[PATCH 05/12] ARM: ep93xx: multiplatform support

From: Arnd Bergmann <arnd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Hartley Sweeten <hsweeten@visionengravers.com>,
	Alexander Sverdlin <alexander.sverdlin@gmail.com>,
	Hubert Feurstein <hubert.feurstein@contec.at>,
	Lukasz Majewski <lukma@denx.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Simtec Linux Team <linux@simtec.co.uk>,
	Liviu Dudau <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Ard Biesheuvel <ardb@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH 05/12] ARM: ep93xx: multiplatform support
Date: Tue,  5 Apr 2022 11:17:43 +0200	[thread overview]
Message-ID: <20220405091750.3076973-6-arnd@kernel.org> (raw)
In-Reply-To: <20220405091750.3076973-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

With the clock support and the interrupts out of the way, ep93xx can be
compiled into the same kernel image as the other ARMv4/v5 platforms. The
last obstacle are the two workarounds for broken boot loaders that
require us to re-initialize the ethernet controller and/or the watchdog
on certain machines.

Move this code into the decompressor sources directly, checking for
each possibly affected machine individually.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                              | 16 -----
 .../compressed/misc-ep93xx.h}                 | 69 +++++++++----------
 arch/arm/boot/compressed/misc.c               |  4 ++
 arch/arm/configs/ep93xx_defconfig             |  2 +
 arch/arm/mach-ep93xx/Kconfig                  | 12 ++++
 5 files changed, 51 insertions(+), 52 deletions(-)
 rename arch/arm/{mach-ep93xx/include/mach/uncompress.h => boot/compressed/misc-ep93xx.h} (51%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5177e54cc14c..2bd611beefe1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -347,22 +347,6 @@ config ARCH_MULTIPLATFORM
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GPIOLIB
-	select COMMON_CLK
-	select IRQ_DOMAIN
-	select SPARSE_IRQ
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/boot/compressed/misc-ep93xx.h
similarity index 51%
rename from arch/arm/mach-ep93xx/include/mach/uncompress.h
rename to arch/arm/boot/compressed/misc-ep93xx.h
index e20bcab702b2..3dc942589cba 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -1,54 +1,25 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/mach-ep93xx/include/mach/uncompress.h
- *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  */
 
 #include <asm/mach-types.h>
 
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
+static inline unsigned int __raw_readl(unsigned int ptr)
 {
 	return *((volatile unsigned int *)ptr);
 }
 
-static void __raw_writeb(unsigned char value, unsigned int ptr)
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
 {
 	*((volatile unsigned char *)ptr) = value;
 }
 
-static void __raw_writel(unsigned int value, unsigned int ptr)
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
 {
 	*((volatile unsigned int *)ptr) = value;
 }
 
-#define PHYS_UART_DATA		(CONFIG_DEBUG_UART_PHYS + 0x00)
-#define PHYS_UART_FLAG		(CONFIG_DEBUG_UART_PHYS + 0x18)
-#define UART_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 10000; i++) {
-		/* Transmit fifo not full? */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
 /*
  * Some bootloaders don't turn off DMA from the ethernet MAC before
  * jumping to linux, which means that we might end up with bits of RX
@@ -58,7 +29,7 @@ static inline void flush(void)
 #define PHYS_ETH_SELF_CTL		0x80010020
 #define ETH_SELF_CTL_RESET		0x00000001
 
-static void ethernet_reset(void)
+static inline void ep93xx_ethernet_reset(void)
 {
 	unsigned int v;
 
@@ -75,15 +46,41 @@ static void ethernet_reset(void)
 #define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 #define TS72XX_WDT_FEED_VAL		0x05
 
-static void __maybe_unused ts72xx_watchdog_disable(void)
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
 {
 	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
 	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
 }
 
-static void arch_decomp_setup(void)
+static inline void ep93xx_decomp_setup(void)
 {
 	if (machine_is_ts72xx())
 		ts72xx_watchdog_disable();
-	ethernet_reset();
+
+	if (machine_is_adssphere() ||
+	    machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_gesbc9312() ||
+	    machine_is_micro9() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9s() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9s() ||
+	    machine_is_sim_one() ||
+	    machine_is_snapper_cl15() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
 }
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index c3c66ff2d696..cb2e069dc73f 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,6 +23,7 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#include "misc-ep93xx.h"
 
 static void putstr(const char *ptr);
 
@@ -143,6 +144,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 88d5ecc2121e..fef802b7af8c 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -11,6 +11,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_EP93XX=y
 CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 15c68a646d51..aa502ab57404 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -1,4 +1,16 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_EP93XX
+	bool "EP93xx-based"
+	depends on ARCH_MULTI_V4T
+	select ARCH_SPARSEMEM_ENABLE
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_MMIO
+	select CPU_ARM920T
+	select GPIOLIB
+	help
+	  This enables support for the Cirrus EP93xx series of CPUs.
+
 if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
