All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Jonathan Cameron" <jonathan.cameron@huawei.com>,
	"Markus Armbruster" <armbru@redhat.com>,
	"Ben Widawsky" <ben.widawsky@intel.com>,
	"Eric Blake" <eblake@redhat.com>,
	"Eduardo Habkost" <eduardo@habkost.net>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Yanan Wang" <wangyanan55@huawei.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PULL v2 29/86] hw/cxl/host: Add support for CXL Fixed Memory Windows.
Date: Mon, 16 May 2022 16:51:52 -0400	[thread overview]
Message-ID: <20220516204913.542894-30-mst@redhat.com> (raw)
In-Reply-To: <20220516204913.542894-1-mst@redhat.com>

From: Jonathan Cameron <jonathan.cameron@huawei.com>

The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.

For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.

ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k

Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
  the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.

When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question.  If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.

A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
   up it's PA memory map.  We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
   but these links cannot be established until command line devices have
   been added.

Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.

[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qapi/machine.json       | 21 +++++++++
 include/hw/cxl/cxl.h    | 21 +++++++++
 hw/cxl/cxl-host-stubs.c | 14 ++++++
 hw/cxl/cxl-host.c       | 94 +++++++++++++++++++++++++++++++++++++++++
 softmmu/vl.c            | 47 +++++++++++++++++++++
 hw/cxl/meson.build      |  6 +++
 qemu-options.hx         | 38 +++++++++++++++++
 7 files changed, 241 insertions(+)
 create mode 100644 hw/cxl/cxl-host-stubs.c
 create mode 100644 hw/cxl/cxl-host.c

diff --git a/qapi/machine.json b/qapi/machine.json
index 92480d4044..3f1eab3482 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -502,6 +502,27 @@
    'dst': 'uint16',
    'val': 'uint8' }}
 
+##
+# @CXLFixedMemoryWindowOptions:
+#
+# Create a CXL Fixed Memory Window
+#
+# @size: Size of the Fixed Memory Window in bytes. Must be a multiple
+#        of 256MiB.
+# @interleave-granularity: Number of contiguous bytes for which
+#                          accesses will go to a given interleave target.
+#                          Accepted values [256, 512, 1k, 2k, 4k, 8k, 16k]
+# @targets: Target root bridge IDs from -device ...,id=<ID> for each root
+#           bridge.
+#
+# Since 7.1
+##
+{ 'struct': 'CXLFixedMemoryWindowOptions',
+  'data': {
+      'size': 'size',
+      '*interleave-granularity': 'size',
+      'targets': ['str'] }}
+
 ##
 # @X86CPURegister32:
 #
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 8d1a7245d0..dce38124db 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,9 @@
 #ifndef CXL_H
 #define CXL_H
 
+
+#include "qapi/qapi-types-machine.h"
+#include "hw/pci/pci_bridge.h"
 #include "hw/pci/pci_host.h"
 #include "cxl_pci.h"
 #include "cxl_component.h"
@@ -20,10 +23,23 @@
 
 #define CXL_WINDOW_MAX 10
 
+typedef struct CXLFixedWindow {
+    uint64_t size;
+    char **targets;
+    struct PXBDev *target_hbs[8];
+    uint8_t num_targets;
+    uint8_t enc_int_ways;
+    uint8_t enc_int_gran;
+    /* Todo: XOR based interleaving */
+    MemoryRegion mr;
+    hwaddr base;
+} CXLFixedWindow;
+
 typedef struct CXLState {
     bool is_enabled;
     MemoryRegion host_mr;
     unsigned int next_mr_idx;
+    GList *fixed_windows;
 } CXLState;
 
 struct CXLHost {
@@ -35,4 +51,9 @@ struct CXLHost {
 #define TYPE_PXB_CXL_HOST "pxb-cxl-host"
 OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
 
