From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Luca Weiss <luca@z3ntu.xyz>, David Heidelberg <david@ixit.cz>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 06/11] arm64: dts: qcom: add fallback compatible to PMIC GPIOs
Date: Sat, 7 May 2022 21:49:08 +0200 [thread overview]
Message-ID: <20220507194913.261121-7-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
The bindings require all PMIC GPIO nodes to have two compatibles -
specific followed by SPMI or SSBI fallback. Add the fallback to fix
warnings like:
msm8916-samsung-serranove.dtb: gpios@c000: compatible: ['qcom,pm8916-gpio'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/pm6350.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8009.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8150l.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8350.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8350b.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmr735b.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pms405.dtsi | 2 +-
13 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
index c5d85064562b..f3056845e65f 100644
--- a/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -36,7 +36,7 @@ pm6350_resin: resin {
};
pm6350_gpios: gpios@c000 {
- compatible = "qcom,pm6350-gpio";
+ compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index c482663aad56..d0eefbb51663 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -171,7 +171,7 @@ vcoin: vcoin@83 {
};
pm660_gpios: gpios@c000 {
- compatible = "qcom,pm660-gpio";
+ compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm660_gpios 0 0 13>;
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
index b126d7e7e4fb..d451922d2b95 100644
--- a/arch/arm64/boot/dts/qcom/pm8009.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -19,7 +19,7 @@ pm8009_pon: pon@800 {
};
pm8009_gpios: gpio@c000 {
- compatible = "qcom,pm8005-gpio";
+ compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 0df76f7b1cc1..72cd93ced4c5 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -127,7 +127,7 @@ rtc@6000 {
};
pm8150_gpios: gpio@c000 {
- compatible = "qcom,pm8150-gpio";
+ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 058cc5107c75..28162f6fb61d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -112,7 +112,7 @@ pm8150b_adc_tm: adc-tm@3500 {
};
pm8150b_gpios: gpio@c000 {
- compatible = "qcom,pm8150b-gpio";
+ compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 52f094a2b713..0642e7d5be35 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -100,7 +100,7 @@ pm8150l_adc_tm: adc-tm@3500 {
};
pm8150l_gpios: gpio@c000 {
- compatible = "qcom,pm8150l-gpio";
+ compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
index b10f33afa5e3..6e91dd7a48b3 100644
--- a/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -45,7 +45,7 @@ pm8350_temp_alarm: temp-alarm@a00 {
};
pm8350_gpios: gpio@8800 {
- compatible = "qcom,pm8350-gpio";
+ compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
index f1d1d4c8edf8..d9512f01ed1e 100644
--- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -45,7 +45,7 @@ pm8350b_temp_alarm: temp-alarm@a00 {
};
pm8350b_gpios: gpio@8800 {
- compatible = "qcom,pm8350b-gpio";
+ compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index d58902432812..aedc0aa5602f 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -108,7 +108,7 @@ pm8916_mpps: mpps@a000 {
};
pm8916_gpios: gpios@c000 {
- compatible = "qcom,pm8916-gpio";
+ compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index 7072e5a2e73f..68e9122363ae 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -116,7 +116,7 @@ pmm8155au_1_rtc: rtc@6000 {
};
pmm8155au_1_gpios: gpio@c000 {
- compatible = "qcom,pmm8155au-gpio";
+ compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
index 72075964fbb9..c307fc662511 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -89,7 +89,7 @@ die-temp@6 {
};
pmm8155au_2_gpios: gpio@c000 {
- compatible = "qcom,pmm8155au-gpio";
+ compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
index 604324188603..93a658eb4cdd 100644
--- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -45,7 +45,7 @@ pmr735b_temp_alarm: temp-alarm@a00 {
};
pmr735b_gpios: gpio@8800 {
- compatible = "qcom,pmr735b-gpio";
+ compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 98d173a377d5..43190a5cfe33 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -38,7 +38,7 @@ pms405_0: pms405@0 {
#size-cells = <0>;
pms405_gpios: gpio@c000 {
- compatible = "qcom,pms405-gpio";
+ compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
--
2.32.0
next prev parent reply other threads:[~2022-05-07 19:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-07 19:49 [PATCH 00/11] dt-bindings/pinctrl/arm: qcom: minor cleanups of QCOM PMIC pinctrl Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 01/11] dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU Krzysztof Kozlowski
2022-05-17 0:28 ` Rob Herring
2022-05-07 19:49 ` [PATCH 02/11] dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config Krzysztof Kozlowski
2022-05-17 0:29 ` Rob Herring
2022-05-07 19:49 ` [PATCH 03/11] dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names Krzysztof Kozlowski
2022-05-17 0:30 ` Rob Herring
2022-05-07 19:49 ` [PATCH 04/11] dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable' Krzysztof Kozlowski
2022-05-17 0:30 ` Rob Herring
2022-05-07 19:49 ` [PATCH 05/11] arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema Krzysztof Kozlowski
2022-05-07 19:49 ` Krzysztof Kozlowski [this message]
2022-05-07 19:49 ` [PATCH 07/11] arm64: dts: qcom: apq8096-db820c: add PM8994 pin function Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 08/11] arm64: dts: qcom: msm8994-msft-lumia-octagon: add PM8994 pin properties Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 09/11] ARM: dts: qcom: align PMIC GPIO pin configuration with DT schema Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 10/11] ARM: dts: qcom: mdm9615: add missing PMIC GPIO reg Krzysztof Kozlowski
2022-05-07 19:49 ` [PATCH 11/11] ARM: dts: qcom: pmx65: add fallback compatible to PMIC GPIO Krzysztof Kozlowski
2022-05-19 13:03 ` [PATCH 00/11] dt-bindings/pinctrl/arm: qcom: minor cleanups of QCOM PMIC pinctrl Linus Walleij
2022-06-09 8:56 ` Krzysztof Kozlowski
2022-06-28 20:18 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220507194913.261121-7-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.