[PATCH v6 15/21] KVM: s390: pci: add routines to start/stop interpretive execution

From: Matthew Rosato <mjrosato@linux.ibm.com>
To: linux-s390@vger.kernel.org
Cc: alex.williamson@redhat.com, cohuck@redhat.com,
	schnelle@linux.ibm.com, farman@linux.ibm.com,
	pmorel@linux.ibm.com, borntraeger@linux.ibm.com,
	hca@linux.ibm.com, gor@linux.ibm.com,
	gerald.schaefer@linux.ibm.com, agordeev@linux.ibm.com,
	svens@linux.ibm.com, frankja@linux.ibm.com, david@redhat.com,
	imbrenda@linux.ibm.com, vneethv@linux.ibm.com,
	oberpar@linux.ibm.com, freude@linux.ibm.com, thuth@redhat.com,
	pasic@linux.ibm.com, pbonzini@redhat.com, corbet@lwn.net,
	jgg@nvidia.com, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v6 15/21] KVM: s390: pci: add routines to start/stop interpretive execution
Date: Tue, 26 Apr 2022 16:08:36 -0400	[thread overview]
Message-ID: <20220426200842.98655-16-mjrosato@linux.ibm.com> (raw)
In-Reply-To: <20220426200842.98655-1-mjrosato@linux.ibm.com>

These routines will be invoked at the time an s390x vfio-pci device is
associated with a KVM (or when the association is removed), allowing
the zPCI device to enable or disable load/store intepretation mode;
this requires the host zPCI device to inform firmware of the unique
token (GISA designation) that is associated with the owning KVM.

Furthemore, add/remove these devices from a list associated with the
kvm and ensure proper cleanup always occurs during vm exit.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
 arch/s390/include/asm/kvm_host.h |  13 +++
 arch/s390/kvm/kvm-s390.c         |   9 ++
 arch/s390/kvm/pci.c              | 158 +++++++++++++++++++++++++++++++
 arch/s390/kvm/pci.h              |   5 +
 arch/s390/pci/pci.c              |   3 +
 5 files changed, 188 insertions(+)

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 8e381603b6a7..cd58f204305e 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -19,6 +19,7 @@
 #include <linux/kvm.h>
 #include <linux/seqlock.h>
 #include <linux/module.h>
+#include <linux/pci.h>
 #include <asm/debug.h>
 #include <asm/cpu.h>
 #include <asm/fpu/api.h>
@@ -967,6 +968,8 @@ struct kvm_arch{
 	DECLARE_BITMAP(idle_mask, KVM_MAX_VCPUS);
 	struct kvm_s390_gisa_interrupt gisa_int;
 	struct kvm_s390_pv pv;
+	struct list_head kzdev_list;
+	spinlock_t kzdev_list_lock;
 };
 
 #define KVM_HVA_ERR_BAD		(-1UL)
@@ -1017,4 +1020,14 @@ static inline void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
 
+#ifdef CONFIG_PCI
+int kvm_s390_pci_register_kvm(struct zpci_dev *zdev, struct kvm *kvm);
+#else
+static inline int kvm_s390_pci_register_kvm(struct zpci_dev *dev,
+					    struct kvm *kvm)
+{
+	return -EPERM;
+}
+#endif
+
 #endif
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 504f312c1c27..bd6c8aeabc24 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -2866,6 +2866,13 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 
 	kvm_s390_crypto_init(kvm);
 
+	if (IS_ENABLED(CONFIG_VFIO_PCI)) {
+		mutex_lock(&kvm->lock);
+		kvm_s390_pci_init_list(kvm);
+		kvm_s390_vcpu_pci_enable_interp(kvm);
+		mutex_unlock(&kvm->lock);
+	}
+
 	mutex_init(&kvm->arch.float_int.ais_lock);
 	spin_lock_init(&kvm->arch.float_int.lock);
 	for (i = 0; i < FIRQ_LIST_COUNT; i++)
@@ -2951,6 +2958,8 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (!kvm_is_ucontrol(kvm))
 		gmap_remove(kvm->arch.gmap);
 	kvm_s390_destroy_adapters(kvm);
+	if (IS_ENABLED(CONFIG_VFIO_PCI))
+		kvm_s390_pci_clear_list(kvm);
 	kvm_s390_clear_float_irqs(kvm);
 	kvm_s390_vsie_destroy(kvm);
 	KVM_EVENT(3, "vm 0x%pK destroyed", kvm);
diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c
index 72a9c6bfae86..2aee7f11db1d 100644
--- a/arch/s390/kvm/pci.c
+++ b/arch/s390/kvm/pci.c
@@ -12,7 +12,9 @@
 #include <asm/pci.h>
 #include <asm/pci_insn.h>
 #include <asm/pci_io.h>
+#include <asm/sclp.h>
 #include "pci.h"
+#include "kvm-s390.h"
 
