From: Richard Henderson <richard.henderson@linaro.org> To: qemu-devel@nongnu.org Cc: alistair.francis@wdc.com, qemu-riscv@nongnu.org, zhiwei_liu@c-sky.com Subject: [PATCH v5 05/16] target/riscv: Add MXL/SXL/UXL to TB_FLAGS Date: Tue, 19 Oct 2021 08:24:27 -0700 [thread overview] Message-ID: <20211019152438.269077-6-richard.henderson@linaro.org> (raw) In-Reply-To: <20211019152438.269077-1-richard.henderson@linaro.org> Begin adding support for switching XLEN at runtime. Extract the effective XLEN from MISA and MSTATUS and store for use during translation. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- target/riscv/cpu.h | 2 ++ target/riscv/cpu.c | 8 ++++++++ target/riscv/cpu_helper.c | 33 +++++++++++++++++++++++++++++++++ target/riscv/csr.c | 3 +++ target/riscv/translate.c | 2 +- 5 files changed, 47 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index d0e82135a9..c24bc9a039 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -395,6 +395,8 @@ FIELD(TB_FLAGS, VILL, 8, 1) /* Is a Hypervisor instruction load/store allowed? */ FIELD(TB_FLAGS, HLSX, 9, 1) FIELD(TB_FLAGS, MSTATUS_HS_FS, 10, 2) +/* The combination of MXL/SXL/UXL that applies to the current cpu mode. */ +FIELD(TB_FLAGS, XL, 12, 2) #ifdef TARGET_RISCV32 #define riscv_cpu_mxl(env) ((void)(env), MXL_RV32) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index 1857670a69..4e1920d5f0 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -355,6 +355,14 @@ static void riscv_cpu_reset(DeviceState *dev) env->misa_mxl = env->misa_mxl_max; env->priv = PRV_M; env->mstatus &= ~(MSTATUS_MIE | MSTATUS_MPRV); + if (env->misa_mxl > MXL_RV32) { + /* + * The reset status of SXL/UXL is undefined, but mstatus is WARL + * and we must ensure that the value after init is valid for read. + */ + env->mstatus = set_field(env->mstatus, MSTATUS64_SXL, env->misa_mxl); + env->mstatus = set_field(env->mstatus, MSTATUS64_UXL, env->misa_mxl); + } env->mcause = 0; env->pc = env->resetvec; env->two_stage_lookup = false; diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index 403f54171d..429afd1f48 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -35,6 +35,37 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch) #endif } +static RISCVMXL cpu_get_xl(CPURISCVState *env) +{ +#if defined(TARGET_RISCV32) + return MXL_RV32; +#elif defined(CONFIG_USER_ONLY) + return MXL_RV64; +#else + RISCVMXL xl = riscv_cpu_mxl(env); + + /* + * When emulating a 32-bit-only cpu, use RV32. + * When emulating a 64-bit cpu, and MXL has been reduced to RV32, + * MSTATUSH doesn't have UXL/SXL, therefore XLEN cannot be widened + * back to RV64 for lower privs. + */ + if (xl != MXL_RV32) { + switch (env->priv) { + case PRV_M: + break; + case PRV_U: + xl = get_field(env->mstatus, MSTATUS64_UXL); + break; + default: /* PRV_S | PRV_H */ + xl = get_field(env->mstatus, MSTATUS64_SXL); + break; + } + } + return xl; +#endif +} + void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -78,6 +109,8 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, } #endif + flags = FIELD_DP32(flags, TB_FLAGS, XL, cpu_get_xl(env)); + *pflags = flags; } diff --git a/target/riscv/csr.c b/target/riscv/csr.c index 9c0753bc8b..c4a479ddd2 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -526,6 +526,9 @@ static RISCVException write_mstatus(CPURISCVState *env, int csrno, mstatus = set_field(mstatus, MSTATUS32_SD, dirty); } else { mstatus = set_field(mstatus, MSTATUS64_SD, dirty); + /* SXL and UXL fields are for now read only */ + mstatus = set_field(mstatus, MSTATUS64_SXL, MXL_RV64); + mstatus = set_field(mstatus, MSTATUS64_UXL, MXL_RV64); } env->mstatus = mstatus; diff --git a/target/riscv/translate.c b/target/riscv/translate.c index 66857732e8..f7634c175a 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -514,7 +514,6 