From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Taniya Das <tdas@codeaurora.org>,
Ansuel Smith <ansuelsmth@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 06/15] drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
Date: Fri, 21 Jan 2022 00:20:19 +0100 [thread overview]
Message-ID: <20220120232028.6738-7-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220120232028.6738-1-ansuelsmth@gmail.com>
Use ARRAY_SIZE for num_parents instead of hardcoding the value.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/clk/qcom/gcc-ipq806x.c | 68 +++++++++++++++++-----------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 828383c30322..f6db7247835e 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -373,7 +373,7 @@ static struct clk_rcg gsbi1_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi1_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -424,7 +424,7 @@ static struct clk_rcg gsbi2_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi2_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -475,7 +475,7 @@ static struct clk_rcg gsbi4_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi4_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -526,7 +526,7 @@ static struct clk_rcg gsbi5_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi5_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -577,7 +577,7 @@ static struct clk_rcg gsbi6_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi6_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -628,7 +628,7 @@ static struct clk_rcg gsbi7_uart_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi7_uart_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -692,7 +692,7 @@ static struct clk_rcg gsbi1_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi1_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -743,7 +743,7 @@ static struct clk_rcg gsbi2_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi2_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -794,7 +794,7 @@ static struct clk_rcg gsbi4_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi4_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -845,7 +845,7 @@ static struct clk_rcg gsbi5_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi5_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -896,7 +896,7 @@ static struct clk_rcg gsbi6_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi6_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -947,7 +947,7 @@ static struct clk_rcg gsbi7_qup_src = {
.hw.init = &(struct clk_init_data){
.name = "gsbi7_qup_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -1099,7 +1099,7 @@ static struct clk_rcg gp0_src = {
.hw.init = &(struct clk_init_data){
.name = "gp0_src",
.parent_data = gcc_pxo_pll8_cxo,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
.ops = &clk_rcg_ops,
.flags = CLK_SET_PARENT_GATE,
},
@@ -1150,7 +1150,7 @@ static struct clk_rcg gp1_src = {
.hw.init = &(struct clk_init_data){
.name = "gp1_src",
.parent_data = gcc_pxo_pll8_cxo,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -1201,7 +1201,7 @@ static struct clk_rcg gp2_src = {
.hw.init = &(struct clk_init_data){
.name = "gp2_src",
.parent_data = gcc_pxo_pll8_cxo,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -1257,7 +1257,7 @@ static struct clk_rcg prng_src = {
.hw.init = &(struct clk_init_data){
.name = "prng_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
},
},
@@ -1321,7 +1321,7 @@ static struct clk_rcg sdc1_src = {
.hw.init = &(struct clk_init_data){
.name = "sdc1_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
},
}
@@ -1371,7 +1371,7 @@ static struct clk_rcg sdc3_src = {
.hw.init = &(struct clk_init_data){
.name = "sdc3_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
},
}
@@ -1456,7 +1456,7 @@ static struct clk_rcg tsif_ref_src = {
.hw.init = &(struct clk_init_data){
.name = "tsif_ref_src",
.parent_data = gcc_pxo_pll8,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8),
.ops = &clk_rcg_ops,
},
}
@@ -1620,7 +1620,7 @@ static struct clk_rcg pcie_ref_src = {
.hw.init = &(struct clk_init_data){
.name = "pcie_ref_src",
.parent_data = gcc_pxo_pll3,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -1714,7 +1714,7 @@ static struct clk_rcg pcie1_ref_src = {
.hw.init = &(struct clk_init_data){
.name = "pcie1_ref_src",
.parent_data = gcc_pxo_pll3,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -1808,7 +1808,7 @@ static struct clk_rcg pcie2_ref_src = {
.hw.init = &(struct clk_init_data){