 struct zpci_aift *aift;
 
@@ -424,6 +426,162 @@ void kvm_s390_pci_dev_release(struct zpci_dev *zdev)
 }
 EXPORT_SYMBOL_GPL(kvm_s390_pci_dev_release);
 
+static inline int register_kvm(struct zpci_dev *zdev, struct kvm *kvm)
+{
+	int rc;
+
+	if (zdev->kzdev || zdev->gisa != 0)
+		return -EINVAL;
+
+	mutex_lock(&kvm->lock);
+
+	rc = kvm_s390_pci_dev_open(zdev);
+	if (rc)
+		goto err;
+
+	/*
+	 * If interpretation facilities aren't available, add the device to
+	 * the kzdev list but don't enable for interpretation.
+	 */
+	if (!kvm_s390_pci_interp_allowed())
+		goto out;
+
+	/*
+	 * If this is the first request to use an interpreted device, make the
+	 * necessary vcpu changes
+	 */
+	if (!kvm->arch.use_zpci_interp)
+		kvm_s390_vcpu_pci_enable_interp(kvm);
+
+	if (zdev_enabled(zdev)) {
+		rc = zpci_disable_device(zdev);
+		if (rc)
+			goto err;
+	}
+
+	/*
+	 * Store information about the identity of the kvm guest allowed to
+	 * access this device via interpretation to be used by host CLP
+	 */
+	zdev->gisa = (u32)virt_to_phys(&kvm->arch.sie_page2->gisa);
+
+	rc = zpci_enable_device(zdev);
+	if (rc)
+		goto clear_gisa;
+
+	/* Re-register the IOMMU that was already created */
+	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+				virt_to_phys(zdev->dma_table));
+	if (rc)
+		goto clear_gisa;
+
+out:
+	zdev->kzdev->kvm = kvm;
+
+	spin_lock(&kvm->arch.kzdev_list_lock);
+	list_add_tail(&zdev->kzdev->entry, &kvm->arch.kzdev_list);
+	spin_unlock(&kvm->arch.kzdev_list_lock);
+
+	mutex_unlock(&kvm->lock);
+	return 0;
+
+clear_gisa:
+	zdev->gisa = 0;
+err:
+	if (zdev->kzdev)
+		kvm_s390_pci_dev_release(zdev);
+	mutex_unlock(&kvm->lock);
+	return rc;
+}
+
+static inline int unregister_kvm(struct zpci_dev *zdev)
+{
+	struct kvm *kvm;
+	int rc;
+
+	if (!zdev->kzdev)
+		return -EINVAL;
+
+	kvm = zdev->kzdev->kvm;
+	mutex_lock(&kvm->lock);
+
+	/*
+	 * A 0 gisa means interpretation was never enabled, just remove the
+	 * device from the list.
+	 */
+	if (zdev->gisa == 0)
+		goto out;
+
+	/* Forwarding must be turned off before interpretation */
+	if (zdev->kzdev->fib.fmt0.aibv != 0)
+		kvm_s390_pci_aif_disable(zdev, true);
+
+	/* Remove the host CLP guest designation */
+	zdev->gisa = 0;
+
+	if (zdev_enabled(zdev)) {
+		rc = zpci_disable_device(zdev);
+		if (rc)
+			goto out;
+	}
+
+	rc = zpci_enable_device(zdev);
+	if (rc)
+		goto out;
+
+	/* Re-register the IOMMU that was already created */
+	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+				virt_to_phys(zdev->dma_table));
+
+out:
+	spin_lock(&kvm->arch.kzdev_list_lock);
+	list_del(&zdev->kzdev->entry);
+	spin_unlock(&kvm->arch.kzdev_list_lock);
+	kvm_s390_pci_dev_release(zdev);
+
+	mutex_unlock(&kvm->lock);
+
+	return rc;
+}
+
+int kvm_s390_pci_register_kvm(struct zpci_dev *zdev, struct kvm *kvm)
+{
+	if (!zdev)
+		return 0;
+
+	/*
+	 * Register device with this KVM (or remove the KVM association if 0).
+	 * If interpetation facilities are available, enable them and let
+	 * userspace indicate whether or not they will be used (specify SHM bit
+	 * to disable).
+	 */
+	if (kvm)
+		return register_kvm(zdev, kvm);
+	else
+		return unregister_kvm(zdev);
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_register_kvm);
+
+void kvm_s390_pci_init_list(struct kvm *kvm)
+{
+	spin_lock_init(&kvm->arch.kzdev_list_lock);
+	INIT_LIST_HEAD(&kvm->arch.kzdev_list);
+}
+
+void kvm_s390_pci_clear_list(struct kvm *kvm)
+{
+	struct kvm_zdev *tmp, *kzdev;
+	LIST_HEAD(remove);
+
+	spin_lock(&kvm->arch.kzdev_list_lock);
+	list_for_each_entry_safe(kzdev, tmp, &kvm->arch.kzdev_list, entry)
+		list_move_tail(&kzdev->entry, &remove);
+	spin_unlock(&kvm->arch.kzdev_list_lock);
+
+	list_for_each_entry_safe(kzdev, tmp, &remove, entry)
+		unregister_kvm(kzdev->zdev);
+}
+
 int kvm_s390_pci_init(void)
 {
 	aift = kzalloc(sizeof(struct zpci_aift), GFP_KERNEL);
diff --git a/arch/s390/kvm/pci.h b/arch/s390/kvm/pci.h
index f567c3189a40..d11662fadb78 100644
--- a/arch/s390/kvm/pci.h
+++ b/arch/s390/kvm/pci.h
@@ -13,6 +13,7 @@
 #include <linux/kvm_host.h>
 #include <linux/pci.h>
 #include <linux/mutex.h>
+#include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <asm/airq.h>
 #include <asm/cpu.h>
@@ -21,6 +22,7 @@ struct kvm_zdev {
 	struct zpci_dev *zdev;
 	struct kvm *kvm;
 	struct zpci_fib fib;
+	struct list_head entry;
 };
 
