All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johannes Zink <j.zink@pengutronix.de>
To: linux-fpga@vger.kernel.org
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Moritz Fischer <mdf@kernel.org>, Wu Hao <hao.wu@intel.com>,
	Xu Yilun <yilun.xu@intel.com>,
	kernel@pengutronix.de, Johannes Zink <j.zink@pengutronix.de>
Subject: [PATCH 14/16] fpga: machxo2: add program initialization signalling via gpio
Date: Thu, 25 Aug 2022 16:13:41 +0200	[thread overview]
Message-ID: <20220825141343.1375690-15-j.zink@pengutronix.de> (raw)
In-Reply-To: <20220825141343.1375690-1-j.zink@pengutronix.de>

Before initiating the programming sequence, this patch generates a low
pulse on FPGA's program_n pin which enables the FPGA's in circuit
programming interface.

Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
---
 drivers/fpga/machxo2-common.c | 15 +++++++++++++++
 drivers/fpga/machxo2-common.h |  1 +
 2 files changed, 16 insertions(+)

diff --git a/drivers/fpga/machxo2-common.c b/drivers/fpga/machxo2-common.c
index d93c304cceb9..ccf9a50fc590 100644
--- a/drivers/fpga/machxo2-common.c
+++ b/drivers/fpga/machxo2-common.c
@@ -167,6 +167,17 @@ static int machxo2_write_init(struct fpga_manager *mgr,
 		return -ENOTSUPP;
 	}
 
+	if (priv->fpga_program_n) {
+		/* set fpga in program mode. The timing is chosen very
+		 * conservatively, since the MachXO2 Family Datasheet
+		 * indicates a low pulse longer than 55ns will be accepted
+		 */
+		gpiod_set_value_cansleep(priv->fpga_program_n, 1);
+		usleep_range(1000, 1500);
+		gpiod_set_value_cansleep(priv->fpga_program_n, 0);
+		usleep_range(1000, 1500);
+	}
+
 	priv->get_status(priv, &status);
 	dump_status_reg(priv->dev, status);
 
@@ -331,6 +342,10 @@ int machxo2_common_init(struct machxo2_common_priv *priv, struct device *dev)
 
 	priv->erase_cmd = cpu_to_be32(erase_cmd);
 
+	priv->fpga_program_n = devm_gpiod_get_optional(dev,
+						       "lattice,program",
+						       GPIOD_OUT_LOW);
+
 	priv->dev = dev;
 
 	mgr = devm_fpga_mgr_register(dev, "Lattice MachXO2 SPI FPGA Manager",
diff --git a/drivers/fpga/machxo2-common.h b/drivers/fpga/machxo2-common.h
index 1b54154f91b1..0f9f53b48152 100644
--- a/drivers/fpga/machxo2-common.h
+++ b/drivers/fpga/machxo2-common.h
@@ -32,6 +32,7 @@ struct machxo2_common_priv {
 	int (*get_status)(struct machxo2_common_priv *priv, u32 *status);
 	struct device *dev;
 	__be32 erase_cmd;
+	struct gpio_desc *fpga_program_n;
 };
 
 int machxo2_common_init(struct machxo2_common_priv *priv, struct device *dev);
-- 
2.30.2


