From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Chanwoo Choi <cw00.choi@samsung.com>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Sam Protsenko <semen.protsenko@linaro.org> Subject: [PATCH v2 6/8] dt-bindings: clock: samsung: convert Exynos AudSS to dtschema Date: Tue, 10 Aug 2021 11:31:43 +0200 [thread overview] Message-ID: <20210810093145.26153-7-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210810093145.26153-1-krzysztof.kozlowski@canonical.com> Convert Samsung Exynos Audio SubSystem clock controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/clock/clk-exynos-audss.txt | 103 ------------------ .../clock/samsung,exynos-audss-clock.yaml | 79 ++++++++++++++ 2 files changed, 79 insertions(+), 103 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt deleted file mode 100644 index 6030afb10b5c..000000000000 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ /dev/null @@ -1,103 +0,0 @@ -* Samsung Audio Subsystem Clock Controller - -The Samsung Audio Subsystem clock controller generates and supplies clocks -to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock -binding described here is applicable to all SoCs in Exynos family. - -Required Properties: - -- compatible: should be one of the following: - - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. - - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250 - SoCs. - - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410 - SoCs. - - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420 - SoCs. -- reg: physical base address and length of the controller's register set. - -- #clock-cells: should be 1. - -- clocks: - - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" - is used if not specified. - - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" - is used if not specified. - - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not - specified. - - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if - not specified. - - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not - specified. - -- clock-names: Aliases for the above clocks. They should be "pll_ref", - "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. - -Optional Properties: - - - power-domains: a phandle to respective power domain node as described by - generic PM domain bindings (see power/power_domain.txt for more - information). - -The following is the list of clocks generated by the controller. Each clock is -assigned an identifier and client nodes use this identifier to specify the -clock which they consume. Some of the clocks are available only on a particular -Exynos4 SoC and this is specified where applicable. - -Provided clocks: - -Clock ID SoC (if specific) ------------------------------------------------ - -mout_audss 0 -mout_i2s 1 -dout_srp 2 -dout_aud_bus 3 -dout_i2s 4 -srp_clk 5 -i2s_bus 6 -sclk_i2s 7 -pcm_bus 8 -sclk_pcm 9 -adma 10 Exynos5420 - -Example 1: An example of a clock controller node using the default input - clock names is listed below. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; -}; - -Example 2: An example of a clock controller node with the input clocks - specified. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, - <&ext_i2s_clk>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; -}; - -Example 3: I2S controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - -i2s0: i2s@3830000 { - compatible = "samsung,i2s-v5"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1", - "mout_audss", "mout_i2s"; -}; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml new file mode 100644 index 000000000000..d60b29fa22e7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos-audss-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos4210-audss-clock + - samsung,exynos5250-audss-clock + - samsung,exynos5410-audss-clock + - samsung,exynos5420-audss-clock + + clocks: + minItems: 2 + items: + - description: + Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is + used if not specified. + - description: + Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is + used if not specified. + - description: + Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not + specified. + - description: + PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not specified. + - description: + External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + + clock-names: + minItems: 2 + items: + - const: pll_ref + - const: pll_in + - const: sclk_audio + - const: sclk_pcm_in + - const: cdclk + + "#clock-cells": + const: 1 + + power-domains: true + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0c>; + #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; + }; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Chanwoo Choi <cw00.choi@samsung.com>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Sam Protsenko <semen.protsenko@linaro.org> Subject: [PATCH v2 6/8] dt-bindings: clock: samsung: convert Exynos AudSS to dtschema Date: Tue, 10 Aug 2021 11:31:43 +0200 [thread overview] Message-ID: <20210810093145.26153-7-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210810093145.26153-1-krzysztof.kozlowski@canonical.com> Convert Samsung Exynos Audio SubSystem clock controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/clock/clk-exynos-audss.txt | 103 ------------------ .../clock/samsung,exynos-audss-clock.yaml | 79 ++++++++++++++ 2 files changed, 79 insertions(+), 103 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt deleted file mode 100644 index 6030afb10b5c..000000000000 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ /dev/null @@ -1,103 +0,0 @@ -* Samsung Audio Subsystem Clock Controller - -The Samsung Audio Subsystem clock controller generates and supplies clocks -to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock -binding described here is applicable to all SoCs in Exynos family. - -Required Properties: - -- compatible: should be one of the following: - - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. - - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250 - SoCs. - - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410 - SoCs. - - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420 - SoCs. -- reg: physical base address and length of the controller's register set. - -- #clock-cells: should be 1. - -- clocks: - - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" - is used if not specified. - - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" - is used if not specified. - - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not - specified. - - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if - not specified. - - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not - specified. - -- clock-names: Aliases for the above clocks. They should be "pll_ref", - "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. - -Optional Properties: - - - power-domains: a phandle to respective power domain node as described by - generic PM domain bindings (see power/power_domain.txt for more - information). - -The following is the list of clocks generated by the controller. Each clock is -assigned an identifier and client nodes use this identifier to specify the -clock which they consume. Some of the clocks are available only on a particular -Exynos4 SoC and this is specified where applicable. - -Provided clocks: - -Clock ID SoC (if specific) ------------------------------------------------ - -mout_audss 0 -mout_i2s 1 -dout_srp 2 -dout_aud_bus 3 -dout_i2s 4 -srp_clk 5 -i2s_bus 6 -sclk_i2s 7 -pcm_bus 8 -sclk_pcm 9 -adma 10 Exynos5420 - -Example 1: An example of a clock controller node using the default input - clock names is listed below. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; -}; - -Example 2: An example of a clock controller node with the input clocks - specified. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, - <&ext_i2s_clk>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; -}; - -Example 3: I2S controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - -i2s0: i2s@3830000 { - compatible = "samsung,i2s-v5"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1", - "mout_audss", "mout_i2s"; -}; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml new file mode 100644 index 000000000000..d60b29fa22e7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos-audss-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos4210-audss-clock + - samsung,exynos5250-audss-clock + - samsung,exynos5410-audss-clock + - samsung,exynos5420-audss-clock + + clocks: + minItems: 2 + items: + - description: + Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is + used if not specified. + - description: + Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is + used if not specified. + - description: + Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not + specified. + - description: + PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not specified. + - description: + External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + + clock-names: + minItems: 2 + items: + - const: pll_ref + - const: pll_in + - const: sclk_audio + - const: sclk_pcm_in + - const: cdclk + + "#clock-cells": + const: 1 + + power-domains: true + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0c>; + #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; + }; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-10 9:32 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-10 9:31 [PATCH v2 0/8] dt-bindings: clock: samsung: convert to dtschema Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-10 9:31 ` [PATCH v2 1/8] dt-bindings: clock: samsung: convert Exynos5250 " Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-10 17:51 ` Sam Protsenko 2021-08-10 17:51 ` Sam Protsenko 2021-08-11 6:44 ` Krzysztof Kozlowski 2021-08-11 6:44 ` Krzysztof Kozlowski 2021-08-17 20:16 ` Rob Herring 2021-08-17 20:16 ` Rob Herring 2021-08-18 6:49 ` Krzysztof Kozlowski 2021-08-18 6:49 ` Krzysztof Kozlowski 2021-08-10 9:31 ` [PATCH v2 2/8] dt-bindings: clock: samsung: add bindings for Exynos external clock Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-10 17:49 ` Sam Protsenko 2021-08-10 17:49 ` Sam Protsenko 2021-08-11 6:45 ` Krzysztof Kozlowski 2021-08-11 6:45 ` Krzysztof Kozlowski 2021-08-17 20:17 ` Rob Herring 2021-08-17 20:17 ` Rob Herring 2021-08-10 9:31 ` [PATCH v2 3/8] dt-bindings: clock: samsung: convert Exynos542x to dtschema Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-17 20:21 ` Rob Herring 2021-08-17 20:21 ` Rob Herring 2021-08-18 6:53 ` Krzysztof Kozlowski 2021-08-18 6:53 ` Krzysztof Kozlowski 2021-08-10 9:31 ` [PATCH v2 4/8] dt-bindings: clock: samsung: convert Exynos3250 " Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-17 20:21 ` Rob Herring 2021-08-17 20:21 ` Rob Herring 2021-08-10 9:31 ` [PATCH v2 5/8] dt-bindings: clock: samsung: convert Exynos4 " Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-17 20:24 ` Rob Herring 2021-08-17 20:24 ` Rob Herring 2021-08-18 7:05 ` Krzysztof Kozlowski 2021-08-18 7:05 ` Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski [this message] 2021-08-10 9:31 ` [PATCH v2 6/8] dt-bindings: clock: samsung: convert Exynos AudSS " Krzysztof Kozlowski 2021-08-10 17:46 ` Sam Protsenko 2021-08-10 17:46 ` Sam Protsenko 2021-08-11 6:46 ` Krzysztof Kozlowski 2021-08-11 6:46 ` Krzysztof Kozlowski 2021-08-17 20:25 ` Rob Herring 2021-08-17 20:25 ` Rob Herring 2021-08-17 20:26 ` Rob Herring 2021-08-17 20:26 ` Rob Herring 2021-08-18 7:06 ` Krzysztof Kozlowski 2021-08-18 7:06 ` Krzysztof Kozlowski 2021-08-10 9:31 ` [PATCH v2 7/8] dt-bindings: clock: samsung: convert S5Pv210 " Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-10 9:31 ` [PATCH v2 8/8] MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry Krzysztof Kozlowski 2021-08-10 9:31 ` Krzysztof Kozlowski 2021-08-10 17:52 ` [PATCH v2 0/8] dt-bindings: clock: samsung: convert to dtschema Sam Protsenko 2021-08-10 17:52 ` Sam Protsenko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210810093145.26153-7-krzysztof.kozlowski@canonical.com \ --to=krzysztof.kozlowski@canonical.com \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@kernel.org \ --cc=semen.protsenko@linaro.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.