+void cxl_fixed_memory_window_config(MachineState *ms,
+                                    CXLFixedMemoryWindowOptions *object,
+                                    Error **errp);
+void cxl_fixed_memory_window_link_targets(Error **errp);
+
 #endif
diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
new file mode 100644
index 0000000000..f8fd278d5d
--- /dev/null
+++ b/hw/cxl/cxl-host-stubs.c
@@ -0,0 +1,14 @@
+/*
+ * CXL host parameter parsing routine stubs
+ *
+ * Copyright (c) 2022 Huawei
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+                                    CXLFixedMemoryWindowOptions *object,
+                                    Error **errp) {};
+
+void cxl_fixed_memory_window_link_targets(Error **errp) {};
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
new file mode 100644
index 0000000000..ec5a75cbf5
--- /dev/null
+++ b/hw/cxl/cxl-host.c
@@ -0,0 +1,94 @@
+/*
+ * CXL host parameter parsing routines
+ *
+ * Copyright (c) 2022 Huawei
+ * Modeled loosely on the NUMA options handling in hw/core/numa.c
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "hw/boards.h"
+
+#include "qapi/qapi-visit-machine.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+                                    CXLFixedMemoryWindowOptions *object,
+                                    Error **errp)
+{
+    CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
+    strList *target;
+    int i;
+
+    for (target = object->targets; target; target = target->next) {
+        fw->num_targets++;
+    }
+
+    fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
+    if (*errp) {
+        return;
+    }
+
+    fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
+    for (i = 0, target = object->targets; target; i++, target = target->next) {
+        /* This link cannot be resolved yet, so stash the name for now */
+        fw->targets[i] = g_strdup(target->value);
+    }
+
+    if (object->size % (256 * MiB)) {
+        error_setg(errp,
+                   "Size of a CXL fixed memory window must my a multiple of 256MiB");
+        return;
+    }
+    fw->size = object->size;
+
+    if (object->has_interleave_granularity) {
+        fw->enc_int_gran =
+            cxl_interleave_granularity_enc(object->interleave_granularity,
+                                           errp);
+        if (*errp) {
+            return;
+        }
+    } else {
+        /* Default to 256 byte interleave */
+        fw->enc_int_gran = 0;
+    }
+
+    ms->cxl_devices_state->fixed_windows =
+        g_list_append(ms->cxl_devices_state->fixed_windows, fw);
+
+    return;
+}
+
+void cxl_fixed_memory_window_link_targets(Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+
+    if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+        GList *it;
+
+        for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+            CXLFixedWindow *fw = it->data;
+            int i;
+
+            for (i = 0; i < fw->num_targets; i++) {
+                Object *o;
+                bool ambig;
+
+                o = object_resolve_path_type(fw->targets[i],
+                                             TYPE_PXB_CXL_DEVICE,
+                                             &ambig);
+                if (!o) {
+                    error_setg(errp, "Could not resolve CXLFM target %s",
+                               fw->targets[i]);
+                    return;
+                }
+                fw->target_hbs[i] = PXB_CXL_DEV(o);
+            }
+        }
+    }
+}
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 817d515783..2390c13fb6 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -93,6 +93,7 @@
 #include "qemu/config-file.h"
 #include "qemu/qemu-options.h"
 #include "qemu/main-loop.h"
+#include "hw/cxl/cxl.h"
 #ifdef CONFIG_VIRTFS
 #include "fsdev/qemu-fsdev.h"
 #endif
@@ -118,6 +119,7 @@
 #include "qapi/qapi-events-run-state.h"
 #include "qapi/qapi-visit-block-core.h"
 #include "qapi/qapi-visit-compat.h"
+#include "qapi/qapi-visit-machine.h"
 #include "qapi/qapi-visit-ui.h"
 #include "qapi/qapi-commands-block-core.h"
 #include "qapi/qapi-commands-migration.h"
@@ -143,6 +145,12 @@ typedef struct BlockdevOptionsQueueEntry {
 
 typedef QSIMPLEQ_HEAD(, BlockdevOptionsQueueEntry) BlockdevOptionsQueue;
 
+typedef struct CXLFMWOptionQueueEntry {
+    CXLFixedMemoryWindowOptions *opts;
+    Location loc;
+    QSIMPLEQ_ENTRY(CXLFMWOptionQueueEntry) entry;
+} CXLFMWOptionQueueEntry;
+
 typedef struct ObjectOption {
     ObjectOptions *opts;
     QTAILQ_ENTRY(ObjectOption) next;
@@ -169,6 +177,8 @@ static int snapshot;
 static bool preconfig_requested;
 static QemuPluginList plugin_list = QTAILQ_HEAD_INITIALIZER(plugin_list);
 static BlockdevOptionsQueue bdo_queue = QSIMPLEQ_HEAD_INITIALIZER(bdo_queue);
+static QSIMPLEQ_HEAD(, CXLFMWOptionQueueEntry) CXLFMW_opts =
+    QSIMPLEQ_HEAD_INITIALIZER(CXLFMW_opts);
 static bool nographic = false;
 static int mem_prealloc; /* force preallocation of physical target memory */
 static const char *vga_model = NULL;
@@ -1153,6 +1163,24 @@ static void parse_display(const char *p)
     }
 }
 