.name = "pcie2_ref_src",
.parent_data = gcc_pxo_pll3,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -1907,7 +1907,7 @@ static struct clk_rcg sata_ref_src = {
.hw.init = &(struct clk_init_data){
.name = "sata_ref_src",
.parent_data = gcc_pxo_pll3,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -2048,7 +2048,7 @@ static struct clk_rcg usb30_master_clk_src = {
.hw.init = &(struct clk_init_data){
.name = "usb30_master_ref_src",
.parent_data = gcc_pxo_pll8_pll0,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -2122,7 +2122,7 @@ static struct clk_rcg usb30_utmi_clk = {
.hw.init = &(struct clk_init_data){
.name = "usb30_utmi_clk",
.parent_data = gcc_pxo_pll8_pll0,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -2196,7 +2196,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
.hw.init = &(struct clk_init_data){
.name = "usb_hs1_xcvr_src",
.parent_data = gcc_pxo_pll8_pll0,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -2262,7 +2262,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
.hw.init = &(struct clk_init_data){
.name = "usb_fs1_xcvr_src",
.parent_data = gcc_pxo_pll8_pll0,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
.ops = &clk_rcg_ops,
.flags = CLK_SET_RATE_GATE,
},
@@ -2398,7 +2398,7 @@ static struct clk_dyn_rcg gmac_core1_src = {
.hw.init = &(struct clk_init_data){
.name = "gmac_core1_src",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
},
},
@@ -2470,7 +2470,7 @@ static struct clk_dyn_rcg gmac_core2_src = {
.hw.init = &(struct clk_init_data){
.name = "gmac_core2_src",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
},
},
@@ -2542,7 +2542,7 @@ static struct clk_dyn_rcg gmac_core3_src = {
.hw.init = &(struct clk_init_data){
.name = "gmac_core3_src",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
},
},
@@ -2614,7 +2614,7 @@ static struct clk_dyn_rcg gmac_core4_src = {
.hw.init = &(struct clk_init_data){
.name = "gmac_core4_src",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
},
},
@@ -2674,7 +2674,7 @@ static struct clk_dyn_rcg nss_tcm_src = {
.hw.init = &(struct clk_init_data){
.name = "nss_tcm_src",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
},
},
@@ -2752,7 +2752,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = {
.hw.init = &(struct clk_init_data){
.name = "ubi32_core1_src_clk",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
},
@@ -2805,7 +2805,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
.hw.init = &(struct clk_init_data){
.name = "ubi32_core2_src_clk",
.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
.ops = &clk_dyn_rcg_ops,
.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
},
--
2.33.1
next prev parent reply other threads:[~2022-01-20 23:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-20 23:20 [PATCH v2 00/15] Multiple addition and improvement to ipq8064 gcc Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 01/15] dt-bindings: clock: permit additionalProprieties to qcom,gcc Ansuel Smith
2022-01-21 1:53 ` Rob Herring
2022-01-20 23:20 ` [PATCH v2 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation Ansuel Smith
2022-01-21 1:37 ` Rob Herring
2022-01-21 1:41 ` Ansuel Smith
2022-01-21 2:01 ` Rob Herring
2022-01-20 23:20 ` [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding Ansuel Smith
2022-01-21 1:37 ` Rob Herring
2022-01-21 2:04 ` Rob Herring
2022-01-21 19:07 ` Ansuel Smith
2022-01-21 19:22 ` Rob Herring
2022-01-20 23:20 ` [PATCH v2 04/15] drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0 Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 05/15] drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data Ansuel Smith
2022-01-20 23:20 ` Ansuel Smith [this message]
2022-01-20 23:20 ` [PATCH v2 07/15] drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 08/15] drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 09/15] drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 11/15] dt-bindings: clock: add ipq8064 ce5 clk define Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 12/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 13/15] dt-bindings: reset: add ipq8064 ce5 resets Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 14/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets Ansuel Smith
2022-01-20 23:20 ` [PATCH v2 15/15] ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064 Ansuel Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220120232028.6738-7-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.