All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: linus.walleij@linaro.org, brgl@bgdev.pl, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, wens@csie.org,
	jic23@kernel.org, lee.jones@linaro.org, broonie@kernel.org,
	gregkh@linuxfoundation.org, lgirdwood@gmail.com, lars@metafoo.de,
	rafael@kernel.org, quic_gurus@quicinc.com,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192
Date: Thu, 9 Jun 2022 23:12:26 +0200	[thread overview]
Message-ID: <20220609211226.5y7scqlfsxvfd3ag@mercury.elektranox.org> (raw)
In-Reply-To: <20220607155324.118102-18-aidanmacdonald.0x0@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 4253 bytes --]

Hi,

On Tue, Jun 07, 2022 at 04:53:24PM +0100, Aidan MacDonald wrote:
> The AXP192 has a battery charger similar to other X-Powers PMICs,
> but unlike the other supported devices, it does not have a fuel
> gauge and can't report battery capacity directly.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

>  drivers/power/supply/axp20x_battery.c | 49 +++++++++++++++++++++++++--
>  1 file changed, 46 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index e9547e2d7c48..3fa2faa6f0f8 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -538,6 +538,19 @@ static int axp20x_battery_set_prop(struct power_supply *psy,
>  	}
>  }
>  
> +static enum power_supply_property axp192_battery_props[] = {
> +	POWER_SUPPLY_PROP_PRESENT,
> +	POWER_SUPPLY_PROP_ONLINE,
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> +	POWER_SUPPLY_PROP_HEALTH,
> +	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> +	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> +};
> +
>  static enum power_supply_property axp20x_battery_props[] = {
>  	POWER_SUPPLY_PROP_PRESENT,
>  	POWER_SUPPLY_PROP_ONLINE,
> @@ -562,6 +575,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy,
>  	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
>  }
>  
> +static const struct power_supply_desc axp192_batt_ps_desc = {
> +	.name = "axp192-battery",
> +	.type = POWER_SUPPLY_TYPE_BATTERY,
> +	.properties = axp192_battery_props,
> +	.num_properties = ARRAY_SIZE(axp192_battery_props),
> +	.property_is_writeable = axp20x_battery_prop_writeable,
> +	.get_property = axp20x_battery_get_prop,
> +	.set_property = axp20x_battery_set_prop,
> +};
> +
>  static const struct power_supply_desc axp20x_batt_ps_desc = {
>  	.name = "axp20x-battery",
>  	.type = POWER_SUPPLY_TYPE_BATTERY,
> @@ -572,6 +595,19 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
>  	.set_property = axp20x_battery_set_prop,
>  };
>  
> +static const int axp192_ccc_table[AXP20X_CHRG_CTRL1_TGT_CURR+1] = {
> +	100000,  190000,  280000,  360000,
> +	450000,  550000,  630000,  700000,
> +	780000,  880000,  960000,  1000000,
> +	1080000, 1160000, 1240000, 1320000,
> +};
> +
> +static const struct axp_data axp192_data = {
> +	.ccc_table = axp192_ccc_table,
> +	.get_max_voltage = axp20x_battery_get_max_voltage,
> +	.set_max_voltage = axp20x_battery_set_max_voltage,
> +};
> +
>  static const struct axp_data axp209_data = {
>  	.ccc_scale = 100000,
>  	.ccc_offset = 300000,
> @@ -600,6 +636,9 @@ static const struct axp_data axp813_data = {
>  
>  static const struct of_device_id axp20x_battery_ps_id[] = {
>  	{
> +		.compatible = "x-powers,axp192-battery-power-supply",
> +		.data = (void *)&axp192_data,
> +	}, {
>  		.compatible = "x-powers,axp209-battery-power-supply",
>  		.data = (void *)&axp209_data,
>  	}, {
> @@ -617,6 +656,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
>  	struct axp20x_batt_ps *axp20x_batt;
>  	struct power_supply_config psy_cfg = {};
>  	struct power_supply_battery_info *info;
> +	const struct power_supply_desc *ps_desc;
>  	struct device *dev = &pdev->dev;
>  
>  	if (!of_device_is_available(pdev->dev.of_node))
> @@ -660,9 +700,12 @@ static int axp20x_power_probe(struct platform_device *pdev)
>  
>  	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
>  
> -	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
> -						       &axp20x_batt_ps_desc,
> -						       &psy_cfg);
> +	if (!axp20x_batt->data->has_fg)
> +		ps_desc = &axp192_batt_ps_desc;
> +	else
> +		ps_desc = &axp20x_batt_ps_desc;
> +
> +	axp20x_batt->batt = devm_power_supply_register(&pdev->dev, ps_desc, &psy_cfg);
>  	if (IS_ERR(axp20x_batt->batt)) {
>  		dev_err(&pdev->dev, "failed to register power supply: %ld\n",
>  			PTR_ERR(axp20x_batt->batt));
> -- 
> 2.35.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