  parent reply	other threads:[~2022-08-25 14:14 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-25 14:13 [PATCH 00/16] Add support for Lattice MachXO2 programming via I2C Johannes Zink
2022-08-25 14:13 ` [PATCH 01/16] dt-bindings: fpga: convert Lattice MachXO2 Slave binding to YAML Johannes Zink
2022-08-30 20:30   ` Rob Herring
2022-08-31  7:12     ` Johannes Zink
2022-08-25 14:13 ` [PATCH 02/16] dt-bindings: fpga: machxo2-slave: add erasure properties Johannes Zink
2022-08-29  7:39   ` Xu Yilun
     [not found]     ` <9d5512768acb4d57f339942007402a9ed9483e84.camel@pengutronix.de>
     [not found]       ` <YwzWt8KjyfdyqehI@yilunxu-OptiPlex-7050>
2022-08-31  7:38         ` Johannes Zink
2022-09-03 14:49           ` Xu Yilun
2022-08-30 20:36   ` Rob Herring
2022-08-31  7:07     ` Johannes Zink
2022-08-25 14:13 ` [PATCH 03/16] dt-bindings: fpga: machxo2-slave: add pin for program sequence init Johannes Zink
2022-08-25 18:51   ` Rob Herring
2022-08-26  7:56     ` Johannes Zink
2022-08-29  7:45   ` Xu Yilun
     [not found]     ` <a42d72cd71c96ca675f5bb0cf59128c7f1cb04bb.camel@pengutronix.de>
     [not found]       ` <YwzZYM6GU0GiqBiq@yilunxu-OptiPlex-7050>
2022-08-31  7:51         ` Johannes Zink
2022-08-31  8:08           ` Johannes Zink
2022-08-25 14:13 ` [PATCH 04/16] dt-bindings: fpga: machxo2-slave: add lattice,machxo2-slave-i2c compatible Johannes Zink
2022-08-30 20:40   ` Rob Herring
2022-08-31  7:10     ` Johannes Zink
2022-08-25 14:13 ` [PATCH 05/16] fpga: machxo2-spi: remove #ifdef DEBUG Johannes Zink
2022-08-25 14:13 ` [PATCH 06/16] fpga: machxo2-spi: factor out status check for readability Johannes Zink
2022-08-25 14:13 ` [PATCH 07/16] fpga: machxo2-spi: fix big-endianness incompatibility Johannes Zink
2022-08-29  8:19   ` Xu Yilun
2022-08-29 10:41     ` Johannes Zink
2022-08-25 14:13 ` [PATCH 08/16] fpga: machxo2-spi: simplify with spi_sync_transfer() Johannes Zink
2022-08-25 14:13 ` [PATCH 09/16] fpga: machxo2-spi: simplify spi write commands Johannes Zink
2022-08-25 14:13 ` [PATCH 10/16] fpga: machxo2-spi: prepare extraction of common code Johannes Zink
2022-08-25 14:13 ` [PATCH 11/16] fpga: machxo2: move non-spi-related functionality to " Johannes Zink
2022-08-25 14:13 ` [PATCH 12/16] fpga: machxo2: improve status register dump Johannes Zink
2022-08-25 14:13 ` [PATCH 13/16] fpga: machxo2: add optional additional flash areas to be erased Johannes Zink
2022-08-25 14:13 ` Johannes Zink [this message]
2022-08-25 14:13 ` [PATCH 15/16] fpga: machxo2: extend erase timeout for machxo2 FPGA Johannes Zink
2022-08-29  9:26   ` Xu Yilun
2022-08-29 10:51     ` Johannes Zink
2022-08-29 14:57       ` Xu Yilun
2022-08-31  7:56         ` Johannes Zink
2022-08-25 14:13 ` [PATCH 16/16] fpga: machxo2: add configuration over i2c Johannes Zink
2022-08-29  9:47   ` Xu Yilun
2022-08-29 13:21     ` Johannes Zink
2022-08-29 14:45       ` Xu Yilun
2022-08-31 16:07         ` Johannes Zink
2022-08-25 15:25 ` [PATCH 00/16] Add support for Lattice MachXO2 programming via I2C Ivan Bornyakov
2022-08-26  6:32   ` Johannes Zink
2022-08-26  8:15     ` Ivan Bornyakov
2022-08-26  8:25   ` Sascha Hauer
2022-08-26  9:00     ` Ivan Bornyakov
2022-08-26  9:19       ` Ivan Bornyakov
2022-08-26 15:26         ` Xu Yilun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220825141343.1375690-15-j.zink@pengutronix.de \
    --to=j.zink@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hao.wu@intel.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-fpga@vger.kernel.org \
    --cc=mdf@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=yilun.xu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.