From: jia-wei.chang <jia-wei.chang@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Roger Lu <roger.lu@mediatek.com>,
Kevin Hilman <khilman@kernel.org>,
Jia-Wei Chang <jia-wei.chang@mediatek.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>,
<hsinyi@google.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Subject: [PATCH v5 2/4] soc: mediatek: svs: add support for mt8186
Date: Tue, 23 Aug 2022 15:17:06 +0800 [thread overview]
Message-ID: <20220823071708.30927-3-jia-wei.chang@mediatek.com> (raw)
In-Reply-To: <20220823071708.30927-1-jia-wei.chang@mediatek.com>
From: Jia-Wei Chang <jia-wei.chang@mediatek.com>
MT8186 svs has a number of banks which used as optimization of opp
voltage table for corresponding dvfs drivers.
MT8186 svs big core uses 2-line high bank and low bank to optimize the
voltage of opp table for higher and lower frequency respectively.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/soc/mediatek/mtk-svs.c | 350 ++++++++++++++++++++++++++++++++-
1 file changed, 343 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index dee8664a12fd..03e0a591359c 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -355,6 +355,7 @@ struct svs_platform_data {
* @dcbdet: svs efuse data
* @dcmdet: svs efuse data
* @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
+ * @vbin_turn_pt: voltage bin turn point helps know which svsb_volt should be overridden
* @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
*
* Svs bank will generate suitalbe voltages by below general math equation
@@ -417,6 +418,7 @@ struct svs_bank {
u32 dcbdet;
u32 dcmdet;
u32 turn_pt;
+ u32 vbin_turn_pt;
u32 type;
};
@@ -692,11 +694,12 @@ static int svs_status_debug_show(struct seq_file *m, void *v)
ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
if (ret)
- seq_printf(m, "%s: temperature ignore, turn_pt = %u\n",
- svsb->name, svsb->turn_pt);
+ seq_printf(m, "%s: temperature ignore, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, svsb->vbin_turn_pt, svsb->turn_pt);
else
- seq_printf(m, "%s: temperature = %d, turn_pt = %u\n",
- svsb->name, tzone_temp, svsb->turn_pt);
+ seq_printf(m, "%s: temperature = %d, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, tzone_temp, svsb->vbin_turn_pt,
+ svsb->turn_pt);
for (i = 0; i < svsb->opp_count; i++) {
opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
@@ -889,9 +892,11 @@ static void svs_get_bank_volts_v3(struct svs_platform *svsp)
opp_stop = svsb->opp_count;
}
- for (i = opp_start; i < opp_stop; i++)
+ for (i = opp_start; i < opp_stop; i++) {
if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
svsb->volt[i] -= svsb->dvt_fixed;
+ svsb->volt[i] += svsb->volt_od;
+ }
}
static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
@@ -982,6 +987,10 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
struct svs_bank *svsb = svsp->pbank;
u32 temp, i;
+ if (svsb->phase == SVSB_PHASE_MON &&
+ svsb->volt_flags & SVSB_MON_VOLT_IGNORE)
+ return;
+
temp = svs_readl_relaxed(svsp, VOP74);
svsb->volt[14] = (temp >> 24) & GENMASK(7, 0);
svsb->volt[12] = (temp >> 16) & GENMASK(7, 0);
@@ -1007,8 +1016,34 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
svsb->volt[14],
svsb->freq_pct[15]);
- for (i = 0; i < svsb->opp_count; i++)
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
+ svsb->volt[i] -= svsb->dvt_fixed;
svsb->volt[i] += svsb->volt_od;
+ }
+
+ /* For voltage bin support */
+ if (svsb->opp_dfreq[0] > svsb->freq_base) {
+ svsb->volt[0] = svs_opp_volt_to_bank_volt(svsb->opp_dvolt[0],
+ svsb->volt_step,
+ svsb->volt_base);
+
+ /* Find voltage bin turn point */
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->opp_dfreq[i] <= svsb->freq_base) {
+ svsb->vbin_turn_pt = i;
+ break;
+ }
+ }
+
+ /* Override svs bank voltages */
+ for (i = 1; i < svsb->vbin_turn_pt; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[0],
+ svsb->freq_pct[svsb->vbin_turn_pt],
+ svsb->volt[0],
+ svsb->volt[svsb->vbin_turn_pt],
+ svsb->freq_pct[i]);
+ }
}
static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
@@ -1560,7 +1595,12 @@ static int svs_bank_resource_setup(struct svs_platform *svsp)
svsb->name = "SVSB_CPU_LITTLE";
break;
case SVSB_CPU_BIG:
- svsb->name = "SVSB_CPU_BIG";
+ if (svsb->type == SVSB_HIGH)
+ svsb->name = "SVSB_CPU_BIG_HIGH";
+ else if (svsb->type == SVSB_LOW)
+ svsb->name = "SVSB_CPU_BIG_LOW";
+ else
+ svsb->name = "SVSB_CPU_BIG";
break;
case SVSB_CCI:
svsb->name = "SVSB_CCI";
@@ -1723,6 +1763,103 @@ static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
return true;
}
+static bool svs_mt8186_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct nvmem_cell *cell;
+ u32 idx, i, golden_temp;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[0]) {