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) #else ctx->virt_enabled = false; #endif - ctx->xl = env->misa_mxl; ctx->misa_ext = env->misa_ext; ctx->frm = -1; /* unknown rounding mode */ ctx->ext_ifencei = cpu->cfg.ext_ifencei; @@ -526,6 +525,7 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) ctx->lmul = FIELD_EX32(tb_flags, TB_FLAGS, LMUL); ctx->mlen = 1 << (ctx->sew + 3 - ctx->lmul); ctx->vl_eq_vlmax = FIELD_EX32(tb_flags, TB_FLAGS, VL_EQ_VLMAX); + ctx->xl = FIELD_EX32(tb_flags, TB_FLAGS, XL); ctx->cs = cs; ctx->w = false; ctx->ntemp = 0; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Richard Henderson <richard.henderson@linaro.org> To: qemu-devel@nongnu.org Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com, zhiwei_liu@c-sky.com Subject: [PATCH v5 05/16] target/riscv: Add MXL/SXL/UXL to TB_FLAGS Date: Tue, 19 Oct 2021 08:24:27 -0700 [thread overview] Message-ID: <20211019152438.269077-6-richard.henderson@linaro.org> (raw) In-Reply-To: <20211019152438.269077-1-richard.henderson@linaro.org> Begin adding support for switching XLEN at runtime. Extract the effective XLEN from MISA and MSTATUS and store for use during translation. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- target/riscv/cpu.h | 2 ++ target/riscv/cpu.c | 8 ++++++++ target/riscv/cpu_helper.c | 33 +++++++++++++++++++++++++++++++++ target/riscv/csr.c | 3 +++ target/riscv/translate.c | 2 +- 5 files changed, 47 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index d0e82135a9..c24bc9a039 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -395,6 +395,8 @@ FIELD(TB_FLAGS, VILL, 8, 1) /* Is a Hypervisor instruction load/store allowed? */ FIELD(TB_FLAGS, HLSX, 9, 1) FIELD(TB_FLAGS, MSTATUS_HS_FS, 10, 2) +/* The combination of MXL/SXL/UXL that applies to the current cpu mode. */ +FIELD(TB_FLAGS, XL, 12, 2) #ifdef TARGET_RISCV32 #define riscv_cpu_mxl(env) ((void)(env), MXL_RV32) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index 1857670a69..4e1920d5f0 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -355,6 +355,14 @@ static void riscv_cpu_reset(DeviceState *dev) env->misa_mxl = env->misa_mxl_max; env->priv = PRV_M; env->mstatus &= ~(MSTATUS_MIE | MSTATUS_MPRV); + if (env->misa_mxl > MXL_RV32) { + /* + * The reset status of SXL/UXL is undefined, but mstatus is WARL + * and we must ensure that the value after init is valid for read. + */ + env->mstatus = set_field(env->mstatus, MSTATUS64_SXL, env->misa_mxl); + env->mstatus = set_field(env->mstatus, MSTATUS64_UXL, env->misa_mxl); + } env->mcause = 0; env->pc = env->resetvec; env->two_stage_lookup = false; diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index 403f54171d..429afd1f48 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -35,6 +35,37 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch) #endif } +static RISCVMXL cpu_get_xl(CPURISCVState *env) +{ +#if defined(TARGET_RISCV32) + return MXL_RV32; +#elif defined(CONFIG_USER_ONLY) + return MXL_RV64; +#else + RISCVMXL xl = riscv_cpu_mxl(env); + + /* + * When emulating a 32-bit-only cpu, use RV32. + * When emulating a 64-bit cpu, and MXL has been reduced to RV32, + * MSTATUSH doesn't have UXL/SXL, therefore XLEN cannot be widened + * back to RV64 for lower privs. + */ + if (xl != MXL_RV32) { + switch (env->priv) { + case PRV_M: + break; + case PRV_U: + xl = get_field(env->mstatus, MSTATUS64_UXL); + break; + default: /* PRV_S | PRV_H */ + xl = get_field(env->mstatus, MSTATUS64_SXL); + break; + } + } + return xl; +#endif +} + void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -78,6 +109,8 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, } #endif + flags = FIELD_DP32(flags, TB_FLAGS, XL, cpu_get_xl(env)); + *pflags = flags; } diff --git a/target/riscv/csr.c b/target/riscv/csr.c index 9c0753bc8b..c4a479ddd2 