All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	soc@kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH v2 1/7] ARM: dts: lan966x: swap dma channels for crypto node
Date: Fri,  4 Mar 2022 16:35:42 +0100	[thread overview]
Message-ID: <20220304153548.3364480-2-michael@walle.cc> (raw)
In-Reply-To: <20220304153548.3364480-1-michael@walle.cc>

The YAML binding (crypto/atmel,at91sam9g46-aes.yaml) mandates the order
of the channels. Swap them to pass devicetree validation.

Fixes: 290deaa10c50 ("ARM: dts: add DT for lan966 SoC and 2-port board pcb8291")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/lan966x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 7d2869648050..5e9cbc8cdcbc 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -114,9 +114,9 @@ aes: crypto@e004c000 {
 			compatible = "atmel,at91sam9g46-aes";
 			reg = <0xe004c000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
-			       <&dma0 AT91_XDMAC_DT_PERID(12)>;
-			dma-names = "rx", "tx";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
 			clocks = <&nic_clk>;
 			clock-names = "aes_clk";
 		};
-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc>
To: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	soc@kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH v2 1/7] ARM: dts: lan966x: swap dma channels for crypto node
Date: Fri,  4 Mar 2022 16:35:42 +0100	[thread overview]
Message-ID: <20220304153548.3364480-2-michael@walle.cc> (raw)
In-Reply-To: <20220304153548.3364480-1-michael@walle.cc>

The YAML binding (crypto/atmel,at91sam9g46-aes.yaml) mandates the order
of the channels. Swap them to pass devicetree validation.

Fixes: 290deaa10c50 ("ARM: dts: add DT for lan966 SoC and 2-port board pcb8291")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/lan966x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 7d2869648050..5e9cbc8cdcbc 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -114,9 +114,9 @@ aes: crypto@e004c000 {
 			compatible = "atmel,at91sam9g46-aes";
 			reg = <0xe004c000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
-			       <&dma0 AT91_XDMAC_DT_PERID(12)>;
-			dma-names = "rx", "tx";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
 			clocks = <&nic_clk>;
 			clock-names = "aes_clk";
 		};
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-03-04 15:36 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-04 15:35 [PATCH v2 0/7] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support Michael Walle
2022-03-04 15:35 ` Michael Walle
2022-03-04 15:35 ` Michael Walle [this message]
2022-03-04 15:35   ` [PATCH v2 1/7] ARM: dts: lan966x: swap dma channels for crypto node Michael Walle
2022-03-04 15:35 ` [PATCH v2 2/7] ARM: dts: lan966x: add sgpio node Michael Walle
2022-03-04 15:35   ` Michael Walle
2022-03-30 13:25   ` Claudiu.Beznea
2022-03-30 13:25     ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 3/7] ARM: dts: lan966x: add missing uart DMA channel Michael Walle
2022-03-04 15:35   ` Michael Walle
2022-03-30 13:25   ` Claudiu.Beznea
2022-03-30 13:25     ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 4/7] ARM: dts: lan966x: add all flexcom usart nodes Michael Walle
2022-03-04 15:35   ` Michael Walle
2022-03-30 13:25   ` Claudiu.Beznea
2022-03-30 13:25     ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 5/7] ARM: dts: lan966x: add flexcom SPI nodes Michael Walle
2022-03-04 15:35   ` Michael Walle
2022-03-30 13:26   ` Claudiu.Beznea
2022-03-30 13:26     ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 6/7] ARM: dts: lan966x: add flexcom I2C nodes Michael Walle
2022-03-04 15:35   ` Michael Walle
2022-03-30 13:26   ` Claudiu.Beznea
2022-03-30 13:26     ` Claudiu.Beznea
2022-03-04 15:35 ` [PATCH v2 7/7] ARM: dts: lan966x: add basic Kontron KSwitch D10 support Michael Walle
2022-03-04 15:35   ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220304153548.3364480-2-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=claudiu.beznea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kavyasree.kotagiri@microchip.com \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.