+ dev_notice(svsp->dev, "svs_efuse[0] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_BIG:
+ if (svsb->type == SVSB_HIGH) {
+ svsb->mdes = (svsp->efuse[2] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[2] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[2] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[13] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[13] & GENMASK(7, 0);
+ } else if (svsb->type == SVSB_LOW) {
+ svsb->mdes = (svsp->efuse[3] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[3] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[3] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[14] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[14] >> 16) & GENMASK(7, 0);
+ }
+ break;
+ case SVSB_CPU_LITTLE:
+ svsb->mdes = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[4] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[14] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[14] & GENMASK(7, 0);
+ break;
+ case SVSB_CCI:
+ svsb->mdes = (svsp->efuse[5] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[15] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[15] >> 16) & GENMASK(7, 0);
+ break;
+ case SVSB_GPU:
+ svsb->mdes = (svsp->efuse[6] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[6] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[6] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[15] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[15] & GENMASK(7, 0);
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return false;
+ }
+
+ svsb->vmax += svsb->dvt_fixed;
+ }
+
+ /* Thermal efuse parsing */
+ cell = nvmem_cell_get(svsp->dev, "t-calibration-data");
+ if (IS_ERR_OR_NULL(cell)) {
+ dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n",
+ PTR_ERR(cell));
+ return false;
+ }
+
+ svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max);
+ if (IS_ERR(svsp->tefuse)) {
+ dev_err(svsp->dev, "cannot read thermal efuse: %ld\n",
+ PTR_ERR(svsp->tefuse));
+ nvmem_cell_put(cell);
+ return false;
+ }
+
+ svsp->tefuse_max /= sizeof(u32);
+ nvmem_cell_put(cell);
+
+ golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
+ if (!golden_temp)
+ golden_temp = 50;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = 409;
+ svsb->bts = (((500 * golden_temp + 204650) / 1000) - 25) * 4;
+ }
+
+ return true;
+}
+
static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
{
struct svs_bank *svsb;
@@ -2041,6 +2178,50 @@ static int svs_mt8192_platform_probe(struct svs_platform *svsp)
return 0;
}
+static int svs_mt8186_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst");
+ if (IS_ERR(svsp->rst))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
+ "cannot get svs reset control\n");
+
+ dev = svs_add_device_link(svsp, "lvts");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get lvts device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ case SVSB_CPU_BIG:
+ svsb->opp_dev = get_cpu_device(svsb->cpu_id);
+ break;
+ case SVSB_CCI:
+ svsb->opp_dev = svs_add_device_link(svsp, "cci");
+ break;
+ case SVSB_GPU:
+ svsb->opp_dev = svs_add_device_link(svsp, "mali");
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return -EINVAL;
+ }
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
+
static int svs_mt8183_platform_probe(struct svs_platform *svsp)
{
struct device *dev;
@@ -2135,6 +2316,149 @@ static struct svs_bank svs_mt8192_banks[] = {
},
};
+static struct svs_bank svs_mt8186_banks[] = {
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .type = SVSB_LOW,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .cpu_id = 6,
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
+ .mode_support = SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1670000000,
+ .turn_freq_base = 1670000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 4,
+ .vmax = 0x59,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x3,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0100,
+ .int_st = BIT(0),
+ .ctl0 = 0x00540003,
+ },
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .type = SVSB_HIGH,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .cpu_id = 6,
+ .tzone_name = "cpu_big0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 2050000000,
+ .turn_freq_base = 1670000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 4,
+ .vmax = 0x73,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0101,
+ .int_st = BIT(1),
+ .ctl0 = 0x00540003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_CPU_LITTLE,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 0,
+ .tzone_name = "cpu_zone0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 2000000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 3,
+ .vmax = 0x65,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0102,
+ .int_st = BIT(2),