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -526,6 +526,9 @@ static RISCVException write_mstatus(CPURISCVState *env, int csrno, mstatus = set_field(mstatus, MSTATUS32_SD, dirty); } else { mstatus = set_field(mstatus, MSTATUS64_SD, dirty); + /* SXL and UXL fields are for now read only */ + mstatus = set_field(mstatus, MSTATUS64_SXL, MXL_RV64); + mstatus = set_field(mstatus, MSTATUS64_UXL, MXL_RV64); } env->mstatus = mstatus; diff --git a/target/riscv/translate.c b/target/riscv/translate.c index 66857732e8..f7634c175a 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -514,7 +514,6 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) #else ctx->virt_enabled = false; #endif - ctx->xl = env->misa_mxl; ctx->misa_ext = env->misa_ext; ctx->frm = -1; /* unknown rounding mode */ ctx->ext_ifencei = cpu->cfg.ext_ifencei; @@ -526,6 +525,7 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) ctx->lmul = FIELD_EX32(tb_flags, TB_FLAGS, LMUL); ctx->mlen = 1 << (ctx->sew + 3 - ctx->lmul); ctx->vl_eq_vlmax = FIELD_EX32(tb_flags, TB_FLAGS, VL_EQ_VLMAX); + ctx->xl = FIELD_EX32(tb_flags, TB_FLAGS, XL); ctx->cs = cs; ctx->w = false; ctx->ntemp = 0; -- 2.25.1
next prev parent reply other threads:[~2021-10-19 16:37 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-19 15:24 [PATCH v5 00/16] target/riscv: Rationalize XLEN and operand length Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 01/16] target/riscv: Move cpu_get_tb_cpu_state out of line Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 02/16] target/riscv: Create RISCVMXL enumeration Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 03/16] target/riscv: Split misa.mxl and misa.ext Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 04/16] target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxl Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` Richard Henderson [this message] 2021-10-19 15:24 ` [PATCH v5 05/16] target/riscv: Add MXL/SXL/UXL to TB_FLAGS Richard Henderson 2021-10-19 15:24 ` [PATCH v5 06/16] target/riscv: Use REQUIRE_64BIT in amo_check64 Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 07/16] target/riscv: Properly check SEW in amo_op Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 08/16] target/riscv: Replace is_32bit with get_xl/get_xlen Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 09/16] target/riscv: Replace DisasContext.w with DisasContext.ol Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 10/16] target/riscv: Use gen_arith_per_ol for RVM Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 11/16] target/riscv: Adjust trans_rev8_32 for riscv64 Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 12/16] target/riscv: Use gen_unary_per_ol for RVB Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 13/16] target/riscv: Use gen_shift*_per_ol for RVB, RVI Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 14/16] target/riscv: Align gprs and fprs in cpu_dump Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 22:10 ` Alistair Francis 2021-10-19 22:10 ` Alistair Francis 2021-10-19 23:10 ` Richard Henderson 2021-10-19 23:10 ` Richard Henderson 2021-10-19 15:24 ` [PATCH v5 15/16] target/riscv: Use riscv_csrrw_debug for cpu_dump Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 22:12 ` Alistair Francis 2021-10-19 22:12 ` Alistair Francis 2021-10-19 15:24 ` [PATCH v5 16/16] target/riscv: Compute mstatus.sd on demand Richard Henderson 2021-10-19 15:24 ` Richard Henderson 2021-10-19 22:12 ` Alistair Francis 2021-10-19 22:12 ` Alistair Francis
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211019152438.269077-6-richard.henderson@linaro.org \ --to=richard.henderson@linaro.org \ --cc=alistair.francis@wdc.com \ --cc=qemu-devel@nongnu.org \ --cc=qemu-riscv@nongnu.org \ --cc=zhiwei_liu@c-sky.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.