All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kernel@collabora.com, linux-media@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v1 14/24] media: rkvdec: h264: Fix dpb_valid implementation
Date: Mon, 28 Mar 2022 15:59:26 -0400	[thread overview]
Message-ID: <20220328195936.82552-15-nicolas.dufresne@collabora.com> (raw)
In-Reply-To: <20220328195936.82552-1-nicolas.dufresne@collabora.com>

The ref builder only provided reference that are marked as valid in the
dpb.  Thus the current implementation of dpb_valid would always set the
flag to 1.  This is not representing missing frames (this is called
'non-existing' pictures in the spec). In some context, these non-existing
pictures still need occupy a slot in the reference list according to the
spec.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 33 ++++++++++++++++------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 842d8cd80e90..db1e762baee5 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -112,6 +112,7 @@ struct rkvdec_h264_run {
 	const struct v4l2_ctrl_h264_sps *sps;
 	const struct v4l2_ctrl_h264_pps *pps;
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
+	int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
 };
 
 struct rkvdec_h264_ctx {
@@ -725,6 +726,26 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 	}
 }
 
+static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
+			       struct rkvdec_h264_run *run)
+{
+	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+		struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+		const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
+		struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
+		int buf_idx = -1;
+
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+			buf_idx = vb2_find_timestamp(cap_q,
+						     dpb[i].reference_ts, 0);
+
+		run->ref_buf_idx[i] = buf_idx;
+	}
+}
+
 static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 			    struct rkvdec_h264_run *run)
 {
@@ -762,7 +783,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 
 	for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
 		for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
-			u8 dpb_valid = 0;
+			u8 dpb_valid = run->ref_buf_idx[i] >= 0;
 			u8 idx = 0;
 
 			switch (j) {
@@ -779,8 +800,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 
 			if (idx >= ARRAY_SIZE(dec_params->dpb))
 				continue;
-			dpb_valid = !!(dpb[idx].flags &
-				       V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);
 
 			set_ps_field(hw_rps, DPB_INFO(i, j),
 				     idx | dpb_valid << 4);
@@ -859,13 +878,8 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
 	    unsigned int dpb_idx)
 {
 	struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
-	const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
 	struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
-	int buf_idx = -1;
-
-	if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
-		buf_idx = vb2_find_timestamp(cap_q,
-					     dpb[dpb_idx].reference_ts, 0);
+	int buf_idx = run->ref_buf_idx[dpb_idx];
 
 	/*
 	 * If a DPB entry is unused or invalid, address of current destination
@@ -1102,6 +1116,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 
 	assemble_hw_scaling_list(ctx, &run);
 	assemble_hw_pps(ctx, &run);
+	lookup_ref_buf_idx(ctx, &run);
 	assemble_hw_rps(ctx, &run);
 	config_registers(ctx, &run);
 
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kernel@collabora.com, linux-media@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v1 14/24] media: rkvdec: h264: Fix dpb_valid implementation
Date: Mon, 28 Mar 2022 15:59:26 -0400	[thread overview]
Message-ID: <20220328195936.82552-15-nicolas.dufresne@collabora.com> (raw)
In-Reply-To: <20220328195936.82552-1-nicolas.dufresne@collabora.com>

The ref builder only provided reference that are marked as valid in the
dpb.  Thus the current implementation of dpb_valid would always set the
flag to 1.  This is not representing missing frames (this is called
'non-existing' pictures in the spec). In some context, these non-existing
pictures still need occupy a slot in the reference list according to the
spec.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 33 ++++++++++++++++------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 842d8cd80e90..db1e762baee5 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -112,6 +112,7 @@ struct rkvdec_h264_run {
 	const struct v4l2_ctrl_h264_sps *sps;
 	const struct v4l2_ctrl_h264_pps *pps;
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
+	int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
 };
 
 struct rkvdec_h264_ctx {
@@ -725,6 +726,26 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 	}
 }
 
+static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
+			       struct rkvdec_h264_run *run)
+{
+	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+		struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+		const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
+		struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
+		int buf_idx = -1;
+
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+			buf_idx = vb2_find_timestamp(cap_q,
+						     dpb[i].reference_ts, 0);
+
+		run->ref_buf_idx[i] = buf_idx;
+	}
+}
+
 static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 			    struct rkvdec_h264_run *run)
 {
@@ -762,7 +783,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 
 	for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
 		for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
-			u8 dpb_valid = 0;
+			u8 dpb_valid = run->ref_buf_idx[i] >= 0;
 			u8 idx = 0;
 
 			switch (j) {
@@ -779,8 +800,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 
 			if (idx >= ARRAY_SIZE(dec_params->dpb))
 				continue;
-			dpb_valid = !!(dpb[idx].flags &
-				       V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);
 
 			set_ps_field(hw_rps, DPB_INFO(i, j),
 				     idx | dpb_valid << 4);
@@ -859,13 +878,8 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
 	    unsigned int dpb_idx)
 {
 	struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
-	const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
 	struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
-	int buf_idx = -1;
-
-	if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
-		buf_idx = vb2_find_timestamp(cap_q,
-					     dpb[dpb_idx].reference_ts, 0);
+	int buf_idx = run->ref_buf_idx[dpb_idx];
 
 	/*
 	 * If a DPB entry is unused or invalid, address of current destination
@@ -1102,6 +1116,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 
 	assemble_hw_scaling_list(ctx, &run);
 	assemble_hw_pps(ctx, &run);
+	lookup_ref_buf_idx(ctx, &run);
 	assemble_hw_rps(ctx, &run);
 	config_registers(ctx, &run);
 
