From: Anup Patel <apatel@ventanamicro.com> To: Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Atish Patra <atishp@atishpatra.org>, Alistair Francis <Alistair.Francis@wdc.com>, Anup Patel <anup@brainfault.org>, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, Anup Patel <apatel@ventanamicro.com> Subject: [PATCH v8 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs Date: Sat, 20 Aug 2022 12:24:44 +0530 [thread overview] Message-ID: <20220820065446.389788-6-apatel@ventanamicro.com> (raw) In-Reply-To: <20220820065446.389788-1-apatel@ventanamicro.com> To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the RISC-V kernel, we need hardware mechanism to directly inject IPI from the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls. The upcoming AIA IMSIC devices allow direct IPI injection from the supervisor mode (i.e. RISC-V kernel). To support this, we extend the riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip drivers can mark IPIs as suitable for remote FENCEs. Signed-off-by: Anup Patel <apatel@ventanamicro.com> --- arch/riscv/include/asm/smp.h | 18 ++++++++++++++++-- arch/riscv/kernel/sbi-ipi.c | 2 +- arch/riscv/kernel/smp.c | 11 ++++++++++- drivers/clocksource/timer-clint.c | 2 +- 4 files changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index 79ed0b73cd4e..56976e41a21e 100644 --- a/arch/riscv/include/asm/smp.h +++ b/arch/riscv/include/asm/smp.h @@ -16,6 +16,9 @@ struct seq_file; extern unsigned long boot_cpu_hartid; #ifdef CONFIG_SMP + +#include <linux/jump_label.h> + /* * Mapping between linux logical cpu index and hartid. */ @@ -46,7 +49,12 @@ void riscv_ipi_disable(void); bool riscv_ipi_have_virq_range(void); /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */ -void riscv_ipi_set_virq_range(int virq, int nr); +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence); + +/* Check if we can use IPIs for remote FENCEs */ +DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +#define riscv_use_ipi_for_rfence() \ + static_branch_unlikely(&riscv_ipi_for_rfence) /* Secondary hart entry */ asmlinkage void smp_callin(void); @@ -93,10 +101,16 @@ static inline bool riscv_ipi_have_virq_range(void) return false; } -static inline void riscv_ipi_set_virq_range(int virq, int nr) +static inline void riscv_ipi_set_virq_range(int virq, int nr, + bool use_for_rfence) { } +static inline bool riscv_use_ipi_for_rfence(void) +{ + return false; +} + #endif /* CONFIG_SMP */ #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP) diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c index 0bb070a5dcb4..27fdc394d2f0 100644 --- a/arch/riscv/kernel/sbi-ipi.c +++ b/arch/riscv/kernel/sbi-ipi.c @@ -55,6 +55,6 @@ void __init sbi_ipi_init(void) return; } - riscv_ipi_set_virq_range(virq, BITS_PER_BYTE); + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, false); pr_info("providing IPIs using SBI IPI extension\n"); } diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index e25d39cd2d27..cb2bda4822de 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -143,7 +143,10 @@ bool riscv_ipi_have_virq_range(void) return (ipi_virq_base) ? true : false; } -void riscv_ipi_set_virq_range(int virq, int nr) +DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence); + +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence) { int i, err; @@ -166,6 +169,12 @@ void riscv_ipi_set_virq_range(int virq, int nr) /* Enabled IPIs for boot CPU immediately */ riscv_ipi_enable(); + + /* Update RFENCE static key */ + if (use_for_rfence) + static_branch_enable(&riscv_ipi_for_rfence); + else + static_branch_disable(&riscv_ipi_for_rfence); } EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range); diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c index ac7c2caaa65a..f418816fd706 100644 --- a/drivers/clocksource/timer-clint.c +++ b/drivers/clocksource/timer-clint.c @@ -246,7 +246,7 @@ static int __init clint_timer_init_dt(struct device_node *np) goto fail_remove_cpuhp; } - riscv_ipi_set_virq_range(virq, BITS_PER_BYTE); + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, true); clint_clear_ipi(clint_ipi_irq, NULL); return 0; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com> To: Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Atish Patra <atishp@atishpatra.org>, Alistair Francis <Alistair.Francis@wdc.com>, Anup Patel <anup@brainfault.org>, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, Anup Patel <apatel@ventanamicro.com> Subject: [PATCH v8 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs Date: Sat, 20 Aug 2022 12:24:44 +0530 [thread overview] Message-ID: <20220820065446.389788-6-apatel@ventanamicro.com> (raw) In-Reply-To: <20220820065446.389788-1-apatel@ventanamicro.com> To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the RISC-V kernel, we need hardware mechanism to directly inject IPI from the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls. The