From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Luca Weiss <luca@z3ntu.xyz>, David Heidelberg <david@ixit.cz>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 05/11] arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema
Date: Sat, 7 May 2022 21:49:07 +0200 [thread overview]
Message-ID: <20220507194913.261121-6-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix. Optional children should be either 'pinconf' or
followed with '-pins' suffix. This fixes dtbs_check warnings like:
sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 10 +--
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 16 ++---
.../qcom/msm8916-samsung-a2015-common.dtsi | 2 +-
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +--
.../dts/qcom/msm8996-sony-xperia-tone.dtsi | 70 +++++++++----------
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 8 +--
.../boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 6 +-
.../dts/qcom/msm8998-oneplus-cheeseburger.dts | 2 +-
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 2 +-
.../msm8998-sony-xperia-yoshino-maple.dts | 2 +-
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 12 ++--
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 4 +-
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 2 +-
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 6 +-
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +-
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
22 files changed, 86 insertions(+), 86 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 7c1eab605c15..79254841715b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -773,7 +773,7 @@ &pm8916_gpios {
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
- usb_hub_reset_pm: usb-hub-reset-pm {
+ usb_hub_reset_pm: usb-hub-reset-pm-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -781,14 +781,14 @@ usb_hub_reset_pm: usb-hub-reset-pm {
output-high;
};
- usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+ usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
- usb_sw_sel_pm: usb-sw-sel-pm {
+ usb_sw_sel_pm: usb-sw-sel-pm-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -797,7 +797,7 @@ usb_sw_sel_pm: usb-sw-sel-pm {
output-high;
};
- usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+ usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -806,7 +806,7 @@ usb_sw_sel_pm_device: usb-sw-sel-pm-device {
output-low;
};
- pm8916_gpios_leds: pm8916-gpios-leds {
+ pm8916_gpios_leds: pm8916-gpios-leds-state {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 49afbb1a066a..e0e965f4dd2f 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -555,7 +555,7 @@ &pm8994_gpios {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
- ls_exp_gpio_f: pm8994_gpio5 {
+ ls_exp_gpio_f: pm8994-gpio5-state {
pinconf {
pins = "gpio5";
output-low;
@@ -563,7 +563,7 @@ pinconf {
};
};
- bt_en_gpios: bt_en_gpios {
+ bt_en_gpios: bt-en-pios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -574,7 +574,7 @@ pinconf {
};
};
- wlan_en_gpios: wlan_en_gpios {
+ wlan_en_gpios: wlan-en-gpios-state {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -585,7 +585,7 @@ pinconf {
};
};
- audio_mclk: clk_div1 {
+ audio_mclk: clk-div1-state {
pinconf {
pins = "gpio15";
function = "func1";
@@ -593,7 +593,7 @@ pinconf {
};
};
- volume_up_gpio: pm8996_gpio2 {
+ volume_up_gpio: pm8996-gpio2-state {
pinconf {
pins = "gpio2";
function = "normal";
@@ -605,7 +605,7 @@ pinconf {
};
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
@@ -615,7 +615,7 @@ pinconf {
};
};
- usb3_vbus_det_gpio: pm8996_gpio22 {
+ usb3_vbus_det_gpio: pm8996-gpio22-state {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -671,7 +671,7 @@ &pmi8994_gpios {
"NC",
"NC";
- usb2_vbus_det_gpio: pmi8996_gpio6 {
+ usb2_vbus_det_gpio: pmi8996-gpio6-state {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 9b4b7de7cec2..636a3b6ba7dc 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -463,7 +463,7 @@ tsp_en_default: tsp-en-default {
};
&pm8916_gpios {
- nfc_clk_req: nfc-clk-req {
+ nfc_clk_req: nfc-clk-req-state {
pins = "gpio2";
function = "func1";
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index cc038f9b641f..9161b9e1bda1 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -470,7 +470,7 @@ qca6174_bt: bluetooth {
};
&pm8994_gpios {
- bt_en_gpios: bt_en_gpios {
+ bt_en_gpios: bt-en-gpios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -481,7 +481,7 @@ pinconf {
};
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
@@ -519,19 +519,19 @@ &pmi8994_gpios {
* TODO: remove once a driver is available
* TODO: add VBUS GPIO 5
*/
- hd3ss460_pol: pol_low {
+ hd3ss460_pol: pol-low-state {
pins = "gpio8";
drive-strength = <3>;
bias-pull-down;
};
- hd3ss460_amsel: amsel_high {
+ hd3ss460_amsel: amsel-high-state {
pins = "gpio9";
drive-strength = <1>;
bias-pull-up;
};
- hd3ss460_en: en_high {
+ hd3ss460_en: en-high-state {
pins = "gpio10";
drive-strength = <1>;
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index ca3c633f5a45..d0cacb7d8c2a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -247,14 +247,14 @@ &pm8994_gpios {
* probably a reason for it, and just to be on the safe side, we follow suit.
