From: Marcel Ziswiler <marcel@ziswiler.com> To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch>, Marcel Ziswiler <marcel@ziswiler.com>, Gregory Clement <gregory.clement@bootlin.com>, Russell King <linux@armlinux.org.uk>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Subject: [PATCH v2 2/3] ARM: mvebu_v7_defconfig: rebuild default configuration Date: Wed, 6 Oct 2021 08:33:20 +0200 [thread overview] Message-ID: <20211006063321.351882-3-marcel@ziswiler.com> (raw) In-Reply-To: <20211006063321.351882-1-marcel@ziswiler.com> Run "make mvebu_v7_defconfig; make savedefconfig" to rebuild mvebu_v7_defconfig This re-ordered the following configuration options: CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PCI=y CONFIG_PCI_MVEBU=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y And dropped the following nowadays obsolete configuration options: CONFIG_ZBOOT_ROM_TEXT=0x0 (default now anyway since commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0")) CONFIG_ZBOOT_ROM_BSS=0x0 (ditto) CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes in v2: - Add Andrew's reviewed-by tag. arch/arm/configs/mvebu_v7_defconfig | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 5e9a9474c93fb..7b713c083a2a7 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -5,8 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -14,13 +12,8 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y -CONFIG_PCI=y -CONFIG_PCI_MVEBU=y CONFIG_SMP=y CONFIG_HIGHMEM=y -# CONFIG_COMPACTION is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y @@ -29,6 +22,9 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_MVEBU_V7_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -40,6 +36,8 @@ CONFIG_BT=y CONFIG_BT_MRVL=y CONFIG_BT_MRVL_SDIO=y CONFIG_CFG80211=y +CONFIG_PCI=y +CONFIG_PCI_MVEBU=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y @@ -51,7 +49,6 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y @@ -147,10 +144,10 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Marcel Ziswiler <marcel@ziswiler.com> To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch>, Marcel Ziswiler <marcel@ziswiler.com>, Gregory Clement <gregory.clement@bootlin.com>, Russell King <linux@armlinux.org.uk>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Subject: [PATCH v2 2/3] ARM: mvebu_v7_defconfig: rebuild default configuration Date: Wed, 6 Oct 2021 08:33:20 +0200 [thread overview] Message-ID: <20211006063321.351882-3-marcel@ziswiler.com> (raw) In-Reply-To: <20211006063321.351882-1-marcel@ziswiler.com> Run "make mvebu_v7_defconfig; make savedefconfig" to rebuild mvebu_v7_defconfig This re-ordered the following configuration options: CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PCI=y CONFIG_PCI_MVEBU=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y And dropped the following nowadays obsolete configuration options: CONFIG_ZBOOT_ROM_TEXT=0x0 (default now anyway since commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0")) CONFIG_ZBOOT_ROM_BSS=0x0 (ditto) CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes in v2: - Add Andrew's reviewed-by tag. arch/arm/configs/mvebu_v7_defconfig | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 5e9a9474c93fb..7b713c083a2a7 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -5,8 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -14,13 +12,8 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y -CONFIG_PCI=y -CONFIG_PCI_MVEBU=y CONFIG_SMP=y CONFIG_HIGHMEM=y -# CONFIG_COMPACTION is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y @@ -29,6 +22,9 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_MVEBU_V7_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -40,6 +36,8 @@ CONFIG_BT=y CONFIG_BT_MRVL=y CONFIG_BT_MRVL_SDIO=y CONFIG_CFG80211=y +CONFIG_PCI=y +CONFIG_PCI_MVEBU=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y @@ -51,7 +49,6 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y @@ -147,10 +144,10 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-06 6:33 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-06 6:33 [PATCH v2 0/3] ARM: prepare and add netgear gs110emx support Marcel Ziswiler 2021-10-06 6:33 ` Marcel Ziswiler 2021-10-06 6:33 ` [PATCH v2 1/3] ARM: mvebu_v7_defconfig: enable mtd physmap Marcel Ziswiler 2021-10-06 6:33 ` Marcel Ziswiler 2021-10-06 6:33 ` Marcel Ziswiler [this message] 2021-10-06 6:33 ` [PATCH v2 2/3] ARM: mvebu_v7_defconfig: rebuild default configuration Marcel Ziswiler 2021-10-06 6:33 ` [PATCH v2 3/3] ARM: dts: mvebu: add device tree for netgear gs110emx switch Marcel Ziswiler 2021-10-06 6:33 ` Marcel Ziswiler 2021-10-06 21:36 ` Andrew Lunn 2021-10-06 21:36 ` Andrew Lunn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211006063321.351882-3-marcel@ziswiler.com \ --to=marcel@ziswiler.com \ --cc=andrew@lunn.ch \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.