upcoming AIA IMSIC devices allow direct IPI injection from the supervisor mode (i.e. RISC-V kernel). To support this, we extend the riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip drivers can mark IPIs as suitable for remote FENCEs. Signed-off-by: Anup Patel <apatel@ventanamicro.com> --- arch/riscv/include/asm/smp.h | 18 ++++++++++++++++-- arch/riscv/kernel/sbi-ipi.c | 2 +- arch/riscv/kernel/smp.c | 11 ++++++++++- drivers/clocksource/timer-clint.c | 2 +- 4 files changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index 79ed0b73cd4e..56976e41a21e 100644 --- a/arch/riscv/include/asm/smp.h +++ b/arch/riscv/include/asm/smp.h @@ -16,6 +16,9 @@ struct seq_file; extern unsigned long boot_cpu_hartid; #ifdef CONFIG_SMP + +#include <linux/jump_label.h> + /* * Mapping between linux logical cpu index and hartid. */ @@ -46,7 +49,12 @@ void riscv_ipi_disable(void); bool riscv_ipi_have_virq_range(void); /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */ -void riscv_ipi_set_virq_range(int virq, int nr); +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence); + +/* Check if we can use IPIs for remote FENCEs */ +DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +#define riscv_use_ipi_for_rfence() \ + static_branch_unlikely(&riscv_ipi_for_rfence) /* Secondary hart entry */ asmlinkage void smp_callin(void); @@ -93,10 +101,16 @@ static inline bool riscv_ipi_have_virq_range(void) return false; } -static inline void riscv_ipi_set_virq_range(int virq, int nr) +static inline void riscv_ipi_set_virq_range(int virq, int nr, + bool use_for_rfence) { } +static inline bool riscv_use_ipi_for_rfence(void) +{ + return false; +} + #endif /* CONFIG_SMP */ #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP) diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c index 0bb070a5dcb4..27fdc394d2f0 100644 --- a/arch/riscv/kernel/sbi-ipi.c +++ b/arch/riscv/kernel/sbi-ipi.c @@ -55,6 +55,6 @@ void __init sbi_ipi_init(void) return; } - riscv_ipi_set_virq_range(virq, BITS_PER_BYTE); + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, false); pr_info("providing IPIs using SBI IPI extension\n"); } diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index e25d39cd2d27..cb2bda4822de 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -143,7 +143,10 @@ bool riscv_ipi_have_virq_range(void) return (ipi_virq_base) ? true : false; } -void riscv_ipi_set_virq_range(int virq, int nr) +DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence); + +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence) { int i, err; @@ -166,6 +169,12 @@ void riscv_ipi_set_virq_range(int virq, int nr) /* Enabled IPIs for boot CPU immediately */ riscv_ipi_enable(); + + /* Update RFENCE static key */ + if (use_for_rfence) + static_branch_enable(&riscv_ipi_for_rfence); + else + static_branch_disable(&riscv_ipi_for_rfence); } EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range); diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c index ac7c2caaa65a..f418816fd706 100644 --- a/drivers/clocksource/timer-clint.c +++ b/drivers/clocksource/timer-clint.c @@ -246,7 +246,7 @@ static int __init clint_timer_init_dt(struct device_node *np) goto fail_remove_cpuhp; } - riscv_ipi_set_virq_range(virq, BITS_PER_BYTE); + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, true); clint_clear_ipi(clint_ipi_irq, NULL); return 0; -- 2.34.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-08-20 6:56 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-20 6:54 [PATCH v8 0/7] RISC-V IPI Improvements Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-20 6:54 ` [PATCH v8 1/7] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-20 6:54 ` [PATCH v8 2/7] irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-20 6:54 ` [PATCH v8 3/7] genirq: Add mechanism to multiplex a single HW IPI Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-20 6:54 ` [PATCH v8 4/7] RISC-V: Treat IPIs as normal Linux IRQs Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-26 18:48 ` Conor.Dooley 2022-08-26 18:48 ` Conor.Dooley 2022-08-26 18:57 ` Marc Zyngier 2022-08-26 18:57 ` Marc Zyngier 2022-08-29 4:43 ` Anup Patel 2022-08-29 4:43 ` Anup Patel 2022-08-20 6:54 ` Anup Patel [this message] 2022-08-20 6:54 ` [PATCH v8 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs Anup Patel 2022-08-20 6:54 ` [PATCH v8 6/7] RISC-V: Use IPIs for remote TLB flush when possible Anup Patel 2022-08-20 6:54 ` Anup Patel 2022-08-20 6:54 ` [PATCH v8 7/7] RISC-V: Use IPIs for remote icache " Anup Patel 2022-08-20 6:54 ` Anup Patel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220820065446.389788-6-apatel@ventanamicro.com \ --to=apatel@ventanamicro.com \ --cc=Alistair.Francis@wdc.com \ --cc=anup@brainfault.org \ --cc=atishp@atishpatra.org \ --cc=daniel.lezcano@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=maz@kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.