*/
pm8994_gpios_defaults: pm8994-gpios-default-state {
- pm8994-gpio1-nc {
+ pm8994-gpio1-nc-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
bias-high-impedance;
};
- vol-down-n {
+ vol-down-n-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -264,7 +264,7 @@ vol-down-n {
power-source = <PM8994_GPIO_S4>;
};
- vol-up-n {
+ vol-up-n-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -273,7 +273,7 @@ vol-up-n {
power-source = <PM8994_GPIO_S4>;
};
- camera-snapshot-n {
+ camera-snapshot-n-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -283,7 +283,7 @@ camera-snapshot-n {
power-source = <PM8994_GPIO_S4>;
};
- camera-focus-n {
+ camera-focus-n-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -293,7 +293,7 @@ camera-focus-n {
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio6-nc {
+ pm8994-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -301,7 +301,7 @@ pm8994-gpio6-nc {
power-source = <PM8994_GPIO_VPH>;
};
- nfc-download {
+ nfc-download-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
@@ -311,7 +311,7 @@ nfc-download {
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio8-nc {
+ pm8994-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
@@ -321,7 +321,7 @@ pm8994-gpio8-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio9-nc {
+ pm8994-gpio9-nc-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
@@ -331,7 +331,7 @@ pm8994-gpio9-nc {
power-source = <PM8994_GPIO_VPH>;
};
- nfc-clock {
+ nfc-clock-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
@@ -341,7 +341,7 @@ nfc-clock {
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio11-nc {
+ pm8994-gpio11-nc-pins {
pins = "gpio11";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -349,7 +349,7 @@ pm8994-gpio11-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio12-nc {
+ pm8994-gpio12-nc-pins {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -357,7 +357,7 @@ pm8994-gpio12-nc {
power-source = <PM8994_GPIO_VPH>;
};
- ear-enable {
+ ear-enable-pins {
pins = "gpio13";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
@@ -367,7 +367,7 @@ ear-enable {
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio14-nc {
+ pm8994-gpio14-nc-pins {
pins = "gpio14";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -377,7 +377,7 @@ pm8994-gpio14-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pm-divclk1-gpio {
+ pm-divclk1-gpio-pins {
pins = "gpio15";
function = "func1";
output-high;
@@ -387,13 +387,13 @@ pm-divclk1-gpio {
power-source = <PM8994_GPIO_VPH>;
};
- pmi-clk-gpio {
+ pmi-clk-gpio-pins {
pins = "gpio16";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
- pm8994-gpio17-nc {
+ pm8994-gpio17-nc-pins {
pins = "gpio17";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -401,7 +401,7 @@ pm8994-gpio17-nc {
power-source = <PM8994_GPIO_VPH>;
};
- rome-sleep {
+ rome-sleep-pins {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
output-low;
@@ -411,7 +411,7 @@ rome-sleep {
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio19-nc {
+ pm8994-gpio19-nc-pins {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
@@ -421,7 +421,7 @@ pm8994-gpio19-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio22-nc {
+ pm8994-gpio22-nc-pins {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -446,34 +446,34 @@ &pm8994_mpps {
"RF_ID";
pm8994_mpps_defaults: pm8994-mpps-default-state {
- lcd-id_adc-mpp {
+ lcd-id_adc-mpp-pins {
pins = "mpp2";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
};
- pm-mpp4-nc {
+ pm-mpp4-nc-pins {
pins = "mpp4";
function = "digital";
bias-high-impedance;
power-source = <PM8994_GPIO_VPH>;
};
- flash-therm-mpp {
+ flash-therm-mpp-pins {
pins = "mpp5";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
};
- mpp6-nc {
+ mpp6-nc-pins {
pins = "mpp6";
function = "digital";
bias-high-impedance;
};
- rf-id-mpp {
+ rf-id-mpp-pins {
pins = "mpp8";
function = "analog";
input-enable;
@@ -504,7 +504,7 @@ &pmi8994_gpios {
"NC";
pmi8994_gpios_defaults: pmi8994-gpios-default-state {
- vib-ldo-en-gpio {
+ vib-ldo-en-gpio-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -513,7 +513,7 @@ vib-ldo-en-gpio {
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio2-nc {
+ pmi-gpio2-nc-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -523,7 +523,7 @@ pmi-gpio2-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pmi-gpio3-nc {
+ pmi-gpio3-nc-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -533,7 +533,7 @@ pmi-gpio3-nc {
power-source = <PM8994_GPIO_VPH>;
};
- pmi-gpio4-nc {
+ pmi-gpio4-nc-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -542,7 +542,7 @@ pmi-gpio4-nc {
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio5-nc {
+ pmi-gpio5-nc-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -551,7 +551,7 @@ pmi-gpio5-nc {
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio6-nc {
+ pmi-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -560,7 +560,7 @@ pmi-gpio6-nc {
