All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH 14/20] hda: cs35l41: Move boost config to initialization code
Date: Thu, 3 Mar 2022 17:30:53 +0000	[thread overview]
Message-ID: <20220303173059.269657-15-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20220303173059.269657-1-tanureal@opensource.cirrus.com>

Boost configuration doesn't need to be written for
every new stream, so move it to the initialization code.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
 include/sound/cs35l41.h     | 1 +
 sound/pci/hda/cs35l41_hda.c | 9 ++++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/include/sound/cs35l41.h b/include/sound/cs35l41.h
index fbf38f32e36d..a8537bccedcf 100644
--- a/include/sound/cs35l41.h
+++ b/include/sound/cs35l41.h
@@ -661,6 +661,7 @@
 #define CS35L41_GLOBAL_EN_SHIFT		0
 #define CS35L41_BST_EN_MASK		0x0030
 #define CS35L41_BST_EN_SHIFT		4
+#define CS35L41_BST_DIS_FET_OFF		0x00
 #define CS35L41_BST_EN_DEFAULT		0x2
 #define CS35L41_AMP_EN_SHIFT		0
 #define CS35L41_AMP_EN_MASK		1
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 75c5088cb224..90c833a25599 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -25,7 +25,6 @@ static const struct reg_sequence cs35l41_hda_config[] = {
 	{ CS35L41_DAC_PCM1_SRC,		0x00000008 }, // DACPCM1_SRC = ASPRX1
 	{ CS35L41_AMP_DIG_VOL_CTRL,	0x00000000 }, // AMP_VOL_PCM  0.0 dB
 	{ CS35L41_AMP_GAIN_CTRL,	0x00000084 }, // AMP_GAIN_PCM 4.5 dB
-	{ CS35L41_PWR_CTRL2,		0x00000001 }, // AMP_EN = 1
 };
 
 static const struct reg_sequence cs35l41_hda_mute[] = {
@@ -34,7 +33,6 @@ static const struct reg_sequence cs35l41_hda_mute[] = {
 };
 
 static const struct reg_sequence cs35l41_hda_start_bst[] = {
-	{ CS35L41_PWR_CTRL2,		0x00000021 }, // BST_EN = 10, AMP_EN = 1
 	{ CS35L41_PWR_CTRL1,		0x00000001, 3000}, // set GLOBAL_EN = 1
 };
 
@@ -94,7 +92,6 @@ static const struct reg_sequence cs35l41_active_to_safe[] = {
 	{ 0x00000040,			0x00000055 },
 	{ 0x00000040,			0x000000AA },
 	{ 0x00007438,			0x00585941 },
-	{ CS35L41_PWR_CTRL2,		0x00000000 }, // AMP_EN = 0
 	{ CS35L41_PWR_CTRL1,		0x00000000 },
 	{ 0x0000742C,			0x00000009, 2000 },
 	{ 0x00007438,			0x00580941 },
@@ -144,6 +141,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
 	case HDA_GEN_PCM_ACT_OPEN:
 		ret = regmap_multi_reg_write(reg, cs35l41_hda_config,
 					     ARRAY_SIZE(cs35l41_hda_config));
+		regmap_update_bits(reg, CS35L41_PWR_CTRL2,
+				   CS35L41_AMP_EN_MASK, 1 << CS35L41_AMP_EN_SHIFT);
 		break;
 	case HDA_GEN_PCM_ACT_PREPARE:
 		if (reg_seq->prepare)
@@ -155,6 +154,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
 			ret = regmap_multi_reg_write(reg, reg_seq->cleanup, reg_seq->num_cleanup);
 		break;
 	case HDA_GEN_PCM_ACT_CLOSE:
+		regmap_update_bits(reg, CS35L41_PWR_CTRL2,
+				   CS35L41_AMP_EN_MASK, 0 << CS35L41_AMP_EN_SHIFT);
 		if (reg_seq->close)
 			ret = regmap_multi_reg_write(reg, reg_seq->close, reg_seq->num_close);
 		break;
@@ -234,6 +235,8 @@ static int cs35l41_hda_apply_properties(struct cs35l41_hda *cs35l41)
 			cs35l41->reg_seq = &cs35l41_hda_reg_seq_no_bst;
 		regmap_multi_reg_write(cs35l41->regmap, cs35l41_reset_to_safe,
 				       ARRAY_SIZE(cs35l41_reset_to_safe));
+		regmap_update_bits(cs35l41->regmap, CS35L41_PWR_CTRL2, CS35L41_BST_EN_MASK,
+				   CS35L41_BST_DIS_FET_OFF << CS35L41_BST_EN_SHIFT);
 		break;
 	default:
 		dev_err(cs35l41->dev, "Boost type %d not supported\n", hw_cfg->bst_type);
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	Lucas Tanure <tanureal@opensource.cirrus.com>,
	devicetree@vger.kernel.org
Subject: [PATCH 14/20] hda: cs35l41: Move boost config to initialization code
Date: Thu, 3 Mar 2022 17:30:53 +0000	[thread overview]
Message-ID: <20220303173059.269657-15-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20220303173059.269657-1-tanureal@opensource.cirrus.com>