+ .ctl0 = 0x3210000f,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_CCI,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .tzone_name = "cpu_zone0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1400000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 3,
+ .vmax = 0x65,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0103,
+ .int_st = BIT(3),
+ .ctl0 = 0x3210000f,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .tzone_name = "mfg",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 850000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x58,
+ .vmin = 0x20,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x4,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0104,
+ .int_st = BIT(4),
+ .ctl0 = 0x00100003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
+ },
+};
+
static struct svs_bank svs_mt8183_banks[] = {
{
.sw_id = SVSB_CPU_LITTLE,
@@ -2249,6 +2573,15 @@ static const struct svs_platform_data svs_mt8192_platform_data = {
.bank_max = ARRAY_SIZE(svs_mt8192_banks),
};
+static const struct svs_platform_data svs_mt8186_platform_data = {
+ .name = "mt8186-svs",
+ .banks = svs_mt8186_banks,
+ .efuse_parsing = svs_mt8186_efuse_parsing,
+ .probe = svs_mt8186_platform_probe,
+ .regs = svs_regs_v2,
+ .bank_max = ARRAY_SIZE(svs_mt8186_banks),
+};
+
static const struct svs_platform_data svs_mt8183_platform_data = {
.name = "mt8183-svs",
.banks = svs_mt8183_banks,
@@ -2263,6 +2596,9 @@ static const struct of_device_id svs_of_match[] = {
{
.compatible = "mediatek,mt8192-svs",
.data = &svs_mt8192_platform_data,
+ }, {
+ .compatible = "mediatek,mt8186-svs",
+ .data = &svs_mt8186_platform_data,
}, {
.compatible = "mediatek,mt8183-svs",
.data = &svs_mt8183_platform_data,
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: jia-wei.chang <jia-wei.chang@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Roger Lu <roger.lu@mediatek.com>,
Kevin Hilman <khilman@kernel.org>,
Jia-Wei Chang <jia-wei.chang@mediatek.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>,
<hsinyi@google.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Subject: [PATCH v5 2/4] soc: mediatek: svs: add support for mt8186
Date: Tue, 23 Aug 2022 15:17:06 +0800 [thread overview]
Message-ID: <20220823071708.30927-3-jia-wei.chang@mediatek.com> (raw)
In-Reply-To: <20220823071708.30927-1-jia-wei.chang@mediatek.com>
From: Jia-Wei Chang <jia-wei.chang@mediatek.com>
MT8186 svs has a number of banks which used as optimization of opp
voltage table for corresponding dvfs drivers.
MT8186 svs big core uses 2-line high bank and low bank to optimize the
voltage of opp table for higher and lower frequency respectively.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/soc/mediatek/mtk-svs.c | 350 ++++++++++++++++++++++++++++++++-
1 file changed, 343 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index dee8664a12fd..03e0a591359c 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -355,6 +355,7 @@ struct svs_platform_data {
* @dcbdet: svs efuse data
* @dcmdet: svs efuse data
* @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
+ * @vbin_turn_pt: voltage bin turn point helps know which svsb_volt should be overridden
* @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
*
* Svs bank will generate suitalbe voltages by below general math equation
@@ -417,6 +418,7 @@ struct svs_bank {
u32 dcbdet;
u32 dcmdet;
u32 turn_pt;
+ u32 vbin_turn_pt;
u32 type;
};
@@ -692,11 +694,12 @@ static int svs_status_debug_show(struct seq_file *m, void *v)
ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
if (ret)
- seq_printf(m, "%s: temperature ignore, turn_pt = %u\n",
- svsb->name, svsb->turn_pt);
+ seq_printf(m, "%s: temperature ignore, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, svsb->vbin_turn_pt, svsb->turn_pt);
else
- seq_printf(m, "%s: temperature = %d, turn_pt = %u\n",
- svsb->name, tzone_temp, svsb->turn_pt);
+ seq_printf(m, "%s: temperature = %d, vbin_turn_pt = %u, turn_pt = %u\n",
+ svsb->name, tzone_temp, svsb->vbin_turn_pt,
+ svsb->turn_pt);
for (i = 0; i < svsb->opp_count; i++) {
opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
@@ -889,9 +892,11 @@ static void svs_get_bank_volts_v3(struct svs_platform *svsp)
opp_stop = svsb->opp_count;
}
- for (i = opp_start; i < opp_stop; i++)
+ for (i = opp_start; i < opp_stop; i++) {
if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
svsb->volt[i] -= svsb->dvt_fixed;
+ svsb->volt[i] += svsb->volt_od;
+ }
}
static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
@@ -982,6 +987,10 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
struct svs_bank *svsb = svsp->pbank;
u32 temp, i;
+ if (svsb->phase == SVSB_PHASE_MON &&
+ svsb->volt_flags & SVSB_MON_VOLT_IGNORE)
+ return;
+
temp = svs_readl_relaxed(svsp, VOP74);