+static void parse_cxl_fixed_memory_window(const char *optarg)
+{
+    CXLFMWOptionQueueEntry *cfmws_entry;
+    Visitor *v;
+
+    v = qobject_input_visitor_new_str(optarg, "cxl-fixed-memory-window",
+                                      &error_fatal);
+    cfmws_entry = g_new(CXLFMWOptionQueueEntry, 1);
+    visit_type_CXLFixedMemoryWindowOptions(v, NULL, &cfmws_entry->opts,
+                                           &error_fatal);
+    if (!cfmws_entry->opts) {
+        exit(1);
+    }
+    visit_free(v);
+    loc_save(&cfmws_entry->loc);
+    QSIMPLEQ_INSERT_TAIL(&CXLFMW_opts, cfmws_entry, entry);
+}
+
 static inline bool nonempty_str(const char *str)
 {
     return str && *str;
@@ -2015,6 +2043,20 @@ static void qemu_create_late_backends(void)
     qemu_semihosting_console_init();
 }
 
+static void cxl_set_opts(void)
+{
+    while (!QSIMPLEQ_EMPTY(&CXLFMW_opts)) {
+        CXLFMWOptionQueueEntry *cfmws_entry = QSIMPLEQ_FIRST(&CXLFMW_opts);
+
+        loc_restore(&cfmws_entry->loc);
+        QSIMPLEQ_REMOVE_HEAD(&CXLFMW_opts, entry);
+        cxl_fixed_memory_window_config(current_machine, cfmws_entry->opts,
+                                       &error_fatal);
+        qapi_free_CXLFixedMemoryWindowOptions(cfmws_entry->opts);
+        g_free(cfmws_entry);
+    }
+}
+
 static void qemu_resolve_machine_memdev(void)
 {
     if (ram_memdev_id) {
@@ -2661,6 +2703,7 @@ void qmp_x_exit_preconfig(Error **errp)
 
     qemu_init_board();
     qemu_create_cli_devices();
+    cxl_fixed_memory_window_link_targets(errp);
     qemu_machine_creation_done();
 
     if (loadvm) {
@@ -2841,6 +2884,9 @@ void qemu_init(int argc, char **argv, char **envp)
                     exit(1);
                 }
                 break;
+            case QEMU_OPTION_cxl_fixed_memory_window:
+                parse_cxl_fixed_memory_window(optarg);
+                break;
             case QEMU_OPTION_display:
                 parse_display(optarg);
                 break;
@@ -3652,6 +3698,7 @@ void qemu_init(int argc, char **argv, char **envp)
 
     qemu_resolve_machine_memdev();
     parse_numa_opts(current_machine);
+    cxl_set_opts();
 
     if (vmstate_dump_file) {
         /* dump and exit */
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index e68eea2358..f117b99949 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -3,4 +3,10 @@ softmmu_ss.add(when: 'CONFIG_CXL',
                    'cxl-component-utils.c',
                    'cxl-device-utils.c',
                    'cxl-mailbox-utils.c',
+                   'cxl-host.c',
+               ),
+               if_false: files(
+                   'cxl-host-stubs.c',
                ))
+
+softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('cxl-host-stubs.c'))
diff --git a/qemu-options.hx b/qemu-options.hx
index 796229c433..315bb18595 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -467,6 +467,44 @@ SRST
         -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
 ERST
 
+DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
+    "-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]\n",
+    QEMU_ARCH_ALL)
+SRST
+``-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]``
+    Define a CXL Fixed Memory Window (CFMW).
+
+    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+    They are regions of Host Physical Addresses (HPA) on a system which
+    may be interleaved across one or more CXL host bridges.  The system
+    software will assign particular devices into these windows and
+    configure the downstream Host-managed Device Memory (HDM) decoders
+    in root ports, switch ports and devices appropriately to meet the
+    interleave requirements before enabling the memory devices.
+
+    ``targets.X=firsttarget`` provides the mapping to CXL host bridges
+    which may be identified by the id provied in the -device entry.
+    Multiple entries are needed to specify all the targets when
+    the fixed memory window represents interleaved memory. X is the
+    target index from 0.
+
+    ``size=size`` sets the size of the CFMW. This must be a multiple of
+    256MiB. The region will be aligned to 256MiB but the location is
+    platform and configuration dependent.
+
+    ``interleave-granularity=granularity`` sets the granularity of
+    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+    4096KiB, 8192KiB and 16384KiB granularities supported.
+
+    Example:
+
+    ::
+
+        -cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=128G,interleave-granularity=512k
+
+ERST
+
 DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
     "-add-fd fd=fd,set=set[,opaque=opaque]\n"
     "                Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
-- 
MST



