From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] i.MX fixes for 6.0, 2nd round
Date: Wed, 14 Sep 2022 11:58:01 +0800 [thread overview]
Message-ID: <20220914035801.GK1728671@dragon> (raw)
In-Reply-To: <20220913025043.GH1728671@dragon>
On Tue, Sep 13, 2022 at 10:50:49AM +0800, Shawn Guo wrote:
> The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d:
>
> arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2
>
> for you to fetch changes up to c1f84a75babecd9fa11f128f2da8991e2f8fb179:
>
> arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-13 10:23:48 +0800)
>
> ----------------------------------------------------------------
> i.MX fixes for 6.0, 2nd round:
>
> - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
> GPIOs and PCF85063 RTC alarm pinctrl.
> - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
> build errors when this SoM dtsi is included on customer carrier boards.
> - Remove GPU power domain reset from i.MX8MN device tree to fix
> a sporadical hang seen with GPUMIX powering up.
> - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
> board.
> - Add ARCH_NXP back to defconfig, which was dropped accidentally by
> commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
> together").
> - Add missing #reset-cells for i.MX8ULP PCC clock controllers.
> - Update PMIC voltages for imx8mm-verdin board to fix an issue with one
> Toradex SKU that uses a consumer-grade chip that is capable of going up
> to 1.8GHz at 1.00V.
> - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
> to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
> phy-mode.
>
> ----------------------------------------------------------------
> Alexander Stein (2):
> arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
> arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
>
> Fabio Estevam (1):
> arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
>
> Marco Felsch (1):
> arm64: dts: imx8mn: remove GPU power domain reset
>
> Marek Vasut (1):
> arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
>
> Michael Walle (1):
> arm64: defconfig: enable ARCH_NXP
>
> Peng Fan (1):
> arm64: dts: imx8ulp: add #reset-cells for pcc
>
> Philippe Schenker (1):
> arm64: dts: imx8mm-verdin: extend pmic voltages
>
> Tim Harvey (3):
> arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
> arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
> arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
The Fixes tag in this commit had a minor format issue. I fixed it up
and thus updated the PR as blow.
Shawn
The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d:
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2
for you to fetch changes up to f7fc391a5e28216150ab5390df35032309ead7e5:
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-14 11:45:09 +0800)
----------------------------------------------------------------
i.MX fixes for 6.0, 2nd round:
- A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
GPIOs and PCF85063 RTC alarm pinctrl.
- Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
build errors when this SoM dtsi is included on customer carrier boards.
- Remove GPU power domain reset from i.MX8MN device tree to fix
a sporadical hang seen with GPUMIX powering up.
- Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
board.
- Add ARCH_NXP back to defconfig, which was dropped accidentally by
commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
together").
- Add missing #reset-cells for i.MX8ULP PCC clock controllers.
- Update PMIC voltages for imx8mm-verdin board to fix an issue with one
Toradex SKU that uses a consumer-grade chip that is capable of going up
to 1.8GHz at 1.00V.
- A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
phy-mode.
----------------------------------------------------------------
Alexander Stein (2):
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
Fabio Estevam (1):
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
Marco Felsch (1):
arm64: dts: imx8mn: remove GPU power domain reset
Marek Vasut (1):
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
Michael Walle (1):
arm64: defconfig: enable ARCH_NXP
Peng Fan (1):
arm64: dts: imx8ulp: add #reset-cells for pcc
Philippe Schenker (1):
arm64: dts: imx8mm-verdin: extend pmic voltages
Tim Harvey (3):
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 10 +++++-----
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 1 -
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 10 ++++++++--
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 12 ++++++++----
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 3 +++
arch/arm64/configs/defconfig | 1 +
9 files changed, 31 insertions(+), 18 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] i.MX fixes for 6.0, 2nd round
Date: Wed, 14 Sep 2022 11:58:01 +0800 [thread overview]
Message-ID: <20220914035801.GK1728671@dragon> (raw)
In-Reply-To: <20220913025043.GH1728671@dragon>
On Tue, Sep 13, 2022 at 10:50:49AM +0800, Shawn Guo wrote:
> The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d:
>
> arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2
>
> for you to fetch changes up to c1f84a75babecd9fa11f128f2da8991e2f8fb179:
>
> arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-13 10:23:48 +0800)
>
> ----------------------------------------------------------------
> i.MX fixes for 6.0, 2nd round:
>
> - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
> GPIOs and PCF85063 RTC alarm pinctrl.
> - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
> build errors when this SoM dtsi is included on customer carrier boards.
> - Remove GPU power domain reset from i.MX8MN device tree to fix
> a sporadical hang seen with GPUMIX powering up.
> - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
> board.
> - Add ARCH_NXP back to defconfig, which was dropped accidentally by
> commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
> together").
> - Add missing #reset-cells for i.MX8ULP PCC clock controllers.
> - Update PMIC voltages for imx8mm-verdin board to fix an issue with one
> Toradex SKU that uses a consumer-grade chip that is capable of going up
> to 1.8GHz at 1.00V.
> - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
> to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
> phy-mode.
>
> ----------------------------------------------------------------
> Alexander Stein (2):
> arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
> arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
>
> Fabio Estevam (1):
> arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
>
> Marco Felsch (1):
> arm64: dts: imx8mn: remove GPU power domain reset
>
> Marek Vasut (1):
> arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
>
> Michael Walle (1):
> arm64: defconfig: enable ARCH_NXP
>
> Peng Fan (1):
> arm64: dts: imx8ulp: add #reset-cells for pcc
>
> Philippe Schenker (1):
> arm64: dts: imx8mm-verdin: extend pmic voltages
>
> Tim Harvey (3):
> arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
> arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
> arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
The Fixes tag in this commit had a minor format issue. I fixed it up
and thus updated the PR as blow.
Shawn
The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d:
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2
for you to fetch changes up to f7fc391a5e28216150ab5390df35032309ead7e5:
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-14 11:45:09 +0800)
----------------------------------------------------------------
i.MX fixes for 6.0, 2nd round:
- A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
GPIOs and PCF85063 RTC alarm pinctrl.
- Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
build errors when this SoM dtsi is included on customer carrier boards.
- Remove GPU power domain reset from i.MX8MN device tree to fix
a sporadical hang seen with GPUMIX powering up.
- Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
board.
- Add ARCH_NXP back to defconfig, which was dropped accidentally by
commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
together").
- Add missing #reset-cells for i.MX8ULP PCC clock controllers.
- Update PMIC voltages for imx8mm-verdin board to fix an issue with one
Toradex SKU that uses a consumer-grade chip that is capable of going up
to 1.8GHz at 1.00V.
- A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
phy-mode.
----------------------------------------------------------------
Alexander Stein (2):
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
Fabio Estevam (1):
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
Marco Felsch (1):
arm64: dts: imx8mn: remove GPU power domain reset
Marek Vasut (1):
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
Michael Walle (1):
arm64: defconfig: enable ARCH_NXP
Peng Fan (1):
arm64: dts: imx8ulp: add #reset-cells for pcc
Philippe Schenker (1):
arm64: dts: imx8mm-verdin: extend pmic voltages
Tim Harvey (3):
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 10 +++++-----
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 1 -
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 10 ++++++++--
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 12 ++++++++----
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 3 +++
arch/arm64/configs/defconfig | 1 +
9 files changed, 31 insertions(+), 18 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-14 3:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-13 2:50 [GIT PULL] i.MX fixes for 6.0, 2nd round Shawn Guo
2022-09-13 2:50 ` Shawn Guo
2022-09-14 3:58 ` Shawn Guo [this message]
2022-09-14 3:58 ` Shawn Guo
2022-09-15 20:20 ` patchwork-bot+linux-soc
2022-09-15 20:20 ` patchwork-bot+linux-soc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914035801.GK1728671@dragon \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.