svsb->volt[14] = (temp >> 24) & GENMASK(7, 0);
svsb->volt[12] = (temp >> 16) & GENMASK(7, 0);
@@ -1007,8 +1016,34 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
svsb->volt[14],
svsb->freq_pct[15]);
- for (i = 0; i < svsb->opp_count; i++)
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
+ svsb->volt[i] -= svsb->dvt_fixed;
svsb->volt[i] += svsb->volt_od;
+ }
+
+ /* For voltage bin support */
+ if (svsb->opp_dfreq[0] > svsb->freq_base) {
+ svsb->volt[0] = svs_opp_volt_to_bank_volt(svsb->opp_dvolt[0],
+ svsb->volt_step,
+ svsb->volt_base);
+
+ /* Find voltage bin turn point */
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->opp_dfreq[i] <= svsb->freq_base) {
+ svsb->vbin_turn_pt = i;
+ break;
+ }
+ }
+
+ /* Override svs bank voltages */
+ for (i = 1; i < svsb->vbin_turn_pt; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[0],
+ svsb->freq_pct[svsb->vbin_turn_pt],
+ svsb->volt[0],
+ svsb->volt[svsb->vbin_turn_pt],
+ svsb->freq_pct[i]);
+ }
}
static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
@@ -1560,7 +1595,12 @@ static int svs_bank_resource_setup(struct svs_platform *svsp)
svsb->name = "SVSB_CPU_LITTLE";
break;
case SVSB_CPU_BIG:
- svsb->name = "SVSB_CPU_BIG";
+ if (svsb->type == SVSB_HIGH)
+ svsb->name = "SVSB_CPU_BIG_HIGH";
+ else if (svsb->type == SVSB_LOW)
+ svsb->name = "SVSB_CPU_BIG_LOW";
+ else
+ svsb->name = "SVSB_CPU_BIG";
break;
case SVSB_CCI:
svsb->name = "SVSB_CCI";
@@ -1723,6 +1763,103 @@ static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
return true;
}
+static bool svs_mt8186_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct nvmem_cell *cell;
+ u32 idx, i, golden_temp;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[0]) {
+ dev_notice(svsp->dev, "svs_efuse[0] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_BIG:
+ if (svsb->type == SVSB_HIGH) {
+ svsb->mdes = (svsp->efuse[2] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[2] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[2] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[13] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[13] & GENMASK(7, 0);
+ } else if (svsb->type == SVSB_LOW) {
+ svsb->mdes = (svsp->efuse[3] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[3] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[3] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[14] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[14] >> 16) & GENMASK(7, 0);
+ }
+ break;
+ case SVSB_CPU_LITTLE:
+ svsb->mdes = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[4] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[14] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[14] & GENMASK(7, 0);
+ break;
+ case SVSB_CCI:
+ svsb->mdes = (svsp->efuse[5] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[15] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[15] >> 16) & GENMASK(7, 0);
+ break;
+ case SVSB_GPU:
+ svsb->mdes = (svsp->efuse[6] >> 24) & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[6] >> 16) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[6] & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[15] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = svsp->efuse[15] & GENMASK(7, 0);
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return false;
+ }
+
+ svsb->vmax += svsb->dvt_fixed;
+ }
+
+ /* Thermal efuse parsing */
+ cell = nvmem_cell_get(svsp->dev, "t-calibration-data");
+ if (IS_ERR_OR_NULL(cell)) {
+ dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n",
+ PTR_ERR(cell));
+ return false;
+ }
+
+ svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max);
+ if (IS_ERR(svsp->tefuse)) {
+ dev_err(svsp->dev, "cannot read thermal efuse: %ld\n",
+ PTR_ERR(svsp->tefuse));
+ nvmem_cell_put(cell);
+ return false;
+ }
+
+ svsp->tefuse_max /= sizeof(u32);
+ nvmem_cell_put(cell);
+
+ golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
+ if (!golden_temp)
+ golden_temp = 50;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = 409;
+ svsb->bts = (((500 * golden_temp + 204650) / 1000) - 25) * 4;
+ }
+
+ return true;
+}
+
static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
{
struct svs_bank *svsb;
@@ -2041,6 +2178,50 @@ static int svs_mt8192_platform_probe(struct svs_platform *svsp)
return 0;
}
+static int svs_mt8186_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst");
+ if (IS_ERR(svsp->rst))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
+ "cannot get svs reset control\n");
+
+ dev = svs_add_device_link(svsp, "lvts");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get lvts device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ case SVSB_CPU_BIG:
+ svsb->opp_dev = get_cpu_device(svsb->cpu_id);
+ break;
+ case SVSB_CCI:
+ svsb->opp_dev = svs_add_device_link(svsp, "cci");
