All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v3 4/9] ARM: dts: uniphier: Rename gpio-hog node
Date: Tue, 13 Sep 2022 13:22:44 +0900	[thread overview]
Message-ID: <20220913042249.4708-5-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <20220913042249.4708-1-hayashi.kunihiko@socionext.com>

According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.

  uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
      From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml

This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 arch/arm/boot/dts/uniphier-ld4-ref.dts  | 2 +-
 arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +-
 arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +-
 arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index c46c2e8a10a7..e2d25c9160bd 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -56,7 +56,7 @@ &serial3 {
 };
 
 &gpio {
-	xirq1 {
+	xirq1-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 5bc7fe11b517..4f5e8848cecf 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -60,7 +60,7 @@ &serial2 {
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 3b9b61314d01..cc2cae935b5d 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -59,7 +59,7 @@ &serial2 {
 };
 
 &gpio {
-	xirq2 {
+	xirq2-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 6db949ec7411..b73647bafc63 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -56,7 +56,7 @@ &serial3 {
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v3 4/9] ARM: dts: uniphier: Rename gpio-hog node
Date: Tue, 13 Sep 2022 13:22:44 +0900	[thread overview]
Message-ID: <20220913042249.4708-5-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <20220913042249.4708-1-hayashi.kunihiko@socionext.com>

According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.

  uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
      From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml

This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 arch/arm/boot/dts/uniphier-ld4-ref.dts  | 2 +-
 arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +-
 arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +-
 arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index c46c2e8a10a7..e2d25c9160bd 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -56,7 +56,7 @@ &serial3 {
 };
 
 &gpio {
-	xirq1 {
+	xirq1-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 5bc7fe11b517..4f5e8848cecf 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -60,7 +60,7 @@ &serial2 {
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 3b9b61314d01..cc2cae935b5d 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -59,7 +59,7 @@ &serial2 {
 };
 
 &gpio {
-	xirq2 {
+	xirq2-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 6db949ec7411..b73647bafc63 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -56,7 +56,7 @@ &serial3 {
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-09-13  4:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-13  4:22 [PATCH v3 0/9] Update UniPhier armv7 devicetree Kunihiko Hayashi
2022-09-13  4:22 ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 1/9] ARM: dts: uniphier: Rename pvtctl node to thermal-sensor Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 2/9] ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 3/9] ARM: dts: uniphier: Rename usb-glue node for USB3 " Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` Kunihiko Hayashi [this message]
2022-09-13  4:22   ` [PATCH v3 4/9] ARM: dts: uniphier: Rename gpio-hog node Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 5/9] ARM: dts: uniphier: Use GIC interrupt definitions Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 6/9] ARM: dts: uniphier: Add ahci controller nodes for Pro4 Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 7/9] ARM: dts: uniphier: Add ahci controller nodes for PXs2 Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 8/9] ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-13  4:22 ` [PATCH v3 9/9] ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node Kunihiko Hayashi
2022-09-13  4:22   ` Kunihiko Hayashi
2022-09-28 21:00 ` [PATCH v3 0/9] Update UniPhier armv7 devicetree patchwork-bot+linux-soc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220913042249.4708-5-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhiramat@kernel.org \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.