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio7-nc {
+ pmi-gpio7-nc-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -569,7 +569,7 @@ pmi-gpio7-nc {
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio8-nc {
+ pmi-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
@@ -578,13 +578,13 @@ pmi-gpio8-nc {
power-source = <PM8994_GPIO_S4>;
};
- usb-switch-sel {
+ usb-switch-sel-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
- pmi-gpio10-nc {
+ pmi-gpio10-nc-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index a7090befc16f..259d2fcc6e7e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -608,7 +608,7 @@ vdd_gfx: s2 {
};
&pm8994_gpios {
- wlan_en_default: wlan-en-default {
+ wlan_en_default: wlan-en-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
@@ -617,7 +617,7 @@ wlan_en_default: wlan-en-default {
bias-disable;
};
- rome_enable_default: rome-enable-default {
+ rome_enable_default: rome-enable-state {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
@@ -625,7 +625,7 @@ rome_enable_default: rome-enable-default {
power-source = <PM8994_GPIO_VPH>;
};
- divclk1_default: divclk1_default {
+ divclk1_default: divclk1-state {
pins = "gpio15";
function = PMIC_GPIO_FUNC_FUNC1;
bias-disable;
@@ -633,7 +633,7 @@ divclk1_default: divclk1_default {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 22978d06f85b..ec68c03868db 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -257,7 +257,7 @@ &pm8994_gpios {
"UIM_BATT_ALARM", /* GPIO_21 */
"NC"; /* GPIO_22 */
- divclk2_pin_a: divclk2 {
+ divclk2_pin_a: divclk2-state {
pins = "gpio16";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index dc5b9b274df3..71566ecf1311 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -214,7 +214,7 @@ &mmss_smmu {
};
&pm8998_gpio {
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
bias-pull-up;
@@ -222,7 +222,7 @@ vol_up_pin_a: vol-up-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active {
+ cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = "normal";
bias-pull-up;
@@ -230,7 +230,7 @@ cam_focus_pin_a: cam-focus-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active {
+ cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = "normal";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 9563eb62db88..ef2a88a64d32 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -32,7 +32,7 @@ button-backlight {
};
&pmi8998_gpio {
- button_backlight_default: button-backlight-default {
+ button_backlight_default: button-backlight-state {
pinconf {
pins = "gpio5";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index dbaea360bffc..e49eafee0ece 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -263,7 +263,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
};
&pm8998_gpio {
- vol_keys_default: vol-keys-default {
+ vol_keys_default: vol-keys-state {
pinconf {
pins = "gpio5", "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 978495a8a6b9..20fe0394a3c1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -38,7 +38,7 @@ &lab {
};
&pmi8998_gpio {
- disp_dvdd_en: disp-dvdd-en-active {
+ disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10";
function = "normal";
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 47488a1aecae..3e85e690605c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -295,7 +295,7 @@ pm8005_s1: s1 {
};
&pm8998_gpio {
- vol_down_pin_a: vol-down-active {
+ vol_down_pin_a: vol-down-active-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -303,7 +303,7 @@ vol_down_pin_a: vol-down-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active {
+ cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -311,7 +311,7 @@ cam_focus_pin_a: cam-focus-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active {
+ cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -319,7 +319,7 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- audio_mclk_pin: audio-mclk-pin-active {
+ audio_mclk_pin: audio-mclk-pin-active-state {
pins = "gpio13";
function = "func2";
power-source = <0>;
@@ -327,7 +327,7 @@ audio_mclk_pin: audio-mclk-pin-active {
};
&pmi8998_gpio {
- cam_vio_default: cam-vio-active {
+ cam_vio_default: cam-vio-active-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
@@ -337,7 +337,7 @@ cam_vio_default: cam-vio-active {
power-source = <1>;
};
- vib_default: vib-en {
+ vib_default: vib-en-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 2f3104a84417..1721ebe5759b 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -304,7 +304,7 @@ pinconf {
};
&pms405_gpios {
- usb_vbus_boost_pin: usb-vbus-boost-pin {
+ usb_vbus_boost_pin: usb-vbus-boost-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -312,7 +312,7 @@ pinconf {
power-source = <1>;
};
};
- usb3_vbus_pin: usb3-vbus-pin {
+ usb3_vbus_pin: usb3-vbus-state {