+ break;
+ case SVSB_GPU:
+ svsb->opp_dev = svs_add_device_link(svsp, "mali");
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return -EINVAL;
+ }
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
+
static int svs_mt8183_platform_probe(struct svs_platform *svsp)
{
struct device *dev;
@@ -2135,6 +2316,149 @@ static struct svs_bank svs_mt8192_banks[] = {
},
};
+static struct svs_bank svs_mt8186_banks[] = {
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .type = SVSB_LOW,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .cpu_id = 6,
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
+ .mode_support = SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1670000000,
+ .turn_freq_base = 1670000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 4,
+ .vmax = 0x59,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x3,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0100,
+ .int_st = BIT(0),
+ .ctl0 = 0x00540003,
+ },
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .type = SVSB_HIGH,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .cpu_id = 6,
+ .tzone_name = "cpu_big0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 2050000000,
+ .turn_freq_base = 1670000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 4,
+ .vmax = 0x73,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0101,
+ .int_st = BIT(1),
+ .ctl0 = 0x00540003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_CPU_LITTLE,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 0,
+ .tzone_name = "cpu_zone0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 2000000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 3,
+ .vmax = 0x65,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0102,
+ .int_st = BIT(2),
+ .ctl0 = 0x3210000f,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_CCI,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .tzone_name = "cpu_zone0",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1400000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .volt_od = 3,
+ .vmax = 0x65,
+ .vmin = 0x20,
+ .age_config = 0x1,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0103,
+ .int_st = BIT(3),
+ .ctl0 = 0x3210000f,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 8,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .tzone_name = "mfg",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 850000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x58,
+ .vmin = 0x20,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x4,
+ .vco = 0x10,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0104,
+ .int_st = BIT(4),
+ .ctl0 = 0x00100003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 8,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
+ },
+};
+
static struct svs_bank svs_mt8183_banks[] = {
{
.sw_id = SVSB_CPU_LITTLE,
@@ -2249,6 +2573,15 @@ static const struct svs_platform_data svs_mt8192_platform_data = {
.bank_max = ARRAY_SIZE(svs_mt8192_banks),
};
+static const struct svs_platform_data svs_mt8186_platform_data = {
+ .name = "mt8186-svs",
+ .banks = svs_mt8186_banks,
+ .efuse_parsing = svs_mt8186_efuse_parsing,
+ .probe = svs_mt8186_platform_probe,
+ .regs = svs_regs_v2,
+ .bank_max = ARRAY_SIZE(svs_mt8186_banks),
+};
+
static const struct svs_platform_data svs_mt8183_platform_data = {
.name = "mt8183-svs",
.banks = svs_mt8183_banks,
@@ -2263,6 +2596,9 @@ static const struct of_device_id svs_of_match[] = {
{
.compatible = "mediatek,mt8192-svs",
.data = &svs_mt8192_platform_data,
+ }, {
+ .compatible = "mediatek,mt8186-svs",
+ .data = &svs_mt8186_platform_data,
}, {
.compatible = "mediatek,mt8183-svs",
.data = &svs_mt8183_platform_data,
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-23 8:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-23 7:17 [PATCH v5 0/4] soc: mediatek: svs: add support for mt8186 and jia-wei.chang
2022-08-23 7:17 ` jia-wei.chang
2022-08-23 7:17 ` [PATCH v5 1/4] dt-bindings: soc: mediatek: add mt8186 svs dt-bindings jia-wei.chang
2022-08-23 7:17 ` jia-wei.chang
2022-08-23 7:17 ` jia-wei.chang [this message]
2022-08-23 7:17 ` [PATCH v5 2/4] soc: mediatek: svs: add support for mt8186 jia-wei.chang
2022-08-23 7:17 ` [PATCH v5 3/4] dt-bindings: soc: mediatek: add mt8195 svs dt-bindings jia-wei.chang
2022-08-23 7:17 ` jia-wei.chang
2022-08-23 7:17 ` [PATCH v5 4/4] soc: mediatek: svs: add support for mt8195 jia-wei.chang
2022-08-23 7:17 ` jia-wei.chang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220823071708.30927-3-jia-wei.chang@mediatek.com \
--to=jia-wei.chang@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@google.com \
--cc=khilman@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=roger.lu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.