  parent reply	other threads:[~2022-05-16 21:29 UTC|newest]

Thread overview: 109+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 20:49 [PULL v2 00/86] virtio,pc,pci: fixes,cleanups,features Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 01/86] virtio: fix feature negotiation for ACCESS_PLATFORM Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 02/86] intel-iommu: correct the value used for error_setg_errno() Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 03/86] hw/pci/cxl: Add a CXL component type (interface) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 04/86] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 05/86] MAINTAINERS: Add entry for Compute Express Link Emulation Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 06/86] hw/cxl/device: Introduce a CXL device (8.2.8) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 07/86] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 08/86] hw/cxl/device: Implement basic mailbox (8.2.8.4) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 09/86] hw/cxl/device: Add memory device utilities Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 10/86] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 11/86] hw/cxl/device: Timestamp implementation (8.2.9.3) Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 12/86] hw/cxl/device: Add log commands (8.2.9.4) + CEL Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 13/86] hw/pxb: Use a type for realizing expanders Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 14/86] hw/pci/cxl: Create a CXL bus type Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 15/86] cxl: Machine level control on whether CXL support is enabled Michael S. Tsirkin
2022-05-16 20:50 ` [PULL v2 16/86] hw/pxb: Allow creation of a CXL PXB (host bridge) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 17/86] qtest/cxl: Introduce initial test for pxb-cxl only Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 18/86] hw/cxl/rp: Add a root port Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 19/86] hw/cxl/device: Add a memory device (8.2.8.5) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 20/86] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 21/86] hw/cxl/device: Add some trivial commands Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 22/86] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 23/86] hw/cxl/device: Implement get/set Label Storage Area (LSA) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 24/86] qtests/cxl: Add initial root port and CXL type3 tests Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 25/86] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142) Michael S. Tsirkin
2022-06-16 14:45   ` Igor Mammedov
2022-06-17 10:51     ` Jonathan Cameron via
2022-06-17 11:56       ` Igor Mammedov
2022-05-16 20:51 ` [PULL v2 26/86] acpi/cxl: Add _OSC implementation (9.14.2) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 27/86] acpi/cxl: Create the CEDT (9.14.1) Michael S. Tsirkin
2022-05-16 20:51 ` [PULL v2 28/86] hw/cxl/component: Add utils for interleave parameter encoding/decoding Michael S. Tsirkin
2022-06-27 13:29   ` Peter Maydell
2022-06-27 14:59     ` Jonathan Cameron via
2022-05-16 20:51 ` Michael S. Tsirkin [this message]
2022-07-19 13:57   ` [PULL v2 29/86] hw/cxl/host: Add support for CXL Fixed Memory Windows Peter Maydell
2022-05-16 20:51 ` [PULL v2 30/86] acpi/cxl: Introduce CFMWS structures in CEDT Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 31/86] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 32/86] pci/pcie_port: Add pci_find_port_by_pn() Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 33/86] CXL/cxl_component: Add cxl_get_hb_cstate() Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 34/86] mem/cxl_type3: Add read and write functions for associated hostmem Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 35/86] cxl/cxl-host: Add memops for CFMWS region Michael S. Tsirkin
2022-07-20 12:23   ` Peter Maydell
2022-07-21 14:37     ` Jonathan Cameron via
2022-05-16 20:52 ` [PULL v2 36/86] hw/cxl/component Add a dumb HDM decoder handler Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 37/86] i386/pc: Enable CXL fixed memory windows Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 38/86] tests/acpi: q35: Allow addition of a CXL test Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 39/86] qtests/bios-tables-test: Add a test for CXL emulation Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 40/86] tests/acpi: Add tables " Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 41/86] qtest/cxl: Add more complex test cases with CFMWs Michael S. Tsirkin
