From: tommy-huang <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH 5/6] HACK: drm/aspeed: Paramterise modes
Date: Tue, 28 Sep 2021 10:57:02 +0800 [thread overview]
Message-ID: <20210928025703.10909-6-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com>
From: Joel Stanley <joel@jms.id.au>
The AST2600 will run at 1024x868.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index 33095477cc03..11a44b08bd3f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -99,7 +99,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
.atomic_commit = drm_atomic_helper_commit,
};
-static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
+static int aspeed_gfx_setup_mode_config(struct drm_device *drm, int width, int height)
{
int ret;
@@ -109,8 +109,8 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
drm->mode_config.min_width = 0;
drm->mode_config.min_height = 0;
- drm->mode_config.max_width = 800;
- drm->mode_config.max_height = 600;
+ drm->mode_config.max_width = width;
+ drm->mode_config.max_height = height;
drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
return ret;
@@ -201,7 +201,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
writel(0, priv->base + CRT_CTRL1);
writel(0, priv->base + CRT_CTRL2);
- ret = aspeed_gfx_setup_mode_config(drm);
+ ret = aspeed_gfx_setup_mode_config(drm, 800, 600);
if (ret < 0)
return ret;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: tommy-huang <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH 5/6] HACK: drm/aspeed: Paramterise modes
Date: Tue, 28 Sep 2021 10:57:02 +0800 [thread overview]
Message-ID: <20210928025703.10909-6-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com>
From: Joel Stanley <joel@jms.id.au>
The AST2600 will run at 1024x868.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index 33095477cc03..11a44b08bd3f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -99,7 +99,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
.atomic_commit = drm_atomic_helper_commit,
};
-static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
+static int aspeed_gfx_setup_mode_config(struct drm_device *drm, int width, int height)
{
int ret;
@@ -109,8 +109,8 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
drm->mode_config.min_width = 0;
drm->mode_config.min_height = 0;
- drm->mode_config.max_width = 800;
- drm->mode_config.max_height = 600;
+ drm->mode_config.max_width = width;
+ drm->mode_config.max_height = height;
drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
return ret;
@@ -201,7 +201,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
writel(0, priv->base + CRT_CTRL1);
writel(0, priv->base + CRT_CTRL2);
- ret = aspeed_gfx_setup_mode_config(drm);
+ ret = aspeed_gfx_setup_mode_config(drm, 800, 600);
if (ret < 0)
return ret;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-28 2:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-28 2:56 [PATCH 0/6] *** Add AST2600 GFX node *** tommy-huang
2021-09-28 2:56 ` tommy-huang
2021-09-28 2:56 ` [PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600 tommy-huang
2021-09-28 2:56 ` tommy-huang
2021-09-28 2:56 ` [PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device tommy-huang
2021-09-28 2:56 ` tommy-huang
2021-09-28 2:57 ` [PATCH 3/6] drm/aspeed: Add AST2600 support tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-09-28 2:57 ` [PATCH 4/6] HACK: drm/aspeed: INTR_STS hadndling tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-09-28 2:57 ` tommy-huang [this message]
2021-09-28 2:57 ` [PATCH 5/6] HACK: drm/aspeed: Paramterise modes tommy-huang
2021-09-28 2:57 ` [PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-10-04 18:24 ` Rob Herring
2021-10-04 18:24 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210928025703.10909-6-tommy_huang@aspeedtech.com \
--to=tommy_huang@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=airlied@linux.ie \
--cc=andrew@aj.id.au \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.