[PATCH v3 08/12] watchdog: s3c2410: Add support for WDT counter enable register

From: Sam Protsenko <semen.protsenko@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 08/12] watchdog: s3c2410: Add support for WDT counter enable register
Date: Sun,  7 Nov 2021 22:29:39 +0200	[thread overview]
Message-ID: <20211107202943.8859-9-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20211107202943.8859-1-semen.protsenko@linaro.org>

On new Exynos chips (e.g. Exynos850) new CLUSTERx_NONCPU_OUT register is
introduced, where CNT_EN_WDT bit must be enabled to make watchdog
counter running. Add corresponding quirk and proper infrastructure to
handle that register if the quirk is set.

This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
Changes in v3:
  - Added R-b tag by Krzysztof Kozlowski

Changes in v2:
  - Used quirks instead of callbacks for all added PMU registers
  - Used BIT() macro
  - Extracted cleanup code to separate patch to minimize changes and
    ease the review and porting

 drivers/watchdog/s3c2410_wdt.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 2a61b6ea5602..ec341c876225 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -60,11 +60,13 @@
 #define QUIRK_HAS_RST_STAT			(1 << 1)
 #define QUIRK_HAS_WTCLRINT_REG			(1 << 2)
 #define QUIRK_HAS_PMU_AUTO_DISABLE		(1 << 3)
+#define QUIRK_HAS_PMU_CNT_EN			(1 << 4)
 
 /* These quirks require that we have a PMU register map */
 #define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
 						 QUIRK_HAS_RST_STAT | \
-						 QUIRK_HAS_PMU_AUTO_DISABLE)
+						 QUIRK_HAS_PMU_AUTO_DISABLE | \
+						 QUIRK_HAS_PMU_CNT_EN)
 
 static bool nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin;
@@ -98,6 +100,8 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to
  * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
  * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
  * reset.
+ * @cnt_en_reg: Offset in pmureg for the register that enables WDT counter.
+ * @cnt_en_bit: Bit number for "watchdog counter enable" in cnt_en register.
  * @quirks: A bitfield of quirks.
  */
 
@@ -108,6 +112,8 @@ struct s3c2410_wdt_variant {
 	int mask_bit;
 	int rst_stat_reg;
 	int rst_stat_bit;
+	int cnt_en_reg;
+	int cnt_en_bit;
 	u32 quirks;
 };
 
@@ -233,6 +239,20 @@ static int s3c2410wdt_mask_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
 	return ret;
 }
 
+static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en)
+{
+	const u32 mask_val = BIT(wdt->drv_data->cnt_en_bit);
+	const u32 val = en ? mask_val : 0;
+	int ret;
+
+	ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->cnt_en_reg,
+				 mask_val, val);
+	if (ret < 0)
+		dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
+
+	return ret;
+}
+
 static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
 {
 	int ret;
@@ -249,6 +269,12 @@ static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
 			return ret;
 	}
 
+	if (wdt->drv_data->quirks & QUIRK_HAS_PMU_CNT_EN) {
+		ret = s3c2410wdt_enable_counter(wdt, !mask);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