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2022-03-28 20:00 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-28 19:59 [PATCH v1 00/24] H.264 Field Decoding Support for Frame-based Decoders Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 01/24] media: h264: Increase reference lists size to 32 Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29  8:25   ` Sebastian Fricke
2022-03-29  8:25     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 02/24] media: doc: Document dual use of H.264 pic_num/frame_num Nicolas Dufresne
2022-03-29  8:32   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 03/24] media: h264: Avoid wrapping long_term_frame_idx Nicolas Dufresne
2022-03-29  8:35   ` Sebastian Fricke
2022-03-31 16:28     ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 04/24] media: h264: Store current picture fields Nicolas Dufresne
2022-03-29  9:07   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 05/24] media: h264: Store all fields into the unordered list Nicolas Dufresne
2022-03-29 12:57   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 06/24] media: v4l2: Trace calculated p/b0/b1 initial reflist Nicolas Dufresne
2022-03-29 15:08   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 07/24] media: h264: Sort p/b reflist using frame_num Nicolas Dufresne
2022-03-29 13:34   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 08/24] media: v4l2: Reorder field reflist Nicolas Dufresne
2022-03-29 13:54   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 09/24] media: v4l2-mem2mem: Fix typo in trace message Nicolas Dufresne
2022-03-29 13:57   ` Sebastian Fricke
2022-03-30 14:57     ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 10/24] media: v4l2-mem2mem: Trace on implicit un-hold Nicolas Dufresne
2022-03-29 13:58   ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 11/24] media: videobuf2-v4l2: Warn on holding buffers without support Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 12/24] media: rkvdec: Stop overclocking the decoder Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29 15:15   ` Sebastian Fricke
2022-03-29 15:15     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 13/24] media: rkvdec: h264: Fix reference frame_num wrap for second field Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29 15:17   ` Sebastian Fricke
2022-03-29 15:17     ` Sebastian Fricke
2022-03-28 19:59 ` Nicolas Dufresne [this message]
2022-03-28 19:59   ` [PATCH v1 14/24] media: rkvdec: h264: Fix dpb_valid implementation Nicolas Dufresne
2022-03-29 15:27   ` Sebastian Fricke
2022-03-29 15:27     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 15/24] media: rkvdec: Enable capture buffer holding for H264 Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29 15:34   ` Sebastian Fricke
2022-03-29 15:34     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 16/24] media: rkvdec: Ensure decoded resolution fit coded resolution Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29 15:39   ` Sebastian Fricke
2022-03-29 15:39     ` Sebastian Fricke
2022-03-30  9:06     ` Sebastian Fricke
2022-03-30  9:06       ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 17/24] media: rkvdec: h264: Validate and use pic width and height in mbs Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  6:48   ` Sebastian Fricke
2022-03-30  6:48     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 18/24] media: rkvdec: h264: Fix bit depth wrap in pps packet Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  6:59   ` Sebastian Fricke
2022-03-30  6:59     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 19/24] media: rkvdec-h264: Add field decoding support Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29  8:13   ` Dan Carpenter
2022-03-29  8:13     ` Dan Carpenter
2022-03-29 20:54     ` Nicolas Dufresne
2022-03-29 20:54       ` Nicolas Dufresne
2022-03-30  5:15       ` Dan Carpenter
2022-03-30  5:15         ` Dan Carpenter
2022-03-30 13:39         ` Nicolas Dufresne
2022-03-30 13:39           ` Nicolas Dufresne
2022-03-30 15:16           ` Dan Carpenter
2022-03-30 15:16             ` Dan Carpenter
2022-03-31 13:40             ` Nicolas Dufresne
2022-03-31 13:40               ` Nicolas Dufresne
2022-03-30  7:10   ` Sebastian Fricke
2022-03-30  7:10     ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 20/24] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  7:36   ` Sebastian Fricke
2022-03-30  7:36     ` Sebastian Fricke
2022-03-31 18:25     ` Nicolas Dufresne
2022-03-31 18:25       ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 21/24] media: hantro: Stop using H.264 parameter pic_num Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  7:42   ` Sebastian Fricke
2022-03-30  7:42     ` Sebastian Fricke
2022-03-30 15:08     ` Nicolas Dufresne
2022-03-30 15:08       ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 22/24] media: hantro: h264: Make dpb entry management more robust Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  7:59   ` Sebastian Fricke
2022-03-30  7:59     ` Sebastian Fricke
2022-03-30 15:15     ` Nicolas Dufresne
2022-03-30 15:15       ` Nicolas Dufresne
2022-03-30 23:43       ` Ezequiel Garcia
2022-03-30 23:43         ` Ezequiel Garcia
2022-03-31  6:54         ` Sebastian Fricke
2022-03-31  6:54           ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 23/24] media: hantro: Add H.264 field decoding support Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-30  9:03   ` Sebastian Fricke
2022-03-30  9:03     ` Sebastian Fricke
2022-03-30 15:25     ` Nicolas Dufresne
2022-03-30 15:25       ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 24/24] media: rkvdec-h264: Don't hardcode SPS/PPS parameters Nicolas Dufresne
2022-03-28 19:59   ` Nicolas Dufresne
2022-03-29  7:22   ` Sebastian Fricke
2022-03-29  7:22     ` Sebastian Fricke
2022-03-30 15:27     ` Nicolas Dufresne
2022-03-30 15:27       ` Nicolas Dufresne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220328195936.82552-15-nicolas.dufresne@collabora.com \
    --to=nicolas.dufresne@collabora.com \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.