2022-05-16 20:52 ` [PULL v2 42/86] docs/cxl: Add initial Compute eXpress Link (CXL) documentation Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 43/86] vhost: Track descriptor chain in private at SVQ Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 44/86] vhost: Fix device's used descriptor dequeue Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 45/86] vdpa: Fix bad index calculus at vhost_vdpa_get_vring_base Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 46/86] vdpa: Fix index calculus at vhost_vdpa_svqs_start Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 47/86] hw/virtio: Replace g_memdup() by g_memdup2() Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 48/86] vhost: Fix element in vhost_svq_add failure Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 49/86] target/i386: Fix sanity check on max APIC ID / X2APIC enablement Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 50/86] intel_iommu: Support IR-only mode without DMA translation Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 51/86] intel_iommu: Only allow interrupt remapping to be enabled if it's supported Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 52/86] intel_iommu: Fix irqchip / X2APIC configuration checks Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 53/86] intel-iommu: remove VTD_FR_RESERVED_ERR Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 54/86] intel-iommu: block output address in interrupt address range Michael S. Tsirkin
2022-05-16 20:53 ` [PULL v2 55/86] intel-iommu: update root_scalable before switching as during post_load Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 56/86] intel-iommu: update iq_dw during post load Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 57/86] vhost_net: Print feature masks in hex Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 58/86] hw/virtio: move virtio-pci.h into shared include space Michael S. Tsirkin
2022-05-16 20:54   ` [Virtio-fs] " Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 59/86] virtio-pci: add notification trace points Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 60/86] hw/virtio: add vhost_user_[read|write] " Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 61/86] docs: vhost-user: clean up request/reply description Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 62/86] docs: vhost-user: rewrite section on ring state machine Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 63/86] docs: vhost-user: replace master/slave with front-end/back-end Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 64/86] vhost-user.rst: add clarifying language about protocol negotiation Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 65/86] libvhost-user: expose vu_request_to_string Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 66/86] docs/devel: start documenting writing VirtIO devices Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 67/86] include/hw: start documenting the vhost API Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 68/86] hw/virtio/vhost-user: don't suppress F_CONFIG when supported Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 69/86] virtio/vhost-user: dynamically assign VhostUserHostNotifiers Michael S. Tsirkin
2022-05-16 20:54 ` [PULL v2 70/86] virtio: drop name parameter for virtio_init() Michael S. Tsirkin
2022-05-16 20:54   ` [Virtio-fs] " Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 71/86] virtio: add vhost support for virtio devices Michael S. Tsirkin
2022-05-16 20:55   ` [Virtio-fs] " Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 72/86] vhost-user: more master/slave things Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 73/86] docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 74/86] include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 75/86] include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX Michael S. Tsirkin
2022-05-26 13:27   ` Daniel Henrique Barboza
2022-05-26 15:54     ` BALATON Zoltan
2022-05-26 16:43       ` BALATON Zoltan
2022-05-26 19:13         ` Michael S. Tsirkin
2022-05-26 19:34           ` BALATON Zoltan
2022-05-26 19:55             ` Michael S. Tsirkin
2022-05-26 20:51               ` BALATON Zoltan
2022-05-30  9:42       ` Thomas Huth
2022-05-30 10:09         ` Cédric Le Goater
2022-05-30 16:00         ` Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 76/86] hw/i386: Make pit a property of common x86 base machine type Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 77/86] hw/i386: Make pic " Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 78/86] hw/i386/amd_iommu: Fix IOMMU event log encoding errors Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 79/86] virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 80/86] virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 81/86] vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 82/86] vhost-net: fix improper cleanup in vhost_net_start Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 83/86] vhost-vdpa: backend feature should set only once Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 84/86] vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request() Michael S. Tsirkin
2022-05-16 20:55 ` [PULL v2 85/86] virtio-net: don't handle mq request in userspace handler for vhost-vdpa Michael S. Tsirkin
2022-05-16 20:56 ` [PULL v2 86/86] vhost-user-scsi: avoid unlink(NULL) with fd passing Michael S. Tsirkin
2022-05-17  3:01 ` [PULL v2 00/86] virtio,pc,pci: fixes,cleanups,features Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516204913.542894-30-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=armbru@redhat.com \
    --cc=ben.widawsky@intel.com \
    --cc=eblake@redhat.com \
    --cc=eduardo@habkost.net \
    --cc=f4bug@amsat.org \
    --cc=jonathan.cameron@huawei.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=wangyanan55@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.