      reply	other threads:[~2022-06-09 21:12 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-07 15:53 [PATCH v2 00/17] Add support for AXP192 PMIC Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 01/17] regmap-irq: Use sub_irq_reg() to calculate unmask register address Aidan MacDonald
2022-06-09 16:39   ` Guru Das Srinagesh
2022-06-11 14:32     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts Aidan MacDonald
2022-06-08 16:17   ` Mark Brown
2022-06-10 15:40     ` Aidan MacDonald
2022-06-10 16:47       ` Mark Brown
2022-06-11 14:22         ` Aidan MacDonald
2022-06-23  8:54       ` Matti Vaittinen
2022-06-23 20:35         ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 03/17] dt-bindings: mfd: add bindings for AXP192 MFD device Aidan MacDonald
2022-06-08 10:48   ` Krzysztof Kozlowski
2022-06-09 17:52     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 04/17] dt-bindings: iio: adc: axp209: Add AXP192 compatible Aidan MacDonald
2022-06-08 10:49   ` Krzysztof Kozlowski
2022-06-07 15:53 ` [PATCH v2 05/17] dt-bindings: power: supply: axp20x: " Aidan MacDonald
2022-06-08 10:50   ` Krzysztof Kozlowski
2022-06-07 15:53 ` [PATCH v2 06/17] dt-bindings: gpio: Add AXP192 GPIO bindings Aidan MacDonald
2022-06-09 20:24   ` Rob Herring
2022-06-07 15:53 ` [PATCH v2 07/17] dt-bindings: power: axp20x-battery: Add AXP192 compatible Aidan MacDonald
2022-06-09 20:24   ` Rob Herring
2022-06-07 15:53 ` [PATCH v2 08/17] mfd: axp20x: Add support for AXP192 Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 09/17] regulator: " Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups Aidan MacDonald
2022-06-08 13:22   ` Jonathan Cameron
2022-06-08 22:58     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions Aidan MacDonald
2022-06-08 13:28   ` Jonathan Cameron
2022-06-08 23:13     ` Aidan MacDonald
2022-06-11 18:23       ` Jonathan Cameron
2022-06-08 13:30   ` Jonathan Cameron
2022-06-07 15:53 ` [PATCH v2 12/17] iio: adc: axp20x_adc: Add support for AXP192 Aidan MacDonald
2022-06-08 13:35   ` Jonathan Cameron
2022-06-07 15:53 ` [PATCH v2 13/17] power: supply: axp20x_usb_power: " Aidan MacDonald
2022-06-09 20:53   ` Sebastian Reichel
2022-06-07 15:53 ` [PATCH v2 14/17] pinctrl: Add AXP192 pin control driver Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 15/17] power: axp20x_battery: Add constant charge current table Aidan MacDonald
2022-06-09 21:11   ` Sebastian Reichel
2022-06-10 15:40     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 16/17] power: axp20x_battery: Support battery status without fuel gauge Aidan MacDonald
2022-06-09 21:11   ` Sebastian Reichel
2022-06-07 15:53 ` [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192 Aidan MacDonald
2022-06-09 21:12   ` Sebastian Reichel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220609211226.5y7scqlfsxvfd3ag@mercury.elektranox.org \
    --to=sebastian.reichel@collabora.com \
    --cc=aidanmacdonald.0x0@gmail.com \
    --cc=brgl@bgdev.pl \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=quic_gurus@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.