 struct zpci_gaite {
@@ -54,6 +56,9 @@ static inline struct kvm *kvm_s390_pci_si_to_kvm(struct zpci_aift *aift,
 int kvm_s390_pci_aen_init(u8 nisc);
 void kvm_s390_pci_aen_exit(void);
 
+void kvm_s390_pci_init_list(struct kvm *kvm);
+void kvm_s390_pci_clear_list(struct kvm *kvm);
+
 int kvm_s390_pci_init(void);
 void kvm_s390_pci_exit(void);
 
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index f0a439c43395..d9b021fb84d5 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -132,6 +132,7 @@ int zpci_register_ioat(struct zpci_dev *zdev, u8 dmaas,
 		zpci_dbg(3, "reg ioat fid:%x, cc:%d, status:%d\n", zdev->fid, cc, status);
 	return cc;
 }
+EXPORT_SYMBOL_GPL(zpci_register_ioat);
 
 /* Modify PCI: Unregister I/O address translation parameters */
 int zpci_unregister_ioat(struct zpci_dev *zdev, u8 dmaas)
@@ -712,6 +713,7 @@ int zpci_enable_device(struct zpci_dev *zdev)
 		zpci_update_fh(zdev, fh);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(zpci_enable_device);
 
 int zpci_disable_device(struct zpci_dev *zdev)
 {
@@ -735,6 +737,7 @@ int zpci_disable_device(struct zpci_dev *zdev)
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(zpci_disable_device);
 
 /**
  * zpci_hot_reset_device - perform a reset of the given zPCI function
-- 
2.27.0