Boost configuration doesn't need to be written for
every new stream, so move it to the initialization code.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
 include/sound/cs35l41.h     | 1 +
 sound/pci/hda/cs35l41_hda.c | 9 ++++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/include/sound/cs35l41.h b/include/sound/cs35l41.h
index fbf38f32e36d..a8537bccedcf 100644
--- a/include/sound/cs35l41.h
+++ b/include/sound/cs35l41.h
@@ -661,6 +661,7 @@
 #define CS35L41_GLOBAL_EN_SHIFT		0
 #define CS35L41_BST_EN_MASK		0x0030
 #define CS35L41_BST_EN_SHIFT		4
+#define CS35L41_BST_DIS_FET_OFF		0x00
 #define CS35L41_BST_EN_DEFAULT		0x2
 #define CS35L41_AMP_EN_SHIFT		0
 #define CS35L41_AMP_EN_MASK		1
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 75c5088cb224..90c833a25599 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -25,7 +25,6 @@ static const struct reg_sequence cs35l41_hda_config[] = {
 	{ CS35L41_DAC_PCM1_SRC,		0x00000008 }, // DACPCM1_SRC = ASPRX1
 	{ CS35L41_AMP_DIG_VOL_CTRL,	0x00000000 }, // AMP_VOL_PCM  0.0 dB
 	{ CS35L41_AMP_GAIN_CTRL,	0x00000084 }, // AMP_GAIN_PCM 4.5 dB
-	{ CS35L41_PWR_CTRL2,		0x00000001 }, // AMP_EN = 1
 };
 
 static const struct reg_sequence cs35l41_hda_mute[] = {
@@ -34,7 +33,6 @@ static const struct reg_sequence cs35l41_hda_mute[] = {
 };
 
 static const struct reg_sequence cs35l41_hda_start_bst[] = {
-	{ CS35L41_PWR_CTRL2,		0x00000021 }, // BST_EN = 10, AMP_EN = 1
 	{ CS35L41_PWR_CTRL1,		0x00000001, 3000}, // set GLOBAL_EN = 1
 };
 
@@ -94,7 +92,6 @@ static const struct reg_sequence cs35l41_active_to_safe[] = {
 	{ 0x00000040,			0x00000055 },
 	{ 0x00000040,			0x000000AA },
 	{ 0x00007438,			0x00585941 },
-	{ CS35L41_PWR_CTRL2,		0x00000000 }, // AMP_EN = 0
 	{ CS35L41_PWR_CTRL1,		0x00000000 },
 	{ 0x0000742C,			0x00000009, 2000 },
 	{ 0x00007438,			0x00580941 },
@@ -144,6 +141,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
 	case HDA_GEN_PCM_ACT_OPEN:
 		ret = regmap_multi_reg_write(reg, cs35l41_hda_config,
 					     ARRAY_SIZE(cs35l41_hda_config));
+		regmap_update_bits(reg, CS35L41_PWR_CTRL2,
+				   CS35L41_AMP_EN_MASK, 1 << CS35L41_AMP_EN_SHIFT);
 		break;
 	case HDA_GEN_PCM_ACT_PREPARE:
 		if (reg_seq->prepare)
@@ -155,6 +154,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
 			ret = regmap_multi_reg_write(reg, reg_seq->cleanup, reg_seq->num_cleanup);
 		break;
 	case HDA_GEN_PCM_ACT_CLOSE:
+		regmap_update_bits(reg, CS35L41_PWR_CTRL2,
+				   CS35L41_AMP_EN_MASK, 0 << CS35L41_AMP_EN_SHIFT);
 		if (reg_seq->close)
 			ret = regmap_multi_reg_write(reg, reg_seq->close, reg_seq->num_close);
 		break;
@@ -234,6 +235,8 @@ static int cs35l41_hda_apply_properties(struct cs35l41_hda *cs35l41)
 			cs35l41->reg_seq = &cs35l41_hda_reg_seq_no_bst;
 		regmap_multi_reg_write(cs35l41->regmap, cs35l41_reset_to_safe,
 				       ARRAY_SIZE(cs35l41_reset_to_safe));
+		regmap_update_bits(cs35l41->regmap, CS35L41_PWR_CTRL2, CS35L41_BST_EN_MASK,
+				   CS35L41_BST_DIS_FET_OFF << CS35L41_BST_EN_SHIFT);
 		break;
 	default:
 		dev_err(cs35l41->dev, "Boost type %d not supported\n", hw_cfg->bst_type);
-- 
2.35.1


