ASoC: dt-bindings: q6dsp: add q6apm-dai compatible Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-04 18:01 ` Mark Brown 2021-08-04 18:01 ` Mark Brown 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 11/20] ASoC: dt-bindings: q6dsp: add q6apm-bedai compatible Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-04 18:01 ` Mark Brown 2021-08-04 18:01 ` Mark Brown 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-05 9:16 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 12/20] ASoC: dt-bindings: q6dsp-clocks: add q6prm clocks compatible Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-04 18:02 ` Mark Brown 2021-08-04 18:02 ` Mark Brown 2021-08-05 9:17 ` Srinivas Kandagatla 2021-08-05 9:17 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 13/20] ASoC: qdsp6: audioreach: add basic pkt alloc support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 14:19 ` Amadeusz Sławiński 2021-08-03 14:39 ` Srinivas Kandagatla 2021-08-04 18:09 ` Mark Brown 2021-08-04 18:09 ` Mark Brown 2021-08-05 9:17 ` Srinivas Kandagatla 2021-08-05 9:17 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 14/20] ASoC: qdsp6: audioreach: add q6apm support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 14:20 ` Amadeusz Sławiński 2021-08-03 14:48 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 15/20] ASoC: qdsp6: audioreach: add module configuration command helpers Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 16/20] ASoC: qdsp6: audioreach: add topology support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 14:21 ` Amadeusz Sławiński 2021-08-03 14:47 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 17/20] ASoC: qdsp6: audioreach: add q6apm-dai support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 18/20] ASoC: qdsp6: audioreach: add bedai support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 19/20] ASoC: qdsp6: audioreach: add q6prm support Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 12:54 ` [PATCH v3 20/20] ASoC: qdsp6: audioreach: add support for q6prm-clocks Srinivas Kandagatla 2021-08-03 12:54 ` Srinivas Kandagatla 2021-08-03 15:00 ` [PATCH v3 00/20] ASoC: qcom: Add AudioReach support Pierre-Louis Bossart 2021-08-03 15:03 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210803125411.28066-2-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=bgoswami@codeaurora.org \ --cc=bjorn.andersson@linaro.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=perex@perex.cz \ --cc=plai@codeaurora.org \ --cc=robh@kernel.org \ --cc=tiwai@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.