From: Maxime Ripard <maxime@cerno.tech>
To: roucaries.bastien@gmail.com
Cc: "Chen-Yu Tsai" <wens@csie.org>, "Chen-Yu Tsai" <wens@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Salvatore Bonaccorso" <carnil@debian.org>,
"Bastien Roucariès" <rouca@debian.org>
Subject: Re: [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
Date: Thu, 16 Sep 2021 13:03:05 +0200 [thread overview]
Message-ID: <20210916110305.ehmaspxht4nnhksg@gilmour> (raw)
In-Reply-To: <20210916081721.237137-1-rouca@debian.org>
[-- Attachment #1: Type: text/plain, Size: 766 bytes --]
Hi,
On Thu, Sep 16, 2021 at 08:17:21AM +0000, roucaries.bastien@gmail.com wrote:
> From: Bastien Roucariès <rouca@debian.org>
>
> Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
> config") sets the RX/TX delay according to the phy-mode property in the
> device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
> wrong setting.
>
> Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
> Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
> the Ethernet working again on this board.
>
> Signed-off-by: Bastien Roucariès <rouca@debian.org>
It's the third time you've sent it since yesterday, what are the
differences and which one am I supposed to apply?
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: roucaries.bastien@gmail.com
Cc: "Chen-Yu Tsai" <wens@csie.org>, "Chen-Yu Tsai" <wens@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Salvatore Bonaccorso" <carnil@debian.org>,
"Bastien Roucariès" <rouca@debian.org>
Subject: Re: [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
Date: Thu, 16 Sep 2021 13:03:05 +0200 [thread overview]
Message-ID: <20210916110305.ehmaspxht4nnhksg@gilmour> (raw)
In-Reply-To: <20210916081721.237137-1-rouca@debian.org>
[-- Attachment #1.1: Type: text/plain, Size: 766 bytes --]
Hi,
On Thu, Sep 16, 2021 at 08:17:21AM +0000, roucaries.bastien@gmail.com wrote:
> From: Bastien Roucariès <rouca@debian.org>
>
> Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
> config") sets the RX/TX delay according to the phy-mode property in the
> device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
> wrong setting.
>
> Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
> Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
> the Ethernet working again on this board.
>
> Signed-off-by: Bastien Roucariès <rouca@debian.org>
It's the third time you've sent it since yesterday, what are the
differences and which one am I supposed to apply?
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-16 11:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-16 8:17 [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode roucaries.bastien
2021-09-16 8:17 ` roucaries.bastien
2021-09-16 11:03 ` Maxime Ripard [this message]
2021-09-16 11:03 ` Maxime Ripard
2021-09-18 10:48 ` Bastien Roucariès
2021-09-24 7:31 ` (subset) " Maxime Ripard
2021-09-24 7:31 ` Maxime Ripard
-- strict thread matches above, loose matches on Subject: below --
2021-09-15 10:47 roucaries.bastien
2021-09-15 10:47 ` roucaries.bastien
2021-09-15 10:41 Bastien Roucariès
2021-09-15 10:41 ` Bastien Roucariès
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210916110305.ehmaspxht4nnhksg@gilmour \
--to=maxime@cerno.tech \
--cc=carnil@debian.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rouca@debian.org \
--cc=roucaries.bastien@gmail.com \
--cc=wens@csie.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.