  parent reply	other threads:[~2022-03-03 17:32 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 17:30 [PATCH 00/20] Support external boost at CS35l41 ASoC driver Lucas Tanure
2022-03-03 17:30 ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 01/20] ASoC: cs35l41: Fix GPIO2 configuration Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:01   ` Charles Keepax
2022-03-04 10:01     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 02/20] ASoC: cs35l41: Fix max number of TX channels Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:02   ` Charles Keepax
2022-03-04 10:02     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 03/20] ASoC: cs35l41: Fix DSP mbox start command and global enable order Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:02   ` Charles Keepax
2022-03-04 10:02     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 04/20] ASoC: cs35l41: Remove unnecessary param Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:02   ` Charles Keepax
2022-03-04 10:02     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 05/20] sound: cs35l41: Unify hardware configuration Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:15   ` Charles Keepax
2022-03-04 10:15     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 06/20] sound: cs35l41: Check hw_config before using it Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:17   ` Charles Keepax
2022-03-04 10:17     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 07/20] sound: cs35l41: Move cs35l41_gpio_config to shared lib Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:18   ` Charles Keepax
2022-03-04 10:18     ` Charles Keepax
2022-03-03 17:30 ` [PATCH 08/20] hda: cs35l41: Fix I2S params comments Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 09/20] hda: cs35l41: Always configure the DAI Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 10/20] hda: cs35l41: Add Boost type flag Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 11/20] hda: cs35l41: Put the device into safe mode for external boost Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 12/20] hda: cs35l41: Mute the device before shutdown Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 13/20] sound: cs35l41: Enable Internal Boost in shared lib Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-04 10:19   ` Charles Keepax
2022-03-04 10:19     ` Charles Keepax
2022-03-03 17:30 ` Lucas Tanure [this message]
2022-03-03 17:30   ` [PATCH 14/20] hda: cs35l41: Move boost config to initialization code Lucas Tanure
2022-03-03 17:30 ` [PATCH 15/20] hda: cs35l41: Remove unnecessary log Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:50   ` Mark Brown
2022-03-03 17:50     ` Mark Brown
2022-03-04 15:05     ` Lucas tanure
2022-03-04 15:05       ` Lucas tanure
2022-03-03 17:30 ` [PATCH 16/20] hda: cs35l41: Remove cs35l41_hda_reg_sequence struct Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 17/20] hda: cs35l41: Handle all external boost setups the same way Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 18/20] hda: cs35l41: Move external boost handling to lib for ASoC use Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 19/20] ASoC: cs35l41: Support external boost Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 17:30 ` [PATCH 20/20] Documentation: devicetree: CS35l41 External Boost Lucas Tanure
2022-03-03 17:30   ` Lucas Tanure
2022-03-03 18:24   ` Mark Brown
2022-03-03 18:24     ` Mark Brown
2022-03-03 19:00   ` Rob Herring
2022-03-03 19:00     ` Rob Herring
2022-03-07 20:38 ` (subset) [PATCH 00/20] Support external boost at CS35l41 ASoC driver Mark Brown
2022-03-07 20:38   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220303173059.269657-15-tanureal@opensource.cirrus.com \
    --to=tanureal@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.