[PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA

From: William Zhang <william.zhang@broadcom.com>
To: Linux ARM List <linux-arm-kernel@lists.infradead.org>
Cc: Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>,
	joel.peshkin@broadcom.com, dan.beygelman@broadcom.com,
	f.fainelli@gmail.com, krzysztof.kozlowski@linaro.org,
	rafal@milecki.pl, William Zhang <william.zhang@broadcom.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Wolfram Sang <wsa@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	Rob Herring <robh@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-i2c@vger.kernel.org (open list:I2C SUBSYSTEM HOST DRIVERS),
	linux-kernel@vger.kernel.org (open list),
	linux-mtd@lists.infradead.org (open list:MEMORY TECHNOLOGY
	DEVICES (MTD)),
	netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
	linux-pci@vger.kernel.org (open list:PCI NATIVE HOST BRIDGE AND
	ENDPOINT DRIVERS),
	linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK),
	linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
	linux-mips@vger.kernel.org (open list:BROADCOM BMIPS MIPS
	ARCHITECTURE),
	linux-serial@vger.kernel.org (open list:SERIAL DRIVERS),
	linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE
	DRIVERS)
Subject: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
Date: Wed,  3 Aug 2022 10:54:52 -0700	[thread overview]
Message-ID: <20220803175455.47638-7-william.zhang@broadcom.com> (raw)
In-Reply-To: <20220803175455.47638-1-william.zhang@broadcom.com>

[-- Attachment #1: Type: text/plain, Size: 7653 bytes --]

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

---

Changes in v3:
- Add Acked-by tags

Changes in v2:
- Add Acked-by tags
- Update commit message with more details

 drivers/i2c/busses/Kconfig            | 4 ++--
 drivers/mtd/parsers/Kconfig           | 6 +++---
 drivers/net/ethernet/broadcom/Kconfig | 4 ++--
 drivers/pci/controller/Kconfig        | 2 +-
 drivers/phy/broadcom/Kconfig          | 4 ++--
 drivers/pinctrl/bcm/Kconfig           | 4 ++--
 drivers/reset/Kconfig                 | 2 +-
 drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
 drivers/tty/serial/Kconfig            | 4 ++--
 drivers/watchdog/Kconfig              | 2 +-
 10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
 	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	  Watchdog driver for the built-in hardware in Broadcom 7038 and
 	  later SoCs used in set-top boxes.  BCM7038 was made public
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
