[PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions

From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Sergio Paracuellos <sergio.paracuellos@gmail.com>,
	Luiz Angelo Daros de Luca <luizluca@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: erkin.bozoglu@xeront.com, "Arınç ÜNAL" <arinc.unal@arinc9.com>,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-mips@vger.kernel.org
Subject: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
Date: Wed, 13 Apr 2022 09:07:25 +0300	[thread overview]
Message-ID: <20220413060729.27639-11-arinc.unal@arinc9.com> (raw)
In-Reply-To: <20220413060729.27639-1-arinc.unal@arinc9.com>

Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
This is the binding for the Ralink RT2880 pinctrl subdriver.

Current pin group and function bindings are for MT7621. Put bindings for
RT2880 instead.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)
 rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)

diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
similarity index 56%
rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index 9de8b0c075e2..c657bbf9fdda 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -1,21 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ralink rt2880 pinmux controller
+title: Ralink RT2880 Pin Controller
 
 maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
 
 description:
-  The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
+  Ralink RT2880 pin controller for RT2880 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing indiviual pins
   is not supported. There is no pinconf support.
 
 properties:
   compatible:
-    const: ralink,rt2880-pinmux
+    const: ralink,rt2880-pinctrl
 
 patternProperties:
   '-pins$':
@@ -28,14 +30,12 @@ patternProperties:
 
         properties:
           groups:
-            description: Name of the pin group to use for the functions.
-            enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
-                   uart1, uart2, uart3, wdt]
+            description: The pin group to select.
+            enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
           function:
-            description: The mux function to select
-            enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
-                   pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
-                   spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+            description: The mux function to select.
+            enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
 
         required:
           - groups
@@ -57,7 +57,7 @@ examples:
   # Pinmux controller node
   - |
     pinctrl {
-      compatible = "ralink,rt2880-pinmux";
+      compatible = "ralink,rt2880-pinctrl";
 
       i2c_pins: i2c0-pins {
         pinmux {
-- 
2.25.1