pinconf {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 0e63f707b911..9549341f98fb 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -796,7 +796,7 @@ &pm8150l_gpios {
"NC",
"PM3003A_MODE";
- lt9611_rst_pin: lt9611-rst-pin {
+ lt9611_rst_pin: lt9611-rst-state {
pins = "gpio5";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index acdb36f4479f..33ada24ec917 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -467,7 +467,7 @@ wifi-firmware {
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&pm6150l_gpio {
- disp_pins: disp-pins {
+ disp_pins: disp-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_FUNC1;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 6a14259b93c4..e87e53e115cc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -368,7 +368,7 @@ &dp_hot_plug_det {
};
&pm7325_gpios {
- key_vol_up_default: key-vol-up-default {
+ key_vol_up_default: key-vol-up-state {
pins = "gpio6";
function = "normal";
input-enable;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index b833ba1e8f4a..1db90bd9a79f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -457,7 +457,7 @@ &sdc1_rclk {
*/
&pm8350c_gpios {
- pmic_edp_bl_en: pmic-edp-bl-en {
+ pmic_edp_bl_en: pmic-edp-bl-en-state {
pins = "gpio7";
function = "normal";
bias-disable;
@@ -467,7 +467,7 @@ pmic_edp_bl_en: pmic-edp-bl-en {
output-low;
};
- pmic_edp_bl_pwm: pmic-edp-bl-pwm {
+ pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
pins = "gpio8";
function = "func1";
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 194ebeb3259c..96a434245ed9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -569,7 +569,7 @@ &pm8998_gpio {
"OPTION2",
"PM845_SLB";
- cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
+ cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
pins = "gpio12";
function = "normal";
@@ -578,7 +578,7 @@ cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
+ cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
pins = "gpio10";
function = "normal";
@@ -587,7 +587,7 @@ cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 07b729f9fec5..c9d05e94040c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -440,7 +440,7 @@ &mss_pil {
};
&pm8998_gpio {
- volume_down_gpio: pm8998_gpio5 {
+ volume_down_gpio: pm8998-gpio5-state {
pinconf {
pins = "gpio5";
function = "normal";
@@ -450,7 +450,7 @@ pinconf {
};
};
- volume_up_gpio: pm8998_gpio6 {
+ volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 103cc40816fd..100702883987 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -508,7 +508,7 @@ &mss_pil {
};
&pm8998_gpio {
- volume_up_gpio: pm8998_gpio6 {
+ volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index d88dc07205f7..b5a6cdccec67 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -306,7 +306,7 @@ &ipa {
};
&pm8998_gpio {
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 61925216f5e3..14cc2c87a96b 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -339,7 +339,7 @@ &pm6150l_wled {
};
&pm6350_gpios {
- gpio_keys_pin: gpio-keys-pin {
+ gpio_keys_pin: gpio-keys-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
--
2.32.0
next prev parent reply other threads:[~2022-05-07 19:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-07 19:49 [PATCH 00/11] dt-bindings/pinctrl/arm: qcom: minor cleanups of QCOM PMIC pinctrl Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 01/11] dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU Krzysztof Kozlowski
2022-05-17 0:28 ` Rob Herring
2022-05-07 19:49 ` [PATCH 02/11] dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config Krzysztof Kozlowski
2022-05-17 0:29 ` Rob Herring
2022-05-07 19:49 ` [PATCH 03/11] dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names Krzysztof Kozlowski
2022-05-17 0:30 ` Rob Herring
2022-05-07 19:49 ` [PATCH 04/11] dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable' Krzysztof Kozlowski
2022-05-17 0:30 ` Rob Herring
2022-05-07 19:49 ` Krzysztof Kozlowski [this message]
2022-05-07 19:49 ` [PATCH 06/11] arm64: dts: qcom: add fallback compatible to PMIC GPIOs Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 07/11] arm64: dts: qcom: apq8096-db820c: add PM8994 pin function Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 08/11] arm64: dts: qcom: msm8994-msft-lumia-octagon: add PM8994 pin properties Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 09/11] ARM: dts: qcom: align PMIC GPIO pin configuration with DT schema Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 10/11] ARM: dts: qcom: mdm9615: add missing PMIC GPIO reg Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 11/11] ARM: dts: qcom: pmx65: add fallback compatible to PMIC GPIO Krzysztof Kozlowski
2022-05-19 13:03 ` [PATCH 00/11] dt-bindings/pinctrl/arm: qcom: minor cleanups of QCOM PMIC pinctrl Linus Walleij
2022-06-09 8:56 ` Krzysztof Kozlowski
2022-06-28 20:18 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220